Easy
Less than 15 minutes
This is a manufacturer sourced replacement belt used on Hitachi sanders. It is used to drive unit. This item is made out of rubber and it is sold individually. It is recommended to replace these belts every 6 months to ensure optimum performance.
You would need a screwdriver to complete a repair.
• Remove the belt cover
• Replace the old belt with the new one
• Secure the housing
Belt 958874
OEM part for: Metabo HPT (Hitachi)
Part Number: 958874
$12.19
In Stock
Order within the next 1 hour and your part ships today! 
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Compatibility
This part will fit the following 8 machines
Metabo HPT (Hitachi)
SB75 3" 2-speed Belt Sander View Diagrams & Manuals
SB10T 2-speed Belt Sander View Diagrams & Manuals
F-30A Electric Planer View Diagrams & Manuals
SB8T Belt Sander View Diagrams & Manuals
SB10V Sander / Polisher View Diagrams & Manuals
SB-75(B) Sander / Polisher View Diagrams & Manuals
SB75(B) Sander / Polisher View Diagrams & Manuals
SB8TA Planer View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Sander Parts
- Planer Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Prolonged the life of my favorite belt sanders!
Although the original drive belts on my Hitachi sanders are still fine even though they're both from the 1980's and were used commercially for years, I purchased these as spares "just in case". Because I haven't (or may never) used the belts, I can't honestly comment on their durability. I also bought new motor brushes as my 1980's era 3"x21" Hitachi belt sander had a broken brush spring and a lot of wear on both brush surfaces. Although eReplacement said the brushes for my slightly newer 3"x24" Hitachi were no longer available, I was able to determine that both sanders used the exact same brushes. These brushes also will work for my Hitachi compound miter saw. Very happy (so far) with the purchase.
Guest -
April 27, 2020
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Belt
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Drive wheel stopped spinning during heavy sanding due to belt slipping
frank - December 23, 2015
👍 1 of 1 people found this instruction helpful
Removed belt cover 3 screws, removed old belt and replaced with new one, by barely placing the belt on the pulleys and turning the pulleys and pressing the belt on. The machine runs like new. Its an older machine 4"x24" Hitachi belt sander, but it will out sand any thing in its class.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
WORN PLANER DRIVE BELT
Bruce - December 11, 2019
Tool Type
Planer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, BY HAND
Parts Used
This was an easy fix.
The previous Planer Drive Belt finally failed and I needed a new one.
I found this difficult to find part and ordered ten of them for future use.
Once arrived, I merely slipped the new one onto the planer pulleys and was back to work.
The previous Planer Drive Belt finally failed and I needed a new one.
I found this difficult to find part and ordered ten of them for future use.
Once arrived, I merely slipped the new one onto the planer pulleys and was back to work.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Drive belt broke
JACKIE - March 2, 2018
Tool Type
Sander
Difficulty
Medium
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Remove cover
Rolled new belt onto large and small pulleys
Replaced cover
Rolled new belt onto large and small pulleys
Replaced cover
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Belt on sander broke
Larry - February 7, 2018
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Removed the belt cover
Installed the new belt on the pulleys
Replaced the belt cover
Installed the new belt on the pulleys
Replaced the belt cover
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Hitachi 75 belt sander belt broke
GARRY - February 7, 2017
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
1. Removed belt shield
2. Replaced belt easy to put on pulleys
3. Replaced belt shield
2. Replaced belt easy to put on pulleys
3. Replaced belt shield
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Drive belt lost its tension and would do longer spin the samdpaper
Ken - February 1, 2017
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Removed the belt cover
Remove the old belt
Placed, the new belt on the edges of the pulleys, then pushed it on while turning it
Screwed on the belt cover
Remove the old belt
Placed, the new belt on the edges of the pulleys, then pushed it on while turning it
Screwed on the belt cover
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Old belt worn out and stretched so the sanding belt would not turn under pressure
Tom - September 15, 2016
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
1. Removed belt cover (one screw)
2. Removed old belt
3. Installed new belt by rolling the drive cylinder while pressing it into place (good tight fit)
4. Replaced the belt cover
2. Removed old belt
3. Installed new belt by rolling the drive cylinder while pressing it into place (good tight fit)
4. Replaced the belt cover
Did you find this story helpful?
Thanks for voting and helping fellow customers!
belt on sander
Charles - September 4, 2016
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
1. Removed screw that holds the belt cover on
2. Pulled belt into place
2. Pulled belt into place
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Changing the drive belt on a Hitachi belt sander
Johnny - May 8, 2016
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
1. Remove single phillips screw from belt cover. 2. Slip off old belt. 3. Slip new belt onto the drive pulleys. 4. Replace cover. Requires less than 5 minutes.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
