Product Information
Description:
This is an authentic Jet replacement part, sourced from the original manufacturer for use with woodworking lathes. Ball bearings are commonly used to reduce friction between a rotating shaft and fixed part assembly. This sealed bearing is available as an individual replacement part. |
Frequently Purchased With
Compatibility
This part is compatible with the following machines:
Products Compatibility
This item works with the following types of products:
- • Lathe
Questions & Answers for Ball Bearing
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Lathe
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Wrench Set, Allen wrench set
Lathe headstick beatings and pulley belt
1. Removed hand wheel
2. Loosened and removed bearing retainer.
3 . loosened belt.
4. Removed speed sensor
5. Drove shaft out.
6. Loosened inner bearing retainer
7. Removed pulley
8. Drove headstick bearing out and removed pulley shaft.
9. Replaced headstock bearing and restored all parts in reverse order of removal. Total time 45 minutes.
2. Loosened and removed bearing retainer.
3 . loosened belt.
4. Removed speed sensor
5. Drove shaft out.
6. Loosened inner bearing retainer
7. Removed pulley
8. Drove headstick bearing out and removed pulley shaft.
9. Replaced headstock bearing and restored all parts in reverse order of removal. Total time 45 minutes.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information