eReplacementParts.com
877-346-4814
DeWALT Parts

Brush 5140033-19

OEM part for: DeWALT

Part Number: 5140033-19


Install
Videos!
Grid squares measure 1x1 inch
In Stock
Order within the next 7 hours and your part ships today!
Easy Less than 15 minutes (4 rated repairs)?
OEM: Original Equipment Manufacturer ?
DeWALT
Does this d-block d-md-none fit my product?

Product Description ?

Genuine DeWalt replacement part
rnIncludes 1 Carbon Brush with wire lead and brush spring attached.rn

• Worn brushes are often the cause of a poorly running motor
• Replacing brushes can fix an intermittent motor
• New brushes can restore a motor’s electric braking


Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

  • Classification: Part
  • Weight: 0.01 lbs.
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This part will fit the following 16 machines

DeWALT

DW745 Type 1 Table Saw View Diagrams & Manuals
DW745 Type 2 Table Saw View Diagrams & Manuals
DWE7499GD (Type 1) 10" Jobsite Table Saw View Diagrams & Manuals
DWE7480 (Type 1) 10" Compact Job Site Table Saw View Diagrams & Manuals
DWE7490X (Type 1) 10" Job Site Table Saw View Diagrams & Manuals
DWE7491RS (Type 1) 10" Jobsite Table Saw View Diagrams & Manuals
DW745 (Type 3) 10" Table Saw View Diagrams & Manuals
DW745-AR (Type 1) 10 Jobsite Saw Power Tool View Diagrams & Manuals
DW745-AR (Type 3) 10 Jobsite Saw Power Tool View Diagrams & Manuals
DW745-B2 (Type 1) 10 Jobsite Saw Power Tool View Diagrams & Manuals
DW745-B2 (Type 3) 10 Jobsite Saw Power Tool View Diagrams & Manuals
DW745 (Type 20) 10 In Table Saw Power Tool View Diagrams & Manuals
DWE7480 (Type 20) Table Saw Power Tool View Diagrams & Manuals
DWE7490X (Type 2) 10 Table Saw Power Tool View Diagrams & Manuals
DWE7491RS (Type 2) 10in Jobsite Tbl Saw Power Tool View Diagrams & Manuals
DWE7499GD (Type 2) 10 Table Saw Power Tool View Diagrams & Manuals
Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Saw Parts
  • Table Saw Parts

Repair Videos ?

Watch the Repair Video for Brush
Articles:
Step-by-step instructions for removing and installing the motor brushes on your DeWALT table saw....
September 05, 2017

Customer Part Reviews ?

5
Average Rating (out of 5):
5 Reviews
Click to filter by ratings:
5 stars
5
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Saw brush
    The part fit great. It breathed new life into my table saw. Ready to run another 50 miles of lumber through it hopefully.
    Guest - March 9, 2024 Verified Purchase
    Easy repair
    I’ve been using ereplacementparts for my tool repair needs for at least twenty years. Always prompt, never had a bad experience!
    Guest - April 18, 2023 Verified Purchase
    WENT GREAT
    ON TIME RIGHT PART
    Guest - June 28, 2022 Verified Purchase
    good brushes
    They look like good brushes. As always ,everything was fine.
    Guest - September 12, 2021 Verified Purchase
    Easy to install
    Great fit .
    Guest - June 19, 2019 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Brush


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Easy Less than 15 minutes (4 rated repairs)?

    The motor lost power and then stopped completely.

    Chuck - July 7, 2018
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Table Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Removed the plastic screw caps .
    The brushes easily lift out. One brush had a broken spring and appeared burned. Replaced with new brushes. Replaced screw caps.

    I was getting ready to buy another saw for $400 when a friend suggested that I try ereplacementparts.com. So glad I did. A $5 part completely fixed my saw !

    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Brushes were burnt

    William - May 29, 2023
    Tool Type

    Table Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver, None

    Removed the cap
    Removed brushes , inserted the new ones replaced the caps
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Saw didn't start

    Mariusz - March 3, 2020
    Tool Type

    Table Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    Removed the brush cap, insert new brush and reinstall brush cap.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    The cap came off while using it and therefore it just stopped working

    Levi - December 30, 2017
    Tool Type

    Table Saw

    Difficulty

    Easy

    Time

    Less than 15 minutes

    Tools Used

    Screwdriver

    It was super easy to replace the caps and while I was at it I just went ahead and replaced the brushes to . All it is is just pull the old brush out and stick the new one in and hold it in (as it is spring loaded)
    Then screw the cap on and it's done....
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal