Medium
30-60 minutes
This is an authentic OEM component from Makita. The plastic bellows is made for use with the LS1211 Miter Saw. This item is fitted between the rear bellows plate and the rear arm cover, protecting components of the saw. A screwdriver and a wrench set are needed for making the repair. The bellows is sold individually.
Bellows 415210-0
OEM part for: Makita
Part Number: 415210-0
$6.05
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This item works with the following types of products:
- Miter Saw Parts
- Saw Parts
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Bellows
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Miter table hard to turn
Fred - January 29, 2018
Tool Type
Miter Saw
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Provided onboard socket.
Took central nut off, miter guide, then lifted of table. Cleaned, and lubed with silicone spray. Replaced spring, reused old ball bearing. Reassembled, not over tightening nut. Much smoother now.
Also replaced switch to fix electronic brake issue. Fixed. Tip: Take a picture of the wires before disassembling.
Also changed bellows on back. Easy, except saw had been dropped and plate was bashed. Had to straighten. Little screws prone to stripping, but I made it work without stripping.
Also replaced switch to fix electronic brake issue. Fixed. Tip: Take a picture of the wires before disassembling.
Also changed bellows on back. Easy, except saw had been dropped and plate was bashed. Had to straighten. Little screws prone to stripping, but I made it work without stripping.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Miter saw was hard to adjust, and was missing bellows
Lowell - September 24, 2017
Tool Type
Miter Saw
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Wrench Set
To replace the slide plate. The 1/2" nut in the center of the turntable must come off. To access it take off the adjustable kerf- four screws. The whole top of the saw will lift off. The ball bearing, that is the positive stop index for the turntable will be loose so catch it. It is located at 0 degrees. Simple replace sliding plates, there are three. Put ball bearing in the post that has a cup to hold it with the spring underneath. Add a touch of lithium grease to ball bearing to keep it in place. Put top of saw on base and tighten nut so that saw will travel easily but is still secure. Work miter rotation through its whole travel to be sure. Lastly install kerf plates. This goes without saying make sure saw is unplug from outlet before attempting to make repairs.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Worn bellows and broken actuator on a drill
Dennis - January 31, 2017
Tool Type
Miter Saw
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver
Parts Used
Replaced with a screwdriver. Pretty simple!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
