Backpack Blower Strap C061000100
Part Number: C061000100
Order within the next 10 hours
and your part ships today!
and your part ships today!
*This part replaces obsolete part #: P021001770, 30030008260, P021001760 and 30030008261.
Product Information
Description:
Genuine Echo replacement part, this item is sold individually. Two of the Backpack Harnesses are needed for the Back Pack Blowers shown below. It does include the mounting hardware to attach it to the Blower. The Backpack harness is padded for comfort when using the Blower. |
Frequently Purchased With
Compatibility
the 52 compatible machines
This part is compatible with the following machines:
Echo
PB-260L (03001001-03999999) Backpack Blower
PB-260L (04001001-04999999) Backpack Blower
PB-260L (05001001-05999999) Backpack Blower
PB-260L (06001001-06999999) Backpack Blower
PB-260L (07001001-07999999) Backpack Blower
PB-260L (P05913001001-P05913999999) Backpack Blower
PB-260L (P28512001001-P28512999999) Backpack Blower
PB-261L (02001001-02999999) Backpack Blower
PB-261L (06001001-06999999) Backpack Blower
PB-261L (P07411001001-P07411999999) Backpack Blower
PB-403 (03001001-03999999) Backpack Blower
PB-403 (04001001-04999999) Backpack Blower
PB-403H (02001001-02999999) Backpack Blower
PB-403H (03001001-03999999) Backpack Blower
PB-403H (04001001-04999999) Backpack Blower
PB-403T (02001001-02999999) Backpack Blower
PB-403T (03001001-03999999) Backpack Blower
PB-403T (04001001-04999999) Backpack Blower
PB-413 (02001001-02999999) Backpack Blower
PB-413H (02001001-02999999) Backpack Blower
PB-4600 (059919-999999) Backpack Blower
PB-4600 (Type 1E) Backpack Blower
PB-460LN (03001001-03999999) Backpack Blower
PB-460LN (04001001-04999999) Backpack Blower
PB-461LN (02001001-02999999) Backpack Blower
PB-46HT Backpack Blower
PB-260L (04001001-04999999) Backpack Blower
PB-260L (05001001-05999999) Backpack Blower
PB-260L (06001001-06999999) Backpack Blower
PB-260L (07001001-07999999) Backpack Blower
PB-260L (P05913001001-P05913999999) Backpack Blower
PB-260L (P28512001001-P28512999999) Backpack Blower
PB-261L (02001001-02999999) Backpack Blower
PB-261L (06001001-06999999) Backpack Blower
PB-261L (P07411001001-P07411999999) Backpack Blower
PB-403 (03001001-03999999) Backpack Blower
PB-403 (04001001-04999999) Backpack Blower
PB-403H (02001001-02999999) Backpack Blower
PB-403H (03001001-03999999) Backpack Blower
PB-403H (04001001-04999999) Backpack Blower
PB-403T (02001001-02999999) Backpack Blower
PB-403T (03001001-03999999) Backpack Blower
PB-403T (04001001-04999999) Backpack Blower
PB-413 (02001001-02999999) Backpack Blower
PB-413H (02001001-02999999) Backpack Blower
PB-4600 (059919-999999) Backpack Blower
PB-4600 (Type 1E) Backpack Blower
PB-460LN (03001001-03999999) Backpack Blower
PB-460LN (04001001-04999999) Backpack Blower
PB-461LN (02001001-02999999) Backpack Blower
PB-46HT Backpack Blower
PB-46LN Backpack Blower
PB-600 (505401-999999) Backpack Blower
PB-6000 (Type 1) Backpack Blower
PB-6000 (Type 1E) Backpack Blower
PB-601 (501001-506000) Backpack Blower
PB-601 (506001-999999) Backpack Blower
PB-602 (03001001-03999999) Backpack Blower
PB-602 (04001001-04999999) Backpack Blower
PB-603 (03001001-03999999) Backpack Blower
PB-603 (04001001-04999999) Backpack Blower
PB-60HT (001001-568895) Backpack Blower
PB-60HT (568896-999999) Backpack Blower
PB-610 (02001001-02999999) Backpack Blower
PB-611 (02001001-02999999) Backpack Blower
PB-413HT (02001001-02999999) Backpack Blower
PB-4600 (001001-059918) Backpack Blower
PPF-211 (02001001-02999999) Power Pruner Fixed Shaft
LBB-4200 (After S/N 001001)
PB-261i (06001001-06999999) Backpack Blower
LBB-4200 Backpack Blower Lawn Equipment
PB-413T (02001001-02999999) Backpack Blower Lawn Equipment
PB-46HT (001001-999999) Backpack Blower Lawn Equipment
PB-46LN (001001-999999) Backpack Blower Lawn Equipment
PB-600 (001001-999999) Backpack Blower Lawn Equipment
PB-601 Backpack Blower Lawn Equipment
PB-60HT Backpack Blower Lawn Equipment
PB-600 (505401-999999) Backpack Blower
PB-6000 (Type 1) Backpack Blower
PB-6000 (Type 1E) Backpack Blower
PB-601 (501001-506000) Backpack Blower
PB-601 (506001-999999) Backpack Blower
PB-602 (03001001-03999999) Backpack Blower
PB-602 (04001001-04999999) Backpack Blower
PB-603 (03001001-03999999) Backpack Blower
PB-603 (04001001-04999999) Backpack Blower
PB-60HT (001001-568895) Backpack Blower
PB-60HT (568896-999999) Backpack Blower
PB-610 (02001001-02999999) Backpack Blower
PB-611 (02001001-02999999) Backpack Blower
PB-413HT (02001001-02999999) Backpack Blower
