This is a genuine Craftsman replacement part that has been sourced from the original manufacturer to be used with walk-behind lawnmowers. The metal blade attaches to the blade adapter and is used to cut grass. This item may require a wrench to install and it is recommended to wear gloves or use a wood block to lock the old blade to remove it. This blade is sold as an individual replacement part.
Blade, 22 532420463
OEM part for: Poulan, Husqvarna, Craftsman, Jonsered
Part Number: 532420463
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 98 machines
Craftsman
Poulan
Jonsered
Husqvarna
This item works with the following types of products:
- Lawn Mower Parts
This part replaces obsolete part #: 420463
Customer Part Reviews ?
- 1
- 2
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Blade, 22
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Mower blade needed preplacement
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set
Parts Used
I was unable to find the 22" blade with 5-point star center hole at any local stores. Went online and found your website. Easy to order and was delivered in just a few days.
Thanks!
Dull blade and worn wheels
Tool Type
Lawn Mower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set
Parts Used
I RECIEVED IT running rough would not stay running and the air filter was duct taped to stay on. and the oil was jet black and the blade was chewed up and the pulling belt was broken and the spark plu
Tool Type
Lawn Mower
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set
Star shape on adapter stripped off after SOMEBODY hit a immovable object.
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set, Leather gloves to hold blade & WD-40 & maybe a screwdriver
2. Tip mower onto side with gas cap down.
3. Remove blade bolt with 9/16 socket wrench and remove bolt and blade..
4.Tap adapter with rubber hammer until loose.
5. Slide adapter down engine shaft until you can remove self-propel belt off pulley on adapter. Might have to use screwdriver to get belt started off pulley then it's comes off easy once it's past the guides on the bottom of the mower.
6. Reverse procedure. Slide new adapter onto engine shaft. I put a little WD-40 on shaft first. It only goes on one way on the shaft.
7. Put drive belt back on making sure adapter is all the way up on engine shaft and drive belt is in pulley groove and under belt guides on mower.
8. Install blade onto star shape on adapter and hold in place as you install blade bolt with flat washer and lock washer. Tighten to spec with socket wrench.
9. Put some gas in the gas tank and send your girlfriend back out to mow! ;-)
blade worn
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set, wedge to hold blade while tightening
Parts Used
2. inspected blade
3. decided to replace
4. ordered blade
5. replaced blade
Needed new blade
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set
Parts Used
Replaced the blade and skirt
Tool Type
Lawn Mower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Socket set
Parts Used
For the skirt, I removed the screws holding the skirt in place, then removed the old skirt. I Next I placed the new skirt onto the backside of the mower and replaced the screws.
For the blade, I placed the mower (with assistance) onto blocks. My assistant made sure the mower was still at all times. Then I placed a block under the mower so the blade would not move. I removed the bolt and blade, cleaned area then replaced the new blade and prior bolt.
I made sure the underlining area was free of any grass clippings and cleaned. Finally, the
mower was safely placed on the ground, filled with gas and completed a test start of the
mower.
The blade was very dull and chipped by rocks
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set, Blade holder clamp.
Parts Used
Needed a new blade, drive cable, front wheel drive gears, drive belt needed replaced as well. Replaced the two front wheels. Tuned it up. Runs like new.
Tool Type
Lawn Mower
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Socket set, Wrench Set
Old blade needed a replacement.
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set
Parts Used
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.