Assy-ground Switch 530053920
Part Number: 530053920
Order within the next 2 hours
and your part ships today!
and your part ships today!
*This part replaces obsolete part #: 530053921, 530014707 and 530038474.
Product Information
Description:
| This is an OEM part sourced directly from the manufacturer. The ground switch assembly is commonly found in trimmers and edgers from Weed Eater. This part is a complete switch assembly, which is used to turn the machine off. You may require an Allen wrench or screwdriver when replacing this item. The ground switch assembly is available as an individual replacement part. |
Compatibility
This part is compatible with the following machines:
the 13 compatible machines
Products Compatibility
This item works with the following types of products:
- • Edger
- • Trimmer
Questions & Answers for Assy-ground Switch
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Edger
Parts Used:
Repair Difficulty:
Hard
Time Spent Repairing:
More than 2 hours
Tools Used:
Screwdriver, Socket set
The edger on/off switch had to be replaced.
1.Remove the spark plug.
2. Remove the wheel.
3. Remove all the screws holding the engine cover.
4. Remove all screws holding the carburetor being careful with the gaskets.
5. Disconnect the accelerator cable from the carburetor.
6. Remove the green engine cover.
7. Remove The on/off switch and disconnect the two wires on the switch.
8. Reassemble in the reverse order.
2. Remove the wheel.
3. Remove all the screws holding the engine cover.
4. Remove all screws holding the carburetor being careful with the gaskets.
5. Disconnect the accelerator cable from the carburetor.
6. Remove the green engine cover.
7. Remove The on/off switch and disconnect the two wires on the switch.
8. Reassemble in the reverse order.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information
