*This part replaces obsolete part #: 2610911871.
Product Information
Description:
This is an authentic replacement part manufactured for use with Bosch miter saws. The special screw is reverse or left-hand threaded and used to secure the blade to the spindle. This bolt is available as an individual replacement part, please see model diagram for associative parts. |
Compatibility
the 20 compatible machines
This part is compatible with the following machines:
Bosch
4412 (0601665039) 12" Miter Saw
4412 (0601665039) 12" Miter Saw
3915 (0601475039) 10 Inch Slide Miter Saw
3915 (0601475039) 10 Inch Slide Miter Saw
B3915 (0601475035) 10" Slide Miter Saw
B3915 (0601475035) 10" Slide Miter Saw
4212 (060166F035) Miter Saw
4212 (060166F035) Miter Saw
4410 (060166E139) Miter Saw
4410 (060166E139) Miter Saw
4412 (0601665039) 12" Miter Saw
3915 (0601475039) 10 Inch Slide Miter Saw
3915 (0601475039) 10 Inch Slide Miter Saw
B3915 (0601475035) 10" Slide Miter Saw
B3915 (0601475035) 10" Slide Miter Saw
4212 (060166F035) Miter Saw
4212 (060166F035) Miter Saw
4410 (060166E139) Miter Saw
4410 (060166E139) Miter Saw
4405 (0601475061) 10" Single-Bevel Slide Miter Saw
4405 (0601475061) 10" Single-Bevel Slide Miter Saw
GCM 10 SD (0601B22532) Slide Mitre Saw
GCM 10 SD (0601B22541) Slide Mitre Saw
GCM12SD (0601B23503) Slide Mitre Saw
GCM12SD (0601B23508) Slide Mitre Saw
GCM12SD (0601B23532) Slide Mitre Saw
GCM12SD (0601B23537) Slide Mitre Saw
GCM12SD (0601B23541) Slide Mitre Saw
GCM12SD (0601B23542) Slide Mitre Saw
4405 (0601475061) 10" Single-Bevel Slide Miter Saw
GCM 10 SD (0601B22532) Slide Mitre Saw
GCM 10 SD (0601B22541) Slide Mitre Saw
GCM12SD (0601B23503) Slide Mitre Saw
GCM12SD (0601B23508) Slide Mitre Saw
GCM12SD (0601B23532) Slide Mitre Saw
GCM12SD (0601B23537) Slide Mitre Saw
GCM12SD (0601B23541) Slide Mitre Saw
GCM12SD (0601B23542) Slide Mitre Saw
Products Compatibility
This item works with the following types of products:
- • Miter Saw
- • Saw
Questions & Answers for Bolt
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Miter Saw
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Socket set
My miter saw was missing parts, its why it was given to me..
Ok, SO I got and old 12" Craftsman Miter saw that someone was going to throw out. It was missing the two blade collars, the blade washer and the saw blade bolt. Looked up the item and found that ALL the parts were discontinued. I did not stop... I kept looking and I could not find the part numbers for the two blade collars... I did find a manual for the saw. IN the manual were all the numbers I needed. I searched for these numbers and found them listed for another saw, a RIGID of the same size. The left hand threaded bolt was hard to find anyplace... I was able to borrow one from a different saw I had, and it fit! So I ordered all the parts that had the same part number and the saw arbor bolt from a RIDGED saw and BOOM I have this very good saw back in service. The person I called helped me and said that Craftsman were made by RIDGED so the numbers of the parts were the same... The hardest part of this was finding the discontinued parts, matching their numbers. Putting it all together was a two minute job...
SO if you find an old saw or other tool, and it needs parts, dont give up, keep looking they are out there some place. Saw was back in action for less then 30 bucks shipping included... THANKS!!
SO if you find an old saw or other tool, and it needs parts, dont give up, keep looking they are out there some place. Saw was back in action for less then 30 bucks shipping included... THANKS!!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information