Install
Videos!

Watch The
Repair Video

Belt-v Type 954-04050A

Part Number: 954-04050A

27 Reviews

Order within the next 6 hours
and your part ships today!

Questions & Answers

Repair Instructions

*This part replaces obsolete part #: 954-04050, 954-040 ((265, 270, 370 Engine)), OEM-754-04050, 754-04050 and 954-04050 ((265, 270, 370 Engine)).

Product Information

Description:

This replacement V-Belt is a genuine OEM sourced part, not an aftermarket imitation. It is commonly utilized on snow blowers. This is the drive belt that would spin the augers. Inspect belts periodically and replace them when worn or stretched to maintain peak performance. This part is made from rubber material and it is sold individually.

To replace this belt you will need a wrench set.

Warning: California's Proposition 65

Frequently Purchased With

Belt-v 3/8 X 3..
$31.98

Belt-v Type 3l..
$31.13

Belt:2l:33.0 L..
$16.45

Cable-auger Dr..
$23.53

Belt-3/8 X 29..
$30.21

Friction Wheel..
$38.36

Pin-bow Tie Co..
$3.99

Compatibility

This part is compatible with the following machines:

MTD

Yard Machines

31AE6GLF723 (2005) Snowblower
31AE6LFH718 (2005) Snowblower

31AE6LLG723 (2005) Snowblower

Yard Man

31AE5KLF701 (2005) Snowblower
31AE5KLF801 (2005-2) Snowblower
31AE6GLF701 (2005) Snowblower
31AE6GLF801 (2005-2) Snowblower

31AH6LLH801 (2005-2) Snowblower
31AE5KLF801 (2006) Snowblower
31AE5KLG801 (2007) Snowblower

Expand the 150+ compatible machines

Products Compatibility

This item works with the following types of products:

• Snowblower

Questions & Answers for Belt-v Type

Sort by

I am trying to get the correct Auger replacement belt for this craftsman 179 CC 26 inch chute.

Steven for model number 31AM63TF799 asked on 2024-01-15

Hello Steven, thank you for your question. Yes, the is Belt-v Type 954-04050A that you had chosen is correct. Glad to help.

What are the dimensions of this part?

Mike for model number 31A-2M1E706 asked on 2023-02-12

Hello Mike, Thank you for your inquiry. We show this belt as 35 inches long by 1/2 inch wide. We hope this helps you.

Will this Drive belt work on my Craftsman snow blower model 247889701

Robert for model number 247889701 asked on 2022-12-06

Hello Robert, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part Number: 954-04050A. Thank you for your inquiry, good luck with this repair!

What are the dimensions are this part ?

Randy for model number 247886941 asked on 2022-06-17

Hello Randy, thank you for writing. The belt measures approximately 35 inches long by 0.5 inches wide. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.

Belt burned out. have a 21" 179cc troy built snow blower. What belt is needed

James for model number 31PS2S5G723 asked on 2022-02-19

Hi James, Thank you for your question. The part number listed under your model number for the belt is 954-04050A. If you would like to place an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!

What is the length of the augar vbelt

Tom for model number 31AM62EE752 asked on 2022-02-01

Hi Tom, Thank you for your question. The belt measures approximately 35 inches long by 0.5 inches wide. If you would like to place an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!

Repair Instructions: Submitted by Customers Like You

4 of 5 people found this instruction helpful

Tool Type:

Snowblower

Parts Used:

Belt-v 3/8 X 34.4 - 954-0367

Belt-v Type - 954-04050A

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Socket set, Wrench Set, Adjustable Wrench

Belts on snow blower for 4 years replaced before I had breakdown

Take belt guard off and replaced belts, easy

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Snowblower

Parts Used:

Belt-v Type - 954-04050A

Repair Difficulty:

Medium

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Pliers, Socket set, Adjustable Wrench

Auger belt was old

Slipped off the old one and put new one on. New one was a lot tighter

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Snowblower

Parts Used:

Belt-v 3/8 X 34.4 - 954-0367

Belt-v Type - 954-04050A

Repair Difficulty:

Medium

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Socket set, Wrench Set, None

Belts on snowblower needed replacement

1 Remove the belt cover and disengage both belts
2 tilt snowblower up and remove bottom plate then remove old belts
3 put new belts on tilt back down finish installing the belts around the pulleys. Replace covers.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Snowblower

Parts Used:

