Easy
Less than 15 minutes
This is a genuine OEM approved replacement part designed for use with Bissell upright vacuum cleaners. It spins to pick up the dust and dirt from the carpet. Over time, the bristles on rotating floor brush will wear. This part is made out of plastic and it is sold individually.
When replacing this part you will need a screwdriver.
• Remove access plate and take off the belt
• Remove old brush roller and snap the new one into place
• Connect belt to the spindle
• Secure the access plate
Brush Roll Assembly RO-JC0110
OEM part for: Dirt Devil, Royal
Part Number: RO-JC0110
$47.92
In Stock
Order within the next 7 hours and your part ships today! 
Product Description ?
- Classification: Part
- Weight: 0.85 lbs.
- Shipping: Ships Worldwide
Compatibility
This part will fit the following 4 machines
Dirt Devil
M088300 Vision Turbo Bagless Upright Vacuum View Diagrams & Manuals
M088400 Vision Turbo Bagless Upright Vacuum View Diagrams & Manuals
M088450 Vision Turbo Bagless Upright Vacuum View Diagrams & Manuals
Royal
RY6100 Bagless Commercial Upright View Diagrams & Manuals
This item works with the following types of products:
- Vacuum Parts
This part replaces obsolete part #: 2JC0110000, 1881095000
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Part that I needed
Ordering was easy, delivery quick and in great condition.
Guest -
August 30, 2019
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Brush Roll Assembly
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
The bearing on the roller was worn beyond use.
Daryl - September 17, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Vacuum
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
1. Removed brush roll cover
2. Removed old brush roll
3. Installed new brush roll
4. Replaced brush roll cover
5. Checked brush roll clearance
6. Tested brush roll by turning on the vacuum and continuing use of it.
2. Removed old brush roll
3. Installed new brush roll
4. Replaced brush roll cover
5. Checked brush roll clearance
6. Tested brush roll by turning on the vacuum and continuing use of it.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The belt would burn up within 2min after turning it on
caleb - March 7, 2021
Tool Type
Vacuum
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Basically the old roll had gotten stuck or in some cycle were it wore down the sides that would spin on the bottom plate. This caused uneven rotation and therefore the belt would not be perfectly situated on the roll point. When it slide off, the driving gear/rod would just melt the belt by friction because the belt couldn't move.
Repair:
1. unscrew bottom plate from vacuum
2. remove old roller and belt
3. place belt on gear pin and place over roller
4. place the roller's end that is away from the belt in the holder
5. using that leverage, stretch the belt to get the other side of the roller in place
6. screw back on the bottom plate
7. use
Repair:
1. unscrew bottom plate from vacuum
2. remove old roller and belt
3. place belt on gear pin and place over roller
4. place the roller's end that is away from the belt in the holder
5. using that leverage, stretch the belt to get the other side of the roller in place
6. screw back on the bottom plate
7. use
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Vacuum repair.
David - June 29, 2017
👍 0 of 1 people found this instruction helpful
Tool Type
Vacuum
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Vacuum roller assembly seized up broke the belt. Removed the old one and attached the new one. Reassembled and tested.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
