This is an original Toro replacement part. It is supplied directly from original equipment manufacturer for use with snow blowers/throwers. Snowblower scrapers absorb a lot of friction while the machine is in operation, and they are designed to wear down over time. You can tell that a snowblower has a worn scraper because it will no longer clear the sidewalk as well as it did before wearing. Please note, paddles and scrapers are designed to wear at approximately the same rate, so it's always a good idea to replace them both at the same time. This vinyl blade-scraper is sold individually.
Replacing it is a quick and easy job. You will need a wrench to complete this repair.
• Remove the scraper bolts
• Pull the old scraper off of the snowblower
• Press the new scraper onto the lip of the impeller
• Return the scraper's bolts and nuts to their positions
Blade-Scraper 161-0963
OEM part for: Toro, Lawn Boy
Part Number: 161-0963
Product Description ?
- Classification: Part
- Weight: 0.64 lbs.
- Shipping: Ships Worldwide
Compatibility
This part will fit the following 70 machines
Toro
Lawn Boy
This item works with the following types of products:
- Snowblower Parts
This part replaces obsolete part #: 133-5585, 139-3536, 108-4884
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Blade-Scraper
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
The rotor and scraper were worn out.
Tool Type
Snowblower
Difficulty
Easy
Time
30-60 minutes
Tools Used
Pliers, Socket set, Wrench Set
Parts Used
Scraper blade was worn down
Tool Type
Snowblower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Pliers, Socket set
Parts Used
2. Removed bolts (2)
3. Bolted on new scraper
4. Reattached springs
The snow blower wasn't throwing the snow as far as it use to and it was not getting all the snow down to the driveway surface. Also the engine ran rough because the choke lever broke.
Tool Type
Snowblower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Socket set, Wrench Set
Replaced the auger blades and scraper blade on my Toro snowblower
Tool Type
Snowblower
Difficulty
Easy
Time
30-60 minutes
Tools Used
Pliers, Socket set, Wrench Set, Nutdriver
Parts Used
Blade scraper and rotor blade were wore out.
Tool Type
Snowblower
Difficulty
Expert
Time
1-2 hours
Tools Used
Pliers, Power Drill, Socket set, Wrench Set
Nothing
Tool Type
Snowblower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Pliers, Socket set, Adjustable Wrench
Parts Used
Removed the two bolts using socket wrench and open wrench. Removed spring using needle nose pliers.
Reversed process with replacement part.
Fairly easy.
Toro snowblower blade scraper and blades worn out.
Tool Type
Snowblower
Difficulty
Hard
Time
1-2 hours
Tools Used
Pliers, Power Drill, Socket set, Wrench Set, Utility knife
2. Removing the worn out rubber blades was difficult as a couple of the torx flat-headed bolts stripped out trying to break them loose. One bolt head had to be cut free from the blade with a razor knife to enable holding it with a vice grip pliers. I would recommend purchasing some new bolts and nuts when replacing these blades.
Normal wear and tear on the scaper and rotor.
Tool Type
Snowblower
Difficulty
Medium
Time
More than 2 hours
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, Torx screwdriver
Parts Used
All that being said, after using parts from your company several years now, I have complete confidence in their quality and that they are the exact replacement parts made by Toro. So if I encounter any problems in using them, most likely it is either my error or the lack of the correct tools, such as the proper Torx screwdriver.
Scraper blade worn out
Tool Type
Snowblower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set, Nutdriver
Parts Used
thrower blades were due to be replaced
Tool Type
Snowblower
Difficulty
Medium
Time
More than 2 hours
Tools Used
Pliers, Socket set, Wrench Set, Adjustable Wrench
Parts Used
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.