eReplacementParts.com
866-322-9842
Ryobi Parts
Repair Parts Home  Power Tool Parts  Ryobi Parts  680141022 Ball Bearing

Ball Bearing

Part Number: 680141022
RyobiRidgid
Availability: 25+ in stock
Price: $1.99
Quantity:
Order within the next 9 hours
and your part ships today!

*This part replaces obsolete part #: 671419002, HPL50K-37, 680141020, 6814101, 990924001, 050007000, 039143005024, 680141007, 681056001, 680141014, 681141002, 039028001026, 6814104, 6710903, 680141018, 680141001 and 968305-010.

Product Information
Manufacturer: Ryobi, Ridgid, Ryobi -TTI
Product Number: 680141022
Classification: Part
Weight: 0.01 lbs.
Shipping: Ships Worldwide
Specifications
  • 608Z
Description:
Genuine Manufacturer Approved replacement part used on a variety of Power Tools. This Ball Bearing has multiple applications depending on your tool. This part is made out of Metal and it is Sold Individually. Ball Bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to run smoothly. Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement.

To replace this Bearing you would need a Screwdriver and a Set of Wrenches.
Compatibility

This part is compatible with the following machines:

Ryobi
Ridgid
Ryobi -TTI

Products Compatibility

This item works with the following types of products:

  • • Circular Saw
  • • Cultivator
  • • Drill
  • • Electric Drill
  • • Grinder
  • • Hammer Drill
  • • Impact Wrench
  • • Jig saw
  • • Laminate Trimmer
  • • Miter Saw
  • • Mixer
  • • Planer
  • • Polisher
  • • Reciprocating Saw
  • • Router
  • • Sander
  • • Saw
  • • Screwdriver
  • • Table Saw
  • • Tile Saw
Expand List
Questions & Answers

I need a bearing
Rodolfo
Hello Rodolfo, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
Repair Instructions: Submitted by Customers Like You
0 of 1 people found this instruction helpful
Tool Type:
Cultivator
Parts Used:
Ball Bearing - 680141022
Repair Difficulty:
Hard
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Socket set, Wrench Set, snap ring pliers, metric sockets, heat gun
Noisey power head bearings
This is an older model Ryobi string trimmer,although not specifically in the "Tool type" category, They are the correct bearings, Confirm using the numbers found on the bearing seals. Remove the string head by inserting a flat screwdriver into the provided place on the front of casting for the guard assembly, rotate the string holder until it locks in place in the slot.Grip and turn entire string holder counter clockwise to loosen and remove.Loosen bolt on power head clamp and remove locating bolt, these are metric bolts, be careful not to lose the locating bolt as it is a specific length. Entire power head assy should now slide freely off the goose-neck. Do not allow drive shaft to fall on the ground, or it should be clean and oiled before re assembly. Remove the lower drive nut by using a deep well socket on the upper drive hex in the power head. lock the drive nut as before and turn the socket counter clockwise. Using snap ring pliers, remove the lower snap ring (under the drive nut) retaining the drive/ bearing assembly, then tap on the socket to drive out the bearing assembly in that direction. It is a tight fit and can be made easier by warming the casting using a heat gun on the casting. Remove both old bearings, note the seals, be sure they face out wards top and bottom. Completely pack new bearings with a high quality, non fibrous grease before re-assembly. Clean all parts before re-assembly, ad re-assemble in reverse order. NOTE ON BEARING INSTALLATION, do not push or hammer on outer race or rubber seal as this will destroy the new bearings! Push on inner race only, When installing ASSEMBLY back into power head CASTING, push ONLY on OUTER race, again warming casting if necessary to ease assembly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
5
Average Rating (out of 5):
1 Reviews
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
  • Highest Rating
  • Most Recent
< PREV
  • 1
NEXT >
  • Mixer repair
    Perfect fit ,and arrived fast
    Guest - September 8, 2019 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    NEXT >
    Product Information
    Manufacturer: Ryobi, Ridgid, Ryobi -TTI
    Product Number: 680141022
    Classification: Part
    Weight: 0.01 lbs.
    Shipping: Ships Worldwide
    eReplacementParts.com
    7036 South High Tech Dr.
    Midvale, UT 84047
    visa mastercard discover american express PayPal

    fancyboxy