Ball Bearing BB-608ZZ
Part Number: BB-608ZZ
Leaves our warehouse within
7 - 12 business days
7 - 12 business days
*This part replaces obsolete part #: 6284733 and 5632831.
Product Information
Description:
This is an OEM Authorized replacement part used on variety of power tools. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to run smoothly. Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement. |
Frequently Purchased With
Compatibility
the 71 compatible machines
This part is compatible with the following machines:
Powermatic
15S (1791210) 15" Spiral Cutterhead Planer
15HH (1791213) 15" Helical Cutterhead Planer
HPS67 1791287 5 HP 3Ph 230V Horizontal Panel Saw
HPS67-1 1791286 3HP 1Ph 230V Horizontal Panel Saw
HPS126 7.5 HP 3Ph 230V Horizontal Panel Saw
15HH (1791213) 15" Helical Cutterhead Planer
HPS67 1791287 5 HP 3Ph 230V Horizontal Panel Saw
HPS67-1 1791286 3HP 1Ph 230V Horizontal Panel Saw
HPS126 7.5 HP 3Ph 230V Horizontal Panel Saw
PWBS-14 (1791216K) 1.5HP 1Ph 115/230V Bandsaw
PWBS-14 (1791216K) 1.5HP 1Ph 115/230V Bandsaw
PM1500 (1791500) 15-inch Woodworking Band Saw
PM1500 (1791500) 15-inch Woodworking Band Saw
PWBS-14 (1791216K) 1.5HP 1Ph 115/230V Bandsaw
PM1500 (1791500) 15-inch Woodworking Band Saw
PM1500 (1791500) 15-inch Woodworking Band Saw
Jet
J-3410 (414454) 7x12 Cut-off Bandsaw
J-3410 (414454) 7x12 Cut-off Bandsaw
J-3410-2 (414455) 7x12 Cut-off Bandsaw
J-3410-2 (414455) 7x12 Cut-off Bandsaw
HBS-814GH (414466) Geared Head Horizontal Bandsaw
HBS-814GH (414466) Geared Head Horizontal Bandsaw
J-7015 (414450) 8-in x 13-in Horizontal Cut-Off Bandsaw
J-7015 (414450) 8-in x 13-in Horizontal Cut-Off Bandsaw
J-7020 (414472) 10"x16" Horizontal Bandsaw
J-7020 (414472) 10"x16" Horizontal Bandsaw
J-7020M (414474) 10"x16" Miter Cut-Off Bandsaw
J-7020M (414474) 10"x16" Miter Cut-Off Bandsaw
J-7020M (414474) 10"x16" Miter Cut-Off Bandsaw
J-7040 (414478) 10"x16" Horizontal Bandsaw
J-7040 (414478) 10"x16" Horizontal Bandsaw
J-9180 (414464) 7 in. Zip-Miter Bandsaw
J-9180 (414464) 7 in. Zip-Miter Bandsaw
J-9180 (414464) 7 in. Zip-Miter Bandsaw
J-9225 (414467) 8-3/4 in. Zip-Miter Bandsaw
J-9225 (414467) 8-3/4 in. Zip-Miter Bandsaw
J-9225 (414467) 8-3/4 in. Zip-Miter Bandsaw
JWP-16OS (708531) Woodworking Planer
JSM-30 Air Ratchet Wrench
JSM-709R Reversible Angle Drill
JWBS-12OS (708901B) 1/2 HP, 1Ph 115V Bandsaw
JWBS-12OS (708901B) 1/2 HP, 1Ph 115V Bandsaw
JWBS-14DXPRO Delux Pro Band Saw
J-3410 (414454) 7x12 Cut-off Bandsaw
J-3410-2 (414455) 7x12 Cut-off Bandsaw
J-3410-2 (414455) 7x12 Cut-off Bandsaw
HBS-814GH (414466) Geared Head Horizontal Bandsaw
HBS-814GH (414466) Geared Head Horizontal Bandsaw
J-7015 (414450) 8-in x 13-in Horizontal Cut-Off Bandsaw
J-7015 (414450) 8-in x 13-in Horizontal Cut-Off Bandsaw
J-7020 (414472) 10"x16" Horizontal Bandsaw
J-7020 (414472) 10"x16" Horizontal Bandsaw
J-7020M (414474) 10"x16" Miter Cut-Off Bandsaw
J-7020M (414474) 10"x16" Miter Cut-Off Bandsaw
J-7020M (414474) 10"x16" Miter Cut-Off Bandsaw
J-7040 (414478) 10"x16" Horizontal Bandsaw
J-7040 (414478) 10"x16" Horizontal Bandsaw
J-9180 (414464) 7 in. Zip-Miter Bandsaw
J-9180 (414464) 7 in. Zip-Miter Bandsaw
J-9180 (414464) 7 in. Zip-Miter Bandsaw
J-9225 (414467) 8-3/4 in. Zip-Miter Bandsaw
J-9225 (414467) 8-3/4 in. Zip-Miter Bandsaw
J-9225 (414467) 8-3/4 in. Zip-Miter Bandsaw
JWP-16OS (708531) Woodworking Planer
JSM-30 Air Ratchet Wrench
JSM-709R Reversible Angle Drill
JWBS-12OS (708901B) 1/2 HP, 1Ph 115V Bandsaw
JWBS-12OS (708901B) 1/2 HP, 1Ph 115V Bandsaw
JWBS-14DXPRO Delux Pro Band Saw
JWBS-14DXPRO Delux Pro Band Saw
HVBS-7MW (414459) Band Saw
HVBS-7MW (414459) Band Saw
JSM-31 1/2" Air Ratchet Wrench
JSM-619 Air Angle Grinder
JSM-6195B Air Angle Grinder
JSM-804 1/4-inch Air Screwdriver
JTS-10DD Table Saw
JTS-10DD Table Saw
JSL-12BS 12-Inch Bandsaw
JSL-12BS 12-Inch Bandsaw
JPL-358 Pen Lathe
JSM-532 1/4" Die Grinder
JSM-5252 90 Degree Right Angle Die Grinder
JSM-522 1/4" Die Grinder
JSM-501 1/4" Die Grinder
AG-4.5S 4-1/2" Governed Disc Grinder
AG-4S 4" Angle Grinder
JSM-5430 Die Grinder
JSM-3430 1/2" Air Ratchet Wrench
JSM-3330 3/8" Air Ratchet Wrench
JSG-0470 7" Angle Sander
JSG-0472 7" Angle Polisher
JSM-8472 1/4" Air Screwdriver - Positive Clutch
JS30 M-Jsm-30 Air Ratchet Wrench Parts
JS31 M-Jsm-31 Air Ratchet Wrench Parts
JS532 M-Jsm-532 Air Die Grinder Parts
HVBS-7MW (414459) Band Saw
HVBS-7MW (414459) Band Saw
JSM-31 1/2" Air Ratchet Wrench
JSM-619 Air Angle Grinder
JSM-6195B Air Angle Grinder
JSM-804 1/4-inch Air Screwdriver
JTS-10DD Table Saw
JTS-10DD Table Saw
JSL-12BS 12-Inch Bandsaw
JSL-12BS 12-Inch Bandsaw
JPL-358 Pen Lathe
JSM-532 1/4" Die Grinder
JSM-5252 90 Degree Right Angle Die Grinder
JSM-522 1/4" Die Grinder
JSM-501 1/4" Die Grinder
AG-4.5S 4-1/2" Governed Disc Grinder
AG-4S 4" Angle Grinder
JSM-5430 Die Grinder
JSM-3430 1/2" Air Ratchet Wrench
