eReplacementParts.com
877-346-4815
Repair Center
Preferred Partners of
Repair Center
  How to Replace the Carburetor Gasket on a Ryobi Trimmer

Why Read This Article?

Finish Nailer Repair - Replacing the Driver Guide (Ridgid Part # 79004001022)

Article Breakdown

Finish Nailer Repair - Replacing the Driver Guide (Ridgid Part # 79004001022)

Video

Tools & Materials

Fix Factor: Easy Duration: About 10 minutes Frequency: As necessary Tools Required: Phillip's / Torx drivers Part #: 791-610675

How to Replace the Carburetor Gasket on a Ryobi Trimmer

Finish Nailer Repair - Replacing the Driver Guide (Ridgid Part # 79004001022)
Replacing the carburetor gasket on a Ryobi trimmer The Facts

String trimmer out of whack? It's time to face the fix. Whether you are a legendary landscaper or a weekend weed whacker, eReplacementParts.com provides the parts, procedures and facts you need to fearlessly fix what fails you.

The carburetor gasket forms a seal between the carburetor and the engine. The gasket typically only needs to be replaced as part of a larger repair project (especially if the carburetor is removed). It is important to replace the gasket at that point, however, because a bad gasket can create an air leak between the carburetor and the engine. This will cause the engine to run lean, potentially causing permanent damage.

This article will guide you through the steps required to remove and install the carburetor gasket on a Ryobi trimmer.

Let's get started.

The Fix   REMOVING THE CARBURETOR GASKET [top] 1. Remove the rear cover.

Remove the (4) screws from the rear cover.

Remove the rear cover screws

 

 

Remove the rear cover from the engine.

Remove the rear cover

 

 

  2. Remove the carburetor gasket.

Remove the (2) screws from the carburetor assembly.

Remove the screws

 

 

Remove the choke plate and choke assembly from the carburetor.

Remove the choke assembly

 

 

Disconnect the throttle cable from the carburetor (this is accomplished using a lift-and-tilt motion).

Remove the throttle cable

 

 

Remove the carburetor gasket.

Remove the old gasket

 

    INSTALLING THE NEW CARBURETOR GASKET [top] 3. Install the carburetor gasket

Install the new carburetor gasket.

Install the new gasket

 

 

Connect the throttle cable onto the throttle linkage of the carburetor.

Connect the throttle cable

 

 

Install the carburetor mounting screws onto the choke plate and lever.

Install the screws

 

 

Secure the carburetor (and choke plate) to the engine with the (2) screws. Note that the choke lever and the wavy washer must be properly aligned before tightening the upper screw.

Secure the carburetor

 

 

  REASSEMBLING THE UNIT [top] 4. Reinstall the rear cover.

Reinstall the rear cover onto the engine.

Install the rear cover

 

 

Secure the rear cover with the (4) screws.

Secure the rear cover The Finish

You don't have to leverage your savings to level your lawns. As you just learned, repairing your own equipment is easy when you follow our step-by-step guides. Not only did you restore trimmer functionality at a fraction of the cost of replacement; you have taken the edge off of future repairs, wherever you may find them.

Find your next fix here.   [top]

SHOP FOR RYOBI TRIMMER PARTS
Need Ryobi trimmer parts? We'd love to help you find the one you need.
Shop our wide selection of Ryobi Trimmer Parts straight from the manufacturer and we will have the right fit to you in no time.

Organize Your Home in a Snap!

The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!

"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away ... Very convenient. I'm impressed."
★★★★★ -Clever Jeff ★★★★★

eReplacementParts.com
7174 South 400 West
Suite 5
Midvale, UT 84047
visa mastercard discover american express PayPal