PB-4600 (001001-059918) Backpack Blower
PPF-211 (02001001-02999999) Power Pruner Fixed Shaft
LBB-4200 (After S/N 001001)
PB-261i (06001001-06999999) Backpack Blower
LBB-4200 Backpack Blower Lawn Equipment
PB-413T (02001001-02999999) Backpack Blower Lawn Equipment
PB-46HT (001001-999999) Backpack Blower Lawn Equipment
PB-46LN (001001-999999) Backpack Blower Lawn Equipment
PB-600 (001001-999999) Backpack Blower Lawn Equipment
PB-601 Backpack Blower Lawn Equipment
PB-60HT Backpack Blower Lawn Equipment
Products Compatibility
This item works with the following types of products:
- • Blower
- • Pruner
Questions & Answers for Backpack Blower Strap
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
6 of 6 people found this instruction helpful
Tool Type:
Blower
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Socket set, Pliers
Straps were worn out and need replacing.
Removed two nuts and removed old straps. Put new straps on machine with supplied hardware and tightened nuts. Very easy and simple.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
4 of 4 people found this instruction helpful
Tool Type:
Blower
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, Nutdriver
Straps worn out and about to break. One blower tube missing and flex had hole in it
Watch as you remove the bad parts carefully and reverse the process to install the new parts. I would also like to ad that the ereplacementparts.com site did an outstanding job getting my order together and out the door. The price was also about 15% below local dealers and arrived in a couple of days. Also ordering is so simple because of the way the site is laid out. Blown up illustrations of you parts help to make sure you are ordering what you need.
Very pleased with the entire experience and my old blower looks good and works like it did when it was first bought. Thanks and I will use you again.
Very pleased with the entire experience and my old blower looks good and works like it did when it was first bought. Thanks and I will use you again.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Blower
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Wrench Set
Straps were very narrow with no padding
Removed old straps and replaced with new ones / cut the old ones off since the screws were rusted.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Blower
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Socket set
Harness strap was worn
Removed 2 screws took off old strap. Installed new strap with 2 screws about 20 minutes
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Blower
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pliers
The curved tube at the end was missing. The shoulder straps were worn.
1. Attached the curved pipe to the existing pipe. Fit perfect and twist locked.
2. Removed the old shoulder straps and attached the new ones. New screws, bolts and washers identical to the originals were included and fit perfect.
2. Removed the old shoulder straps and attached the new ones. New screws, bolts and washers identical to the originals were included and fit perfect.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Blower
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pliers
The primer bulb cracked and 1 shoulder strap broke after 10 yrs. Amazing!
Removed the 4 screws on the primer bulb plate and replaced primer bulb
Removed old straps and replaced with new ones. Very easy to do both repairs
Removed old straps and replaced with new ones. Very easy to do both repairs
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Blower
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Socket set, Wrench Set
Muffler was bad
Remove cage around blower then remove muffler bolts. They will probably have some metal tabs bent over bolt heads so pry them back with needle nose pliers. Replace muffler and make sure you put the new gaskets on then tighten down. Pretty easy if your bolts aren't rusted tight. Spray with lube and let sit. Maybe heat them with a little propane torch to break them free. Worked for me and my 15 yr old bolts. Good Luck!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Blower
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, Wrench Set
Throttle broke and straps broke
Removed old throttle and straps
installed new throttle and straps
installed new throttle and straps
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Blower
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Nutdriver
Straps had worn thin and needed replacing.