JSM-3330 3/8" Air Ratchet Wrench
JSG-0470 7" Angle Sander
JSG-0472 7" Angle Polisher
JSM-8472 1/4" Air Screwdriver - Positive Clutch
JS30 M-Jsm-30 Air Ratchet Wrench Parts
JS31 M-Jsm-31 Air Ratchet Wrench Parts
JS532 M-Jsm-532 Air Die Grinder Parts
Wilton
Products Compatibility
Questions & Answers for Ball Bearing
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
3 of 3 people found this instruction helpful
Tool Type:
Band Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, Vice, vice grips, solderring iron.
The lower blade guide bearings siezed up on my Jet JWBS-14SAF-3 band saw
I had to remove a knurled knob to get the old bearings off. . The parts department at Jet told me the knob was pressed on, it wasn't. The technical support department told me it was threaded on, and that it had thread lock on the threads. I drilled a hole in a block of wood about the same size diameter of the shaft I had to hold. Then I cut the block in half (along the length of the hole) so that I could wrap sandpaper around the shaft and put it in the block and then in the bench vice. That gave me a good grip on the shaft so it wouldn't spin. Then I used vice grip pliers to remove the knurled knob. Once the knob was off I pried the old bearings off using a screwdriver and pliers. I heated the new bearings just a little so that they slid on the shaft easily. To heat the bearings I just slid them (one at a time) over my soldering iron shaft for a few seconds. Then I re-assembled everything.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Band Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Socket set, Wrench Set
Older Metal Band saw had some wore out parts, New replacement saw was $1600. Fix the old one for a couple hundred.
Disassembled, then reassembled.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Planer
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Power Drill, Socket set, Bearing puller
Bearings needed replacement
Followed rigid parts diagram found online, rigid manual and common sense. I needed to buy a bearing puller to do it right but wasn’t very expensive
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Band Saw
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set, Wrench Set
rollerbearing was seized
Removed panhead screw and roller bearing and re-installed the new ones...got the parts from E-Replacement parts in a very short time from ordering and got back up and running in a very short time...VERY PLEASED...!!!!!!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Band Saw
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Socket set, Wrench Set
Bracket holding the lower guide bearing came loose
Remove table,removed blade, removed tires, replaced bearings and added bushing and larger washers to hold lower bracket in place. install new tires top & down, installed new blade, realigned bearing guides, blade on the tires, reinstall table, back to work
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Band Saw
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, No tools requird
Lost blade guide thumb screw.
Replaced missing Thumb Screw. Kept the ball bearing for spare part.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Band Saw
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Allen Wrench
Required new parts
I removed the old guide blocks from the brackets. And put a dollar bill between them and the blade for the correct placement. I then remove the old bearings and placed the new ones in and adjusted them so the blade was just almost touching them.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
6 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
6
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Jet band saw replacement part.
The Jet Band Saw parts fit perfectly and were delivered quickly. I will use this company again
Guest -
September 12, 2023
Verified Purchase
Correct part
This bearing was the correct part and worked as planned it looks and feels just like the factory ones
Jason -
December 13, 2022
Verified Purchase
Great part easy replacement.
Came early east to replace.
Guest -
May 13, 2022
Verified Purchase
Part ordered was the part received. Prompt delivery by USPS.
Part ordered was the part received in a prompt manner.
Guest -
May 22, 2021
Verified Purchase
Excellent service!
Correct part, fast delivery, and my bandsaw is up and running smoothly!
Guest -
May 18, 2021
Verified Purchase
roller bearing guides
bearings were for the blade guide on my 12" jet band saw. was quick...quicker and easier then I planned. it was the 1st time since I bought the saw that I replaced the bearings. should have done this much sooner as the saw now runs much smoother and much more quieter.
Guest -
August 12, 2020
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
Product Information