Install
Videos!
Watch The
Repair Video
Repair Video
Ball Bearing 02-04-0710
Part Number: 02-04-0710
Leaves our warehouse within
7 - 12 business days
7 - 12 business days
*This part replaces obsolete part #: 02-04-0760.
Product Information
Compatibility
the 34 compatible machines
This part is compatible with the following machines:
Milwaukee
6815 (SER 710B) Shear
6753-1 (SER 704-1001) Drywall Screwdriver
6805 (SER 709C) Shear
0228-1 (SER 689-1001) Electric Drill / Driver
0228-1 (SER 689-1001) Electric Drill / Driver
0229-3 (SER 724-1001) Electric Drill / Driver
0229-3 (SER 724-1001) Electric Drill / Driver
6016 (SER 757-1001) Sander
6016 (SER 757-257800) Sander
6017 (SER 781-1001) Sander
6017 (SER 781-64400) Sander
6018 (SER 876A) Sander
6019 (SER 877A) Sander
5392-1 (SER 665-1001) Hammer Drill
5392-1 (SER 665-1001) Hammer Drill
6815 (SER 710-5851) Shear
6805 (SER 709-6700) Shear
6753-1 (SER 704-1001) Drywall Screwdriver
6805 (SER 709C) Shear
0228-1 (SER 689-1001) Electric Drill / Driver
0228-1 (SER 689-1001) Electric Drill / Driver
0229-3 (SER 724-1001) Electric Drill / Driver
0229-3 (SER 724-1001) Electric Drill / Driver
6016 (SER 757-1001) Sander
6016 (SER 757-257800) Sander
6017 (SER 781-1001) Sander
6017 (SER 781-64400) Sander
6018 (SER 876A) Sander
6019 (SER 877A) Sander
5392-1 (SER 665-1001) Hammer Drill
5392-1 (SER 665-1001) Hammer Drill
6815 (SER 710-5851) Shear
6805 (SER 709-6700) Shear
6815-2 (SER 710-1001) Shear
6855 (SER 711A) Shear
6815-2 (SER 710C) Shear
6800 (SER 220-1001) Shear
0566-1 (SER 496-41000) Drain Cleaner
0566-1 (SER 496-41500) Drain Cleaner
6805 (SER 709-1001) 16 Gauge Shear
6805 (SER 709-7151) 16 Gauge Shear
6805 (SER 709A) 16 Gauge Shear
6805 (SER 709B) 16 Gauge Shear
6815 (SER 710-1001) 14 Gauge Shear
6815 (SER 710-5450) 14 Gauge Shear
6815 (SER 710A) 14 Gauge Shear
6815 (SER 710C) 14 Gauge Shear
6753-1 (SER 704-28367) D.I. Drywall Screw Driver
6750-1 (SER 464-110000) Drywall Screwdriver
6805 (SER 709D) 16 Gauge Shear
6855 (SER 711A) Shear
6815-2 (SER 710C) Shear
6800 (SER 220-1001) Shear
0566-1 (SER 496-41000) Drain Cleaner
0566-1 (SER 496-41500) Drain Cleaner
6805 (SER 709-1001) 16 Gauge Shear
6805 (SER 709-7151) 16 Gauge Shear
6805 (SER 709A) 16 Gauge Shear
6805 (SER 709B) 16 Gauge Shear
6815 (SER 710-1001) 14 Gauge Shear
6815 (SER 710-5450) 14 Gauge Shear
6815 (SER 710A) 14 Gauge Shear
6815 (SER 710C) 14 Gauge Shear
6753-1 (SER 704-28367) D.I. Drywall Screw Driver
6750-1 (SER 464-110000) Drywall Screwdriver
6805 (SER 709D) 16 Gauge Shear
Products Compatibility
List
This item works with the following types of products:
- • Drain Cleaner
- • Drill
- • Electric Drill
- • Hammer Drill
- • Sander
- • Screwdriver
- • Shear
Questions & Answers for Ball Bearing
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Sander
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Small hammer & a vise
Bearings were worn out causing the sander to run slowly rough.
1. Remove the sanding pad and lower bearing assembly.
2. Separate and remove the plastic housing.
3. Slide the armature out of the field coil.
4. Remove and replace the bearings on each end of the armature.
5. Remove the old brushes and insert the new ones.
6. Reinsert the armature into the field coil being careful not to break the new brushes.
7. Replace old bearing mounted in the sander pad base.
8. Reassemble the housing and sander pad assembly.
2. Separate and remove the plastic housing.
3. Slide the armature out of the field coil.
4. Remove and replace the bearings on each end of the armature.
5. Remove the old brushes and insert the new ones.
6. Reinsert the armature into the field coil being careful not to break the new brushes.
7. Replace old bearing mounted in the sander pad base.
8. Reassemble the housing and sander pad assembly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information