Belt-v Type - 954-04050A

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Socket set, Adjustable Wrench, channel locks, needle nose

auger would not turn

1)removed gas from tank via hand pump in order to flip snowblower up on its auger housing
2)removed plastic pull/belt cover with socket wrench(top)
3)rolled defective belt off pulley
4)flipped machine up on auger housing
5)removed the bottom cover using socket/wratchet
6)removed the shoulder screw
7)removed auger brake bracket spring with needle nose
8)put a clamp on auger control handle to make it easier to remove belt
9)removed old belt(slipped it out between support bracket and auger pulley
10)installed new belt by going in reverse order
11)checked to make sure auger was tuning and checked cable adjustment

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Snowblower

Parts Used:

Belt-v Type - 954-04050A

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Wrench Set, Adjustable Wrench

Snow blower wouldn’t drive through the snow itself

Replace drive belt skid plate and auger bladesDid repair according to instruction manual

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Snowblower

Parts Used:

Belt-v 3/8 X 34.4 - 954-0367

Belt-v Type - 954-04050A

Repair Difficulty:

Medium

Time Spent Repairing:

More than 2 hours

Tools Used:

Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver

Worm Gear

Easy take apart but needed help to put back together , had a bit of a time by my self, but all and all not to bad to do, and best of all everything works great thank you..

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Snowblower

Parts Used:

Belt-v Type - 954-04050A

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Wrench Set

Worn belt

Removed the auger assembly . Then replaced worn belt.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Snowblower

Parts Used:

Belt-v Type - 954-04050A

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Socket set, Wrench Set

Auger stopped turning. No adjustment available.

Watched youtube first. Followed instructions. Done.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Snowblower

Parts Used:

Belt-v Type - 954-04050A

Belt-v Type 3l 34. - 954-04260

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Screwdriver, Socket set, Wrench Set

The auger and drive belts were slipping

I watched a video on YouTube it made the job very easy.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Snowblower

Parts Used:

Belt-v Type - 954-04050A

Repair Difficulty:

Medium

Time Spent Repairing:

30-60 minutes

Tools Used:

Socket set, Wrench Set, Lithium and wheel bearing grease

Auger wouldn’t turn. Burned belt

Siphon gas tank. Remove spark plug wire. Remove cover to belt. Remove belly pan. Remove belt stop bolt. Remove burned belt. Grease axle and gears. Install new belt. Re install belt stop bolt, belly pan, belt cover, spark plug . I watched a very informative YouTube video prior to repair. In my case I had a huge animal nest in the compartment with the gears and belt.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Reviews

Average Rating (out of 5):

27 Reviews

Click to filter by ratings:

5 stars

4 stars

3 stars

2 stars

1 stars

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

Easy to search for by model #

Snowblower belt

Guest - 19 days ago Verified Purchase

Had exactly what I needed.

John - March 21, 2023 Verified Purchase

Great timing!

I am glad you sent this reminder as I have been busyv put snow blowing that I could not have done without you having gone the extra mile to get Correct belt. Your customer service agent is FANTASTIC! Thank you very much. Richard Carroll.

Guest - December 20, 2022 Verified Purchase

Replacement belts for snow blower

Received the correct belts. Removed old belts and installed new ones. Snow thrower runs much better now. Won't know for sure until it snows but ran blower with covers off and could see that belts ran much tighter to the pulleys, no wobbling.

Guest - September 22, 2022 Verified Purchase

easy to Replace part

snow blower working great

Guest - August 16, 2022 Verified Purchase

Auger Belt

Received the part quickly. It fit perfectly. And my snowblower is ready for this winter

Guest - August 1, 2022 Verified Purchase

Good site easy to navigate. Found the exact part I needed.

Part arrived on time and was what I ordered

Guest - March 14, 2022 Verified Purchase

My auger is back working

Thank you.

Vincent - February 19, 2022 Verified Purchase

These guys rock!

It was the right part at a good price, came quickly. I have ordered all kinds of parts for many different kinds of repairs from these folks and it's always been good

Guest - February 5, 2022 Verified Purchase

Right part, speedy delivery.

My part arrived quickly and equally important it was OEM for my 10+ yo Craftsman-branded snowblower. I cant count on Sears/Craftsman anymore, so I count on your firm to have my back. Thanks!!!

Ken - January 31, 2022 Verified Purchase

Verified Purchase

eReplacementParts Team

Sort by:

Highest Rating
Most Recent

< PREV

NEXT >

Product Information