eReplacementParts.com
877-346-4814
Bissell Parts
Repair Parts Home
  
Vacuum Parts
  
Bissell Parts
  B-203-6679 Autoload Gasket

Autoload Gasket B-203-6679

OEM part for: Bissell

Part Number: B-203-6679


Install
Videos!
Grid squares measure 1x1 inch
$4.99
In Stock
Ships within 1 business day
Easy 15-30 minutes (2 rated repairs)?
OEM: Original Equipment Manufacturer ?
Bissell
Does this d-block d-md-none fit my product?

Product Description ?

The autoload gasket is made out of rubber and attaches to the tank. This part is available as an individual replacement. This authentic item is supplied directly from the original equipment manufacturer for use with carpet cleaners by Bissell. No tools should be needed during the replacement of this part. It may become broken and will need to be replaced.

  • Classification: Part
  • Weight: 0.01 lbs.
  • Shipping: Ships Worldwide

Compatibility

This part will fit the following 27 machines

Bissell

8920 ProHeat 2X Powersteamer Carpet Cleaner View Diagrams & Manuals
8930 ProHeat 2X Powersteamer Carpet Cleaner View Diagrams & Manuals
9200 ProHeat 2X Powersteamer Carpet Cleaner View Diagrams & Manuals
9200-2 ProHeat 2X Powersteamer Carpet Cleaner View Diagrams & Manuals
9200-5 ProHeat 2X Powersteamer Carpet Cleaner View Diagrams & Manuals
9200-C ProHeat 2X Powersteamer Carpet Cleaner View Diagrams & Manuals
9200-T ProHeat 2X Powersteamer Carpet Cleaner View Diagrams & Manuals
9300-C ProHeat 2X Powersteamer Carpet Cleaner View Diagrams & Manuals
9300-D ProHeat 2X Powersteamer Carpet Cleaner View Diagrams & Manuals
9300-P ProHeat 2X Powersteamer Carpet Cleaner View Diagrams & Manuals
9400 ProHeat 2X Powersteamer Carpet Cleaner View Diagrams & Manuals
9400-C ProHeat 2X Powersteamer Carpet Cleaner View Diagrams & Manuals
9400-H ProHeat 2X Powersteamer Carpet Cleaner View Diagrams & Manuals
9500 ProHeat 2X Carpet Cleaner View Diagrams & Manuals
66Q4 ProHeat 2X Carpet Cleaner View Diagrams & Manuals
66Q42 ProHeat 2X Carpet Cleaner View Diagrams & Manuals
73A5 ProHeat 2X Carpet Cleaner View Diagrams & Manuals
8930M Proheat 2x PowerSteamer View Diagrams & Manuals
86T3 (40M1 Series) Big Green Clean Machine View Diagrams & Manuals
9300-2 ProHeat 2x View Diagrams & Manuals
94004 Proheat 2x Deep Cleaner View Diagrams & Manuals
9400-3 ProHeat 2X Power Steamer View Diagrams & Manuals
9400-4 ProHeat 2X Powerstreamer Carpet Cleaner View Diagrams & Manuals
10N2 Commercial Extractor View Diagrams & Manuals
40M1 Big Green Clean Machine View Diagrams & Manuals
8960 ProHeat 2X Upright Deep Cleaner View Diagrams & Manuals
9300 ProHeat 2X Upright Deep Cleaner View Diagrams & Manuals
Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Vacuum Parts

This part replaces obsolete part #: 203-6679

Questions & Answers ?

Our customer Service team is at the ready daily to answer your part and product questions.

photo of team member
Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Questions & Answers for Autoload Gasket


No questions have been asked yet

Customer Repair Instructions ?

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 15-30 minutes (2 rated repairs)?

Would not pick up dirty water from cleaned area.

SEAN - September 26, 2018
Initial problem was would not pick up water after cleaning from carpet. Tested at vacuum motor, had good suction there, diagnosed problem to dried out seals on pick-up side. Replaced seals to correct problems.
1) Dis-assembled to locate seals needed.
2) Re-assembled right away with old original parts.
3) Ordered parts needed.
On arrival of parts.
4) Inspect parts and sorted order needed to go in starting at base up.
5) Dis- assembled replacing parts one for one, like for like.
6) To optimize good sealant used silicon faucet grease on seals light coat only. (It is light and water resistant). Aids in assembly lubrication.
6) Tested good.
Note: Correct installation per mfg. directions is important. Top vacuum chamber drops in front and hooks in the bottom front dropping down in the rear into the upper duct assembly. Soap dispenser must be in place.
Did you find this story helpful?
Thanks for voting and helping fellow customers!

Air was leaking into the tank creating suction problems and air bubbles

Duaine - February 1, 2017
👍 0 of 1 people found this instruction helpful
Tool Type

Vacuum

Difficulty

Easy

Time

Less than 15 minutes

Tools Used

, no tools needed

I removed the tank and lifted the old gasket out and replaced it with the new one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!

OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

eReplacementParts.com
7174 South 400 West
Suite 5
Midvale, UT 84047
visa mastercard discover american express PayPal