*This part replaces obsolete part #: 6295249.
Product Information
Description:
This is an original replacement part manufactured for use with power tools. The ball bearing is used with a variety of different types of equipment and is commonly used to reduce friction between a rotating shaft and a fixed housing. This ball bearing is available as an individual replacement part, please see model diagram for part location and usage. |
Frequently Purchased With
Compatibility
the 34 compatible machines
This part is compatible with the following machines:
Powermatic
209-1 (1791296) 5HP-1Ph 230V Planer
209HH-3 (1791316) 5HP-3Ph 230V/460V Planer
209-3 (1791297) 5HP-3Ph 230V/460V Planer
209HH-1 (1791315) 5HP-1Ph 230V Planer
2013 (1791257) 2HP 1Ph 230V Bandsaw
2013 (1791257) 2HP 1Ph 230V Bandsaw
2013 (1791258) 3HP 3Ph 230/460V Bandsaw
2013 (1791258) 3HP 3Ph 230/460V Bandsaw
209HH-3 (1791316) 5HP-3Ph 230V/460V Planer
209-3 (1791297) 5HP-3Ph 230V/460V Planer
209HH-1 (1791315) 5HP-1Ph 230V Planer
2013 (1791257) 2HP 1Ph 230V Bandsaw
2013 (1791257) 2HP 1Ph 230V Bandsaw
2013 (1791258) 3HP 3Ph 230/460V Bandsaw
2013 (1791258) 3HP 3Ph 230/460V Bandsaw
2415 (1791259) 3HP 1Ph 230V Bandsaw
2415 (1791259) 3HP 1Ph 230V Bandsaw
2415 (1791260) 5HP 3Ph 230/460V Bandsaw
2415 (1791260) 5HP 3Ph 230/460V Bandsaw
1285 12 inch Jointer
1285 (1791307) 12-inch Jointer
1285 (1791308) 12-inch Jointer
PJ1696 (1791283) 16-inch Jointer
2415 (1791259) 3HP 1Ph 230V Bandsaw
2415 (1791260) 5HP 3Ph 230/460V Bandsaw
2415 (1791260) 5HP 3Ph 230/460V Bandsaw
1285 12 inch Jointer
1285 (1791307) 12-inch Jointer
1285 (1791308) 12-inch Jointer
PJ1696 (1791283) 16-inch Jointer
Jet
JDP-20MF (354170) Drill Press
JDP-20MF (354170) Drill Press
JBG-6A (577101) 6" Shop Bench Grinder
JBG-10A (577103) Bench Grinder
JSB-10L (708110) 1725 RPM Buffing Machine
JSB-10L (577110K) 1725 RPM Buffing Machine
JSB-10H (577112K) 3450 RPM Buffing Machine
JTM-4VS Turret Mill
JTM-4VS Turret Mill
JDP-20MF (354170) Drill Press
JBG-6A (577101) 6" Shop Bench Grinder
JBG-10A (577103) Bench Grinder
JSB-10L (708110) 1725 RPM Buffing Machine
JSB-10L (577110K) 1725 RPM Buffing Machine
JSB-10H (577112K) 3450 RPM Buffing Machine
JTM-4VS Turret Mill
JTM-4VS Turret Mill
JWP-208-1 (708528) 3HP - 1Ph 230V Planer
JWP-208-3 (708584) 5HP - 3Ph 230/460V Planer
JHS-2200 (140521) Hydraulic Stackers
JOVS-10 (708411) Oscillating Spindle Sander
JWBS-20QT-3 (710754B) 18-inch Band Saw
JWBS-20QT-3 (710754B) 18-inch Band Saw
JWBS-20QT-5 (710755B) 18-inch Band Saw
JWBS-20QT-5 (710755B) 18-inch Band Saw
3-PT-(252030) 3-Ton Heavy Duty Manual Trolley
JWP-208-3 (708584) 5HP - 3Ph 230/460V Planer
JHS-2200 (140521) Hydraulic Stackers
JOVS-10 (708411) Oscillating Spindle Sander
JWBS-20QT-3 (710754B) 18-inch Band Saw
JWBS-20QT-3 (710754B) 18-inch Band Saw
JWBS-20QT-5 (710755B) 18-inch Band Saw
JWBS-20QT-5 (710755B) 18-inch Band Saw
3-PT-(252030) 3-Ton Heavy Duty Manual Trolley
Products Compatibility
Questions & Answers for Ball Bearing
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Bench Grinder
Repair Difficulty:
Hard
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Wrench Set, Nutdriver
Bearing and start switch
First make a mark on the motor and the motor cover so you can line up the screw holes when you put the motor cover back on. Remove the four screws then use a mallet to hit the motor cover off. Pull the bearing out of housing, then install the new bearing. Next make a mark on the shaft where the start switch is located. Note how the start switch is assembled. Remove the old switch and install the new one. Use a rubber hammer to put motor cover back on, put the four screws back in.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information