Product Information
Frequently Purchased With
Compatibility
This part is compatible with the following machines:
Products Compatibility
This item works with the following types of products:
- • Demolition