eReplacementParts.com
877-346-4814
Bosch Parts
Repair Parts Home  Power Tool Parts  Bosch Parts  1600900088 Ball Bearing

Ball Bearing 1600900088

OEM part for: Bosch

Part Number: 1600900088


Install
Videos!
Ball Bearing - 1600900088:Bosch 360 View
Ball Bearing - 1600900088:BoschBall Bearing - 1600900088:BoschBall Bearing - 1600900088:Bosch 360 View
In Stock
Ships within 1 business day
Medium 30-60 minutes (4 rated repairs)?
OEM: Original Equipment Manufacturer ?
Bosch
Does this d-block d-md-none fit my product?

Product Description ?

This deep-groove Ball Bearing is sealed on both sides. This is a genuine Bosch replacement part that is sold individually.

rnrn

  • Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to run smoothly.
    rn
  • Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement.

    • Classification: Part
    • Weight: 0.13 lbs.
    • Shipping: Ships Worldwide

    Frequently Purchased Together ?

    Compatibility

    This part will fit the following 41 machines

    Bosch

    1601A (0601601234) Router View Diagrams & Manuals
    1602A (0601602334) Router View Diagrams & Manuals
    1606A (0601606360) Router View Diagrams & Manuals
    1613 (0601613034) Plunge Router View Diagrams & Manuals
    1613AEVS (0601613639) Plunge Router View Diagrams & Manuals
    1613EVS (0601613734) Plunge Router View Diagrams & Manuals
    1617 (0601617161) Router View Diagrams & Manuals
    1617EVS (0601617739) Router View Diagrams & Manuals
    1617 (0601617039) Shop Router View Diagrams & Manuals
    1618 (0601618039) Shop Router View Diagrams & Manuals
    1604A (0601604262) Router Motor View Diagrams & Manuals
    1604A (0601604361) Shop Router View Diagrams & Manuals
    1606A (0601606334) Shop Router View Diagrams & Manuals
    1618EVS (0601618739) Shop Router View Diagrams & Manuals
    B1350 (0601604335) Router View Diagrams & Manuals
    B1450 (0601613735) Plunge Router View Diagrams & Manuals
    1602A (0601602234) Router View Diagrams & Manuals
    16171 (0601617139) 2HP Router Motor View Diagrams & Manuals
    16176 (0601617639) 2.25HP Router Motor View Diagrams & Manuals
    16181 (0601618139) 2HP Router Motor View Diagrams & Manuals
    16186 (0601618639) 2.25HP Router Motor View Diagrams & Manuals
    13020 (0601617570) Router View Diagrams & Manuals
    1601A (0601601334) Router View Diagrams & Manuals
    1604A (0601604234) Router View Diagrams & Manuals
    1604A (0601604261) Router View Diagrams & Manuals
    1604A (0601604263) Router View Diagrams & Manuals
    1604A (0601604334) Router View Diagrams & Manuals
    1604A (0601604360) Router View Diagrams & Manuals
    1606A (0601606234) Router View Diagrams & Manuals
    1613AEVS (0601613663) Router View Diagrams & Manuals
    MRF23EVS (3601F24010) 2.3 HP Fixed-Based Router View Diagrams & Manuals
    MRC23EVSK 2.3 Hp Vs Router Combo View Diagrams & Manuals
    MRP23EVS 2.3 Hp Vs Plunge-Base Router View Diagrams & Manuals
    130.26620 (0601617570) Router View Diagrams & Manuals
    MR 23 EVS (3601F24010) 2.3 HP Electronic Fixed-Base Router View Diagrams & Manuals
    1617 (06016170A0) Router View Diagrams & Manuals
    1617 (0601617139) Router View Diagrams & Manuals
    1617EVS (0601617639) Router View Diagrams & Manuals
    1617EVS (06016176A0) Router View Diagrams & Manuals
    1618EVS (0601618639) Router View Diagrams & Manuals
    1618EVS (06016186A0) Router View Diagrams & Manuals
    Show More Compatible Models
    Don't see yours? Try searching our site for :

    This item works with the following types of products:

    • Router Parts
    • Engine Parts

    This part replaces obsolete part #: 3600905512

    Customer Part Reviews ?

