Brush 176949-17
Part Number: 176949-17
Order within the next 13 hours
and your part ships today!
and your part ships today!
*This part replaces obsolete part #: 176949-03.
Product Information
Description:
This is an OEM Manufacturer Sourced replacement part used on certain Hammer Drills. Includes One (1) Carbon Brush with wire lead attached. Please note: this brush is sold individually and most tools would use Two of these carbon brushes. It is always best to replace both brushes, even if only one is worn. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems. |
Frequently Purchased With
Compatibility
the 35 compatible machines
This part is compatible with the following machines:
DeWALT
DW505 Type 1 Hammer Drill
DW505 Type 1 Hammer Drill
DW505 Type 2 Hammer Drill
DW505 Type 2 Hammer Drill
DW511 Type 1 1/2" VSR Hammer Drill
DW511 Type 1 1/2" VSR Hammer Drill
DW505 Type 3 Hammer Drill
DW505 Type 3 Hammer Drill
DW511B Type 1 Hammer Drill
DW511B Type 1 Hammer Drill
DW511 Type 2 1/2" VSR Hammer Drill
DW511 Type 2 1/2" VSR Hammer Drill
DW511K Type 1 Hammer Drill
DW505 Type 1 Hammer Drill
DW505 Type 2 Hammer Drill
DW505 Type 2 Hammer Drill
DW511 Type 1 1/2" VSR Hammer Drill
DW511 Type 1 1/2" VSR Hammer Drill
DW505 Type 3 Hammer Drill
DW505 Type 3 Hammer Drill
DW511B Type 1 Hammer Drill
DW511B Type 1 Hammer Drill
DW511 Type 2 1/2" VSR Hammer Drill
DW511 Type 2 1/2" VSR Hammer Drill
DW511K Type 1 Hammer Drill
DW511K Type 1 Hammer Drill
DW511K Type 2 Hammer Drill
DW511K Type 2 Hammer Drill
DW511 Type 3 1/2" VSR Hammer Drill
DW511 Type 3 1/2" VSR Hammer Drill
DW505-B3 (Type 2) Hammer Drill Power Tool
DW505-B3 (Type 3) Hammer Drill Power Tool
DW505-BR (Type 2) Hammer Drill Power Tool
DW505-BR (Type 3) Hammer Drill Power Tool
DW505 (Type 4) Hammer Drill Power Tool
DW511 (Type 4) Drill Power Tool
DW511K (Type 3) Drill Power Tool
DW511K Type 2 Hammer Drill
DW511K Type 2 Hammer Drill
DW511 Type 3 1/2" VSR Hammer Drill
DW511 Type 3 1/2" VSR Hammer Drill
DW505-B3 (Type 2) Hammer Drill Power Tool
DW505-B3 (Type 3) Hammer Drill Power Tool
DW505-BR (Type 2) Hammer Drill Power Tool
DW505-BR (Type 3) Hammer Drill Power Tool
DW505 (Type 4) Hammer Drill Power Tool
DW511 (Type 4) Drill Power Tool
DW511K (Type 3) Drill Power Tool
Black and Decker
Products Compatibility
This item works with the following types of products:
- • Drill
- • Hammer Drill
Questions & Answers for Brush
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
2 of 3 people found this instruction helpful
Tool Type:
Hammer Drill
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Did not run
Removed the handle cover
Lifted the brush holder spring and placed it on the brush holder
Disconnected the brush
Connected the new brush, then replaced the spring
Did the same for the other side
Replaced the handle cover
Lifted the brush holder spring and placed it on the brush holder
Disconnected the brush
Connected the new brush, then replaced the spring
Did the same for the other side
Replaced the handle cover
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hammer Drill
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Brushes were worn
Pulled the old brushes out. Tried to fit the new ones in. Connectors were not same size as original connectors. The new ones would not fit in switch.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hammer Drill
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
My 1/2' Dewalt Hammer drill was smoking and not working right. replaced brushs and it's as good as new.
Removed the star drive screws.
removed the handle and the trigger assembly.
removed and plugged in the new brushes.
installed the new brushes into the holders.
reassembled the handle and trigger assembly.
works good as new.
I got the brushes in 3 days. great service, easy ordering.
the parts manual was spot on.
removed the handle and the trigger assembly.
removed and plugged in the new brushes.
installed the new brushes into the holders.
reassembled the handle and trigger assembly.
works good as new.
I got the brushes in 3 days. great service, easy ordering.
the parts manual was spot on.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hammer Drill
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Power Drill
Brushes were bad.
Removed old brushes and put the new brushes in place.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hammer Drill
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Needed brushes
Took drill apart, removed the old brushes and secured the new ones. Reassembled the drill.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hammer Drill
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pliers
Speed of drill is slow
Remove handle ,install brushes , replace handle, that easy.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
2 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
1
< PREV
- 1
Easy repair ,great part, work great , fast delivery
it is in great condition arrived quickly
iGlobal -
August 11, 2021
Verified Purchase
brush
The brush had a different connector than the original. Annoying
Michael -
January 20, 2020
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information