Medium
15-30 minutes
Genuine OEM sourced replacement part used on a variety of power tools. Ball bearings are used to reduce friction between rotating parts. Bearings experience constant wear when the tool is in operation, because of this they need to be periodically checked and replaced if needed. This part is made out of metal and it is sold individually.
Included in part number 381004-00 spindle assembly.
Ball Bearing 605040-15
OEM part for: DeWALT, Porter Cable
Part Number: 605040-15
$5.81
Factory Backorder
Date Available: Unknown 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This Ball Bearing will fit the following 739 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Displaying 20 of 739 matching models.
Porter Cable
Show More Compatible Models739 total model matches. Try the above search to narrow your results.
This is the official OEM part for the following brands:
- Black and Decker
- Craftsman
- Delta
- DeWALT
- Porter Cable
This item works with the following types of products:
- Band Saw
- Chop Saw
- Circular Saw
- Cordless Drill
- Drill
- Electric Drill
- Grinder
- Hammer Drill
- Impact Driver
- Impact Wrench
- Jig saw
- Jointer
- Laminate Trimmer
- Lawn Mower
- Nibbler
- Planer
- Plate Joiner
- Polisher
- Reciprocating Saw
- Rotary Hammer
- Sander
- Saw
- Screwdriver
- Shear
- Trim Saw
This part replaces obsolete part #: 330003-17, 883096, 1341072, 330003-17 (7311 Offset Base), 330003-08, 330003-08 (Npp)
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
0
4 stars
0
3 stars
1
2 stars
0
1 stars
0
< PREV
- 1
Dewalt DW402 bearing replacement
Received as ordered, would have liked to see OD and ID specs so I could tell I was ordering the correct part.
Guest -
October 15, 2019
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Ball Bearing
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Bearing loose
walter - March 5, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Sander
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, bearing puller,hammer
Take of sanding pad,top cover, remove brushes, split case in half, remove armature,remove bearings, and reverse process
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Bearing noise
Stephen - April 28, 2022
Tool Type
Grinder
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Bearing press
Disassemble, clean, inspect, remove, replace, lube and reassemble.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
the rear bearing had disintegrated.
Carl - October 9, 2019
Tool Type
Grinder
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Power Drill, grease for the gears, the bearings are sealed.
Parts Used
My tool is a DeWalt 4.5" angle grinder DW400 type2, It required seperating the two halves of the body, don't loose the 2 nuts that hold the shield in place they are a loose fit, being my first time in there I took pictures as i went so I could put things back where they belong, lots of wires crisscrossing which need to be put back in their original position so as not to rub against the armature. I used a special bearing seperator that I found at harbor freight, MADDOX BEARING SEPERATOR, because the space to seperate the bearing from the shaft is tight and all that was left of my bearing was the rase, this tool worked perfect. Take note of the bearing position on the shaft as it is critical for proper reinstallation. The electric bushings need to be moved out of the way to allow the bearing to fit in it's seat. Be sure the shaft that operates the on/off switch is installed allowing it to push the button on the switch.
Add the grease to the gears, not the armature.
Reassemble the two halves paying close attention to the wires.
A note for e-replacement: They have always been attentive to my needs, matching parts and the most extensive tool library anywhere to be found to make sure you get the right part everytime for tools and appliances, very knowledgeable and up to date on exactly what is required, incomparable.
Add the grease to the gears, not the armature.
Reassemble the two halves paying close attention to the wires.
A note for e-replacement: They have always been attentive to my needs, matching parts and the most extensive tool library anywhere to be found to make sure you get the right part everytime for tools and appliances, very knowledgeable and up to date on exactly what is required, incomparable.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
my offset router base needed new bearings
John - June 3, 2019
Tool Type
Router
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, snap ring pliers
Remove the C clip, pull out the shaft, tap out the top and bottom bearings, Install new bearings and reassemble the shaft and clip.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Learn MoreOur product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
