Easy
30-60 minutes
It is made out of a durable material and is sold individually. The blade spindle goes between the deck and the pulley. This is a genuine replacement part sourced from the original manufacturer for use with lawn tractors made by Yard Machines, Ryobi, MTD, Bolens, Yard Man, and Troy-Bilt. When replacing this item a socket set may be needed. Over time this part may break and will need to be replaced.
Blade Spindle Assembly 918-0142C
OEM part for: Yard Machines, Ryobi, MTD
Part Number: 918-0142C
$143.58
In Stock
Order within the next 6 hours and your part ships today! 
Jump To:
Frequently Purchased Together ?
Compatibility
This Blade Spindle Assembly will fit the following 940 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Displaying 20 of 940 matching models.
940 total model matches. Try the above search to narrow your results.
This is the official OEM part for the following brands:
- Bolens
- Husky
- MTD
- Ryobi
- Troy-Bilt
- Yard Machines
- Yard Man
This item works with the following types of products:
- Lawn Mower
- Lawn Tractor
This part replaces obsolete part #: 618-0142A ((Incl. Ref. 28, 35, 42)), 918-0142A, 618-0142, 918-0142, 618-0142A
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Blade Spindle Assembly
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Spinal teeth wore down to the point of not holding the blade
Josh - May 21, 2016
👍 5 of 6 people found this instruction helpful
Tool Type
Lawn Mower
Difficulty
Easy
Time
30-60 minutes
Tools Used
Socket set, Vice grips
Parts Used
I put blocks under the front of the tractor, block to back wheels so it would not move. lowered the deck as far as it would go. Removed the blade. Removed the four bolts holding the blade spindle from the deck.
Removed the worn blade spindle and placed the new one in its place. Used the self threading bolts to mount the new blade spindle. I would thread the bolts in a little and back them out , then kept doing this until the spindle and bolts were tight. Placed the belt back on the blade spindle. Then installed the blade.
Removed the worn blade spindle and placed the new one in its place. Used the self threading bolts to mount the new blade spindle. I would thread the bolts in a little and back them out , then kept doing this until the spindle and bolts were tight. Placed the belt back on the blade spindle. Then installed the blade.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Grinding noise, and deck vibration
Arden - August 17, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Lawn Tractor
Difficulty
Easy
Time
15-30 minutes
Tools Used
, hoist, impact wrench
Raised mower with hoist, loosened deck belt, removed blade, removed mounting bolts for spindle, mounted new spindle, adjust belt and deck level. Job done in twenty minutes. New spindle eliminated noisey bearings, and leveling deck eliminated deck vibration. Note: Before installing new spindle, mounting holes were "started" by using a 5/16 18tpi tap. Just enough to start the new mounting bolts. Quick, easy job, if you have, and use, the right tools.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Spindle bearings worn
Michael - July 3, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Lawn Tractor
Difficulty
Easy
Time
30-60 minutes
Tools Used
Socket set
Parts Used
Remove the deck from the mower
Remove the blade
Remove the four bolts holding the old blade spindle to the deck, and removed it
The new spindle assembly is not threaded, but the bolts are self tapping. Installed the new spindle.
Installed the blade
Replace the deck
Remove the blade
Remove the four bolts holding the old blade spindle to the deck, and removed it
The new spindle assembly is not threaded, but the bolts are self tapping. Installed the new spindle.
Installed the blade
Replace the deck
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Learn MoreOur product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
