Brush And Spring Assembly 42584025000
Part Number: 42584025000
Order within the next 7 hours
and your part ships today!
and your part ships today!
*This part replaces obsolete part #: 42584-025.
Product Information
Description:
| Genuine Oster Pro replacement part, this product is sold in a set of two. It also includes the Brush Springs. It is used on the Clipper models shown below. Replacing brushes can fix a motor that’s operating intermittently. Carbon brushes are one of the most commonly replaced power tool parts. A worn-out brush will often be worn down and can be cracked, pitted, or burned. If a Brush is burned or scored, it is advised to inspect the armature and field for damage. |
Frequently Purchased With
Compatibility
This part is compatible with the following machines:
Products Compatibility
This item works with the following types of products:
- • Hair Clipper
Questions & Answers for Brush And Spring Assembly
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
1 of 1 people found this instruction helpful
Tool Type:
Hair Clipper
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, needle nose pliers
Stopped working
Un screw both sides pull out the cap,spring and brush. Install new in reverse.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hair Clipper
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Clippers would stop and start.
Told my wife to do it since it am terrible with springs.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hair Clipper
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Needle nose pliers
Switch and cord broke from being dropped.
Removed switch cover nut with pliers and cover plate with small phillips screwdriver, took a few pics for reference of wire placement. Removed two screws that held wires and removed switch and cord. Reversed that process and repair was finished. Replaced brush and spring assemblies and lubed clippers while on repair bench. Very simple repair and saved around $100 plus downtime.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hair Clipper
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Clipper repair
Replaced worn parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hair Clipper
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Worn brushes
Removed brush caps, removed springs and brushes, installed new springs and brushes, replaced caps.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hair Clipper
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Would not start
Removed both brush spring assemblies from either side, replaced them. Should have done this first, but didn't know what a brush spring assembly was until I you tubed it. Unfortunately this was after I replaced the power switch. Overall, didn't need to take the whole thing apart, so I was pleased with myself!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hair Clipper
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Brushes wore away to almost nothing
Unscrewed small caps that were over the bushes, removed the old worn out brushes dropped in the new brushes, and screwed the caps over them down snug..clippers are running like new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hair Clipper
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Needed new carbon brushes
Removed both brush caps and removed the worn brushes. Then installed the new brushes and replaced the brush caps. Now my clipper's work great. Thank you for sending the part so quickly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Hair Clipper
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
The blade assembly was worn and not holding blades securely. The clippers are about 2 yrs olde just need a cleaning a lil overhaul
No special instructions needed for installation.. It's nice that ereplacements has a diagram of the model... It could be a bit clearer but it did work.. I've had to use this site 3 or four times it is very useful.. I make money with my clippers it's good to be able to repair on my own and get back to business..
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 2 people found this instruction helpful
Tool Type:
Hair Clipper
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, needlenose pliers
Not powering up and clatter noise
Take top cover off by removing 2 screws, remove lever, clean out old grease, re-grease, install washer and lever, replace cover, remove brushes one at a time, replace, apply AC, and starts every time. Have less clatter then before therefore I may need another internal part, will investigate at a later time.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
show more
Reviews
4 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
3
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Very easy and fast
The ordering process was extremely easy. The prices were very reasonable and the parts were shipped right away. Will buy from them again!!!
Guest -
February 23, 2021
Verified Purchase
Exactly what we ordered
Came quickly and was the right part needed for the job. Thank you
Guest -
July 24, 2019
Verified Purchase
Great
Came promptly and quality product
Guest -
April 27, 2019
Verified Purchase
There are the good replaced parts .
I've received the right parts as needed, but the 10 packs of springs and bruhes set. There are missing 2 pairs of brushes, in this 2 packs packed springs only. Thanks any way.
Guest -
July 3, 2019
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information
