Why Read This Article?

Finish Nailer Repair - Replacing the Driver Guide (Ridgid Part # 79004001022)

Article Breakdown

Finish Nailer Repair - Replacing the Driver Guide (Ridgid Part # 79004001022)

Video

Tools & Materials

Tools Required: None required

How to Replace the Bump Cap on a Black and Decker Trimmer

Find Official Black and Decker Trimmer Parts that Fit

Finish Nailer Repair - Replacing the Driver Guide (Ridgid Part # 79004001022)

The bump cap attaches to the trimmer head hub and holds the spool in place. The cap attaches to the hub with two plastic locking tabs. Eventually, these locking tabs might fail, and the cap will no longer hold the spool in place.

Let's get started.

REMOVING THE BUMP CAP 1. Remove the bump cap.

a. Depress the two locking tabs on the sides of the bump cap.

b. Remove the bump cap from the trimmer head.

INSTALLING THE NEW BUMP CAP

2. Install the bump cap.

a. Position the new bump cap over the spool.

b. Align the locking tabs on the bump cap with the slots on the hub.

c. Press firmly on the bump cap to engage the locking tabs.

SHOP FOR BLACK AND DECKER TRIMMER PARTS

Need Black and Decker trimmer parts? We'd love to help you find the one you need.

Shop our wide selection of Black and Decker Trimmer Parts straight from the manufacturer and we will have the right fit to you in no time.