866-322-9842
Mon-Fri 7am-1am EST
Sat-Sun 7am-11pm EST
Repair Parts Home  Appliance Parts  Oster Parts  148381-000-090 Black Container Bottom

Black Container Bottom

Part Number: 148381-000-090
Oster
Availability: 25+ in stock
Price: $3.99
Quantity:
Order within the next 11 hours
and your part ships today!

*This part replaces obsolete part #: 126450-001-090, 015132-020-090, 126450-000-090 and 015132-200-090.

Description:
This is an original Oster replacement part.
The purpose of this item is to hold the blade and seal in place at the bottom of the blender jar

Because it has plastic threads they will wear at times and the jar will leak.
Over tightening may crack this part, dropping it may break it and excessive heat may warp it.

Once you have this off, this is a good time to check the sealing ring to see if it is not cracked or if it has been compressed too much.

Product Information
Manufacturer: Oster
Product Number: 148381-000-090
Classification: Part
Weight: 0.03 lbs.
Shipping: Ships Worldwide
Repair Guides
Articles:
How to Replace the Container Bottom on an Oster Blender
Step-by-step instructions for removing and installing the container bottom on your Oster blender....
October 10, 2017
Related Products
Compatibility

This part is compatible with the following machines:

Oster

Products Compatibility

This item works with the following types of products:

  • • Blender
Questions & Answers

No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
19 of 22 people found this instruction helpful
Tool Type:
Blender
Parts Used:
Sealing Ring - 083422-070-000
Black Container Bottom - 148381-000-090
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, No tools needed.
Cracked bottom that screws onto glass container
Removed the cracked bottom from the jar, placed the blade in the container bottom, and the new seal on top of the blade. Then screwed the assembly to the bottom of the jar.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
9 of 10 people found this instruction helpful
Tool Type:
Blender
Parts Used:
Agitator Assembly - 031014-104-000
Sealing Ring - 083422-070-000
Black Container Bottom - 148381-000-090
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, A pipe wrench to remove the base that was stuck.
Existing agitator assembly leaked.
Disassembled Container bottom and replaced all parts. I noticed that the old agitator assembly appeared to have worn bearing seals and wobbled, probably causing the leaking. I was a little worried because the replacement part numbers were off by a digit or two, but the replacement parts were the same size and fit perfectly. I reassembled and the blender no longer leaked.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
5 of 6 people found this instruction helpful
Tool Type:
Blender
Parts Used:
Black Container Bottom - 148381-000-090
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Black bottom was broken
1. Took off the old bottom piece
2. Screwed on the new piece.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 3 people found this instruction helpful
Tool Type:
Blender
Parts Used:
Agitator Assembly - 031014-104-000
Sealing Ring - 083422-070-000
Black Container Bottom - 148381-000-090
Cover Square - 014357-050-090
Container-Gl-5C Sq - 025843-000-000
Cap-Filler,Oster Bld Lo - 024997-010-089
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Hands!
Agitator Assembly: Worn Sleeve Bearing & Dull Blades
Manually removed container bottom, gasket and agitator assembly, then assembled new container, container bottom, gasket & agitator assembly
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 3 people found this instruction helpful
Tool Type:
Blender
Parts Used:
Black Container Bottom - 148381-000-090
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Plastic Base of glass container fell on floor and broke.
Screwed the replacement base on the bottom of the container.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Blender
Parts Used:
Agitator Assembly - 031014-104-000
Black Container Bottom - 148381-000-090
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Blender leaking
Removed old assembly, screwed in new assembly
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Blender
Parts Used:
Black Container Bottom - 148381-000-090
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Old container bottom was cracked .
Ordered new part and replaced old part with new part.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Blender
Parts Used:
Black Container Bottom - 148381-000-090
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Black container bottom cracked.
No repair needed. Replacement part only.
Part was shipped promptly. Just screwed the new bottom on to the jar.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Blender
Parts Used:
Agitator Assembly - 031014-104-000
Black Container Bottom - 148381-000-090
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
The bottom container piece cracked
Just removed old base and blade and screwed on new pieces.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Blender
Parts Used:
Black Container Bottom - 148381-000-090
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Cracked/broken
Screwed new base on.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discussion
Discussion for Black Container Bottom - ( 148381-000-090 )
Discussion is closed. To ask our experts a question about a part, use the Q&A feature.
Question: Oster #6843

petradolha

Would this work on Oster model #6843?
WJA
Hello petradolha,

If you take a look at the parts list for the Oster 6843 Blender. Scroll down to the bottom of the parts list, and you will see the part number 148381-000-090 Container Bottom - Black. So to answer your question. Yes you can use this on your model 6843 Blender.

-WJA
Question: Container Bottom

1283485

Is this the container bottom that is being sold to fit the osterizer dual range blender made in 1976?
WJA
Hello 1283485,

There are a number of container bottoms that we provide. If you could come up with a model number. Hopefully we could locate one for you.

-WJA
Question: 6 Spokes?

petradolha

Hello,

before placing my order, I would like to make sure this part has 6 spokes, like the one in the picture.
Could you please confirm?

Thank you.
WJA
Hello petradolha,

I checked our stock of the 148381-000-090 Oster Black Container Bottom. To verify that it has 6 spokes as you asked. And it does.

-WJA
Question: Oster 4094 Classic Beehive Conta...

1169807

I purchased part no. 148381-000-090. It does not work on my blender. Do you have a part for this blender different from this part?
WJA
Hello 1169807,

For the Oster 4094, the 148381-000-090 Bottom Container is the only one that the manufacture shows available. You may want to contact our customer service center @ 866-802-6383 and explain your situation to them. I am sure they will be able to help you.

-WJA
Try this kit at the Oster site:

link removed Blender Accessory Refresh Kit - Black BLSTAK-B00-NP0 - Oster

I just ordered one. I'm pretty sure it will fit, as it's the only option that shows the 5-fin bottom like our Classic Beehive blender uses.

[QUOTE=mary10360;81033]I purchased part no. 148381-000-090. It does not work on my blender. Do you have a part for this blender different from this part?"
visa mastercard discover american express PayPal
HACKER SAFE certified sites prevent over 99.9% of hacker crime.

fancyboxy