Medium
30-60 minutes
This is a genuine manufacturer approved replacement drive belt. It is specially produced for Hoover vacuums. It is installed on the shaft of the motor and on the end of the brush roller assembly allowing it to spin. Over time belts tend to stretch and wear our requiring replacement. It is recommended to replace these belts every 6 months to ensure optimum performance. Includes one (1) rubber material belt per order.
To complete this repair you should only need a screwdriver.
• Place handle in low position and turn cleaner over so bottom side is up
• Remove the 4 screws with a screwdriver
• Lift off bottom plate
• Remove agitator brush roll and the old belt
• With lettering on outside of belt slide new belt over motor pulley
• Insert agitator through belt and place belt in belt guide on an agitator
• Grasp agitator firmly and fit it into position
• Turn agitator making sure belt is not pinched between agitator and agitator shield
• Reassemble and test the unit
Belt - Flat H-38528033
OEM part for: Hoover, Royal
Part Number: H-38528033
Leaves our warehouse within 7 - 12 business days
Product Description ?
- Classification: Part
- Weight: 0.04 lbs.
- Shipping: Ships Worldwide
Compatibility
This part will fit the following 20 machines
Royal
Hoover
This item works with the following types of products:
- Vacuum Parts
This part replaces obsolete part #: RO-38528057, 38528057, 38528033
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Belt - Flat
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
The belt broke.
Tool Type
Vacuum
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver
Parts Used
Belt for my upright vacuum had broken
Tool Type
Vacuum
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
the parts that had to be put back in place as directed by the instructions I had.
Vacuum final filter needed changing, belt needed replacing.
Tool Type
Vacuum
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver
The brush caught the power cord and cause to expose bare wiring
Tool Type
Vacuum
Difficulty
Medium
Time
More than 2 hours
Tools Used
Screwdriver, Pliers
Broken belt
Tool Type
Vacuum
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
