eReplacementParts.com
877-346-4814
Makita Parts
Repair Parts Home  Power Tool Parts  Makita Parts  643653-8 Brush Holder
photo thumbnailphoto thumbnailphoto thumbnailphoto thumbnail
Brush Holder
Brush Holder
Brush Holder
Brush Holder

Brush Holder

Part Number: 643653-8
Makita
Availability: Special Order [ more info ]
Price: $4.54
Leaves our warehouse within
11 - 17 business days.

*This part replaces obsolete part #: 643660-1 and 6436601.

Product Information
Manufacturer: Makita
Product Number: 643653-8
Classification: Part
Weight: 0.04 lbs.
Shipping: Ships Worldwide
Description:
Included in part number 154719-4
Products Compatibility

This item works with the following types of products:

  • • Circular Saw
  • • Miter Saw
  • • Saw
  • • Table Saw
Questions & Answers

No questions have been asked yet
Discussion
Discussion for Brush Holder - ( 643653-8 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
Question: Replacing Brush Holders

rossscw

How are these attached? I can't get the old brush holders out of the housing.
Hi rossscw,
Generally that type of brush holder has a set screw that holds it in the housing.Hope that helps.Good luck.
Tinker
Question: Replacement

rossscw

How do you remove and replace these in a Makita 2705 table saw motor housing?
WJA
Hello rossscw,

The Makita 643660-1 Brush Holders are pressed into the housing. To remove them, place a punch from the outside of one of the brush holders and tap on the opposite brass on the brush holder so it pushes it out. Make note how far the holder is from the outside of the housing before you do this, so you can install the new brush holder back in the correct position. To install the new brush holder you should be able to insert it a bit by hand, make sure it is line up so that the brushes will line up with the armature(straight up and down). If you have an arbor press that would be the best way to get the holder in the housing. If not use a piece of wood and lightly tap the wood with a hammer until the holder is in its correct position.

-WJA
Question: How Do You Install New Brush Hol...

rossscw

It appears tbe brush holder is a part of the motor housing. How do you install a new one and how do you attach the garter springs to them?
Product Information
Manufacturer: Makita
Product Number: 643653-8
Classification: Part
Weight: 0.04 lbs.
Shipping: Ships Worldwide
Related Products
eReplacementParts.com
7036 South High Tech Dr.
Midvale, UT 84047
visa mastercard discover american express PayPal

fancyboxy