1. Removed old worn straps
2. Placed the end of one strap with the holes over the harness and then slipped one screw through a flat washer and then through one hole, wrapped the strap around the the harness and threaded the screw into the hole, then a flat washer and then threaded a nut onto the screw and tightened with screw driver and nut driver
3. Repeated the process on the other strap.
2. Placed the end of one strap with the holes over the harness and then slipped one screw through a flat washer and then through one hole, wrapped the strap around the the harness and threaded the screw into the hole, then a flat washer and then threaded a nut onto the screw and tightened with screw driver and nut driver
3. Repeated the process on the other strap.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Blower
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Nutdriver
Backpack blower retainer cushions all broke and straps old and torn fuel lines old and brittle ignition switch on off button missing.
1. First I disassembled the ignition switch, the only tool needed was a screwdriver to remove the screws in handle once screws are out separated the handle which opens up down the middle into 2 pieces.
2. Removed switch and all wires from handle and plastic protective tubing that runs to the back of blower.
3. Installed new switch and wiring in reverse fashion, fairly easy, the hardest part was running wires back in protective plastic tubing because you don't want excessive wires in the handle you want just the right amount of wiring needed in handle that way wires don't get pinched.
1. Next I replaced the 3 retainer cushions that hold the blower onto the backpack. Removed all broken cushions with screw driver on blower and screwdriver and nutdriver for the backpack portion.
2. Screwed new cushions onto blower portion, then put blower new cushion threads through backpack mounting holes, used nutdriver to thread nuts onto backpack. Very easy repair.
1.Next I replaced backpack straps screwdriver and nutdriver were the only tools I needed removed old straps and replaced with new ones in reverse fashion, very easy
1. Next I replaced both fuel line running from carb to fuel tank using a screwdriver had to loosen the carb up to gain access to install new lines, old fuel lines just pull right off if they are a little sticky, a flathead screwdriver or plyers should help remove them, new fuel lines just press right on to carb and fuel tank.
2. There also is a plastic protective twine around fuel lines just untwine from old lines and rewind around new lines. Fairly easy
2. Removed switch and all wires from handle and plastic protective tubing that runs to the back of blower.
3. Installed new switch and wiring in reverse fashion, fairly easy, the hardest part was running wires back in protective plastic tubing because you don't want excessive wires in the handle you want just the right amount of wiring needed in handle that way wires don't get pinched.
1. Next I replaced the 3 retainer cushions that hold the blower onto the backpack. Removed all broken cushions with screw driver on blower and screwdriver and nutdriver for the backpack portion.
2. Screwed new cushions onto blower portion, then put blower new cushion threads through backpack mounting holes, used nutdriver to thread nuts onto backpack. Very easy repair.
1.Next I replaced backpack straps screwdriver and nutdriver were the only tools I needed removed old straps and replaced with new ones in reverse fashion, very easy
1. Next I replaced both fuel line running from carb to fuel tank using a screwdriver had to loosen the carb up to gain access to install new lines, old fuel lines just pull right off if they are a little sticky, a flathead screwdriver or plyers should help remove them, new fuel lines just press right on to carb and fuel tank.
2. There also is a plastic protective twine around fuel lines just untwine from old lines and rewind around new lines. Fairly easy
Did you find this story helpful?
Thanks for voting and helping fellow customers!
show more
Reviews
14 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
14
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
- 2
PERFECT FIT.
Great response from Replacements Parts. Leaves are again moving. Greatly appreciated.
Guest -
November 22, 2022
Verified Purchase
exact replacement
Very quick delivery
Guest -
November 15, 2022
Verified Purchase
Great patrs
I’ve been buying parts from e replacement parts for a while and they always seem to have what I need at a reasonable price.
Guest -
July 7, 2022
Verified Purchase
Great replacement straps
Arrived quickly, great fit and quality.
Guest -
June 14, 2022
Verified Purchase
good replacement part
brand new, fit perfectly.
Scott -
January 19, 2021
Verified Purchase
Original parts
Quick shipment. Authentic Echo parts.
Guest -
December 17, 2020
Verified Purchase
Echo Backpack Blower Strap
The Blower strap arrived quickly and work out prefect
Guest -
November 7, 2020
Verified Purchase
Easy repair
Again, we found just what we needed to fix our older blower. Part came very fast, blower now in use again. Quality product, quality service.
Guest -
October 13, 2020
Verified Purchase
Great service!
Thanks! Everything was great!
Guest -
July 7, 2020
Verified Purchase
Great Part, Great Service!
The online manuals and part pages were invaluable and the made the ordering process a breeze. Excellent resource!
Guest -
May 30, 2020
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
- 2
Product Information