Why Read This Article?
Finish Nailer Repair - Replacing the Driver Guide (Ridgid Part # 79004001022)
Article Breakdown
Finish Nailer Repair - Replacing the Driver Guide (Ridgid Part # 79004001022)
Video
Tools & Materials
Browse our entire collection of Toro 51443 parts, here. Replacing the Spool
1. Remove the old spool cap
Use your fingers to press in on the two tabs on the sides of the spool and pull the cap away.
2. Remove the spool
Now that you've removed the spool cap, the spool will just pull away from the trimmer.
3. Install the new spool
Set the new spool over the spring and line up the trimmer line with the eyelet.
4. Replace the spool cap
Line up the tabs on the spool cap with the openings on the spool and snap the cap back into position.
[Back to Top]
Conclusion
And that's how easy it is to replace the spool in your Toro string trimmer. If you need help installing or replacing a spool on a different brand of trimmer, search our YouTube channel to find what you need.
Don't forget that we have all of the string trimmer parts you could possibly need.
[Back to Top]
What We're About
