Medium
30-60 minutes
Ball Crank JH-T12
OEM part for: Jet
Part Number: JH-T12
$28.99
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Compatibility
This part will fit the following 4 machines
Jet
JJ-6CSX (708457K) Woodworking Jointer View Diagrams & Manuals
JJ-6CSDX (708457DXK) Woodworking Jointer View Diagrams & Manuals
JJ-6HHDX (708466DXK) 6-inch Woodworking Jointer View Diagrams & Manuals
JJ-6CS (708456) Woodworking Jointer View Diagrams & Manuals
This item works with the following types of products:
- Jointer Parts
This part replaces obsolete part #: JH-T12W
Customer Part Reviews ?
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Ball Crank
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
A flange broke off the ball crank and the infeed table could not be adjusted.
Emory - March 2, 2017
👍 3 of 4 people found this instruction helpful
Tool Type
Jointer
Difficulty
Easy
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver
Parts Used
Disassembled the jointer from the base, turned it upside down and proceeded from there.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The ball crank and blade safety cover were broken
Troy - November 21, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Jointer
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Socket set, Wrench Set, Allen wrenches
Parts Used
Removed jointer from base,turned upside down
Removed ball crank bolt,and the pin that the ball crank fits on
Slide in feed table off base
Removed broken part,installed new part
Reverse steps
Removed ball crank bolt,and the pin that the ball crank fits on
Slide in feed table off base
Removed broken part,installed new part
Reverse steps
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Ball crank broke due to depth stop safety not being disengaged
Archie - March 7, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Jointer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Socket set
Parts Used
Repair was simple once joiner bed was removed from stand and inverted on workbench.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The jointer table adjuster broke
Donovan - November 25, 2019
Tool Type
Jointer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Socket set, Wrench Set
Parts Used
Removed jointer from stand, flipped over, removed the crank wheel and the crank screw. Remove the bolt holding ball crank. Install is reverse of disassembly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The old casting was broken so that infeed table could not be adjusted.
Jack - January 21, 2019
Tool Type
Jointer
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Socket set, Wrench Set, Adjustable Wrench, Requires a 1” socket.
Parts Used
Removed fence
Remove v belt
Loosen jointer from the stand
Remove the infeed crank
Remove broken part...1 bolt
Replace part and reassemble
Check height and squareness of the infeed and outfeed tables to TDC of blade.
Remove v belt
Loosen jointer from the stand
Remove the infeed crank
Remove broken part...1 bolt
Replace part and reassemble
Check height and squareness of the infeed and outfeed tables to TDC of blade.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Infeed bed would not adjust
Drew - July 22, 2018
Tool Type
Jointer
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Socket set, Wrench Set, Hammer; 1 1/16 socket
Parts Used
Refer to diagrams in Jet manual. Removed fence and cutter guard. Removed belt guard. Removed belt from motor. Unbolted jointer bed from base. Careful, it's heavy! Turned bed over on a work surface to access underneath. Removed crank wheel. Tap roll pin out of long adjustment screw using hammer. Removed long adjustment screw. Removed bolt holding ball crank. You need a 1 1/16" socket for this - not common in many socket sets. Removed and replaced ball crank. Reverse all steps to reassemble. Before reassembling it a good time to clean, oil, and wax surfaces. Repair would take less than an hour without cleaning.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Cast iron fork broke
Tom - December 29, 2016
Tool Type
Jointer
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Wrench Set, Adjustable Wrench
Parts Used
Removed the in feed table replaced the broken ball crank
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