    4.2
    Average Rating (out of 5):
    6 Reviews
    Click to filter by ratings:
    5 stars
    4
    4 stars
    1
    3 stars
    0
    2 stars
    0
    1 stars
    1
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
  • Thirty five year old router
    Found the bearing I needed at your site arrived in a week, and is now as smooth and quite as when it was new
    Guest - December 3, 2021 Verified Purchase
    Fixed!
    The replacement bearing is identical to the OEM bearing. Total cost (part, tax, shipping) VERY reasonable.
    Guest - August 2, 2021 Verified Purchase
    Perfect replacement part.
    Came within a week, 4 days I think. A puller is a good idea for the top bearing.
    Guest - July 27, 2020 Verified Purchase
    parts worked fine
    this is an ongoing process for me. My Bosch router lower bearing wears out, and, rather than burning out the armature (which requires buying an new router for ~$150) I replace the bearing for $5.
    Guest - August 1, 2019 Verified Purchase
    was an exact fit
    Bearings were an exact fit and my router works like new again.
    Guest - March 31, 2021 Verified Purchase
    Shipping too long
    I ordered this part April 20 and didnt arrive until May 20 despite the 5-7 shipping time.
    Guest - May 29, 2019 Verified Purchase
    t
    t
    t - t days ago Verified Purchase
    eReplacementParts Team
    t

    Questions & Answers ?

    Our customer Service team is at the ready daily to answer your part and product questions.

    photo of team member
    Ask our Team

    We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    Does this fit my product?

    Questions & Answers for Ball Bearing


    No questions have been asked yet

    Customer Repair Instructions ?

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

    Medium 30-60 minutes (4 rated repairs)?

    Lower Bearing failure On Bosh Router

    Kirk - December 16, 2017
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Router

    Difficulty

    Easy

    Time

    15-30 minutes

    Tools Used

    Screwdriver, Gear puller, hex key

    Replaced both upper and lower bearings. Remove top cap (2 screws) with 2.5mm hex key. Pull speed adjust by pulling back out of retainer. Remove brushes, I used a bent paper clip to pull the spring retainers back. Next remove 2 PH screws holding the top assembly to the windings. Pull off the top assembly. Remove the bottom bearing retaining screws(2). Remove the shaft nut on the armature. At this point the armature can be pulled from the housing. Simply remove/replace the bearings. Reverse to re-assemble. You really don't need pullers but small bearing pullers are cheap. If you replace bearings on any power tool its worth the $12. for a puller.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Bearing was noisy and brushes were worn.

    Paul - December 8, 2017
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Router

    Difficulty

    Medium

    Time

    1-2 hours

    Tools Used

    Screwdriver, Socket set, Wrench Set

    1 Dis-assemble and remove armature from motor housing.
    2 Remove old bearing with a socket used as a punch to drive bearing out.
    3 Clean area were bearing goes with clean cloth dampened with mineral spirits.
    4 Put new bearing in freezer for one hour.
    5 With ten minutes remaining put motor housing in preheated oven of 200 F.
    6 After one hour remove bearing from freezer and motor housing from oven.
    7 Drop bearing into opening.
    8 Let housing cool and then re-assemble.
    9 Note: cold causes the bearing to contract by .001 inches and the heat causes the housing to expand by .001 inches and the bearing drops into the bore.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Extreme vibration due to lower bearing failure.

    William - May 1, 2016
    👍 1 of 1 people found this instruction helpful
    Tool Type

    Router

    Difficulty

    Easy

    Time

    1-2 hours

    Tools Used

    Screwdriver, Pliers, Socket set

    Removed Top Bearing cover and pulled brush springs and brushes from commutator. Disassembled lower lock nut after removing lower slide and height adjustment assembly. Care should be taken when removing lower plate as plunge spring has a tiny ball at the top and is easily lost. Remove lower bearing cover after removing bearing lock nut. Taking care of the small parts and brushes. Removed armature from housing. Removed bearings and replaced same. Polished the commutator in a lathe while the armature was out of the housing. Reassembled the same. Router runs great again for a 15 year old.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    Router shaft wobble and vibration

    Phillip - October 13, 2021
    Tool Type

    Router

    Difficulty

    Medium

    Time

    30-60 minutes

    Tools Used

    Screwdriver, Pliers

    Removed top cover (4 screws).
    Removed brushes (2 screws on each brush holder).
    Removed plunge base.
    Removed nut on lower shaft (recessed in bottom of housing).
    Removed upper and lower bearings.
    Replaced bearings and re-assembled.
    Did you find this story helpful?
    Thanks for voting and helping fellow customers!

    OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

    Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

    Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

    All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

    Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

    All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

    This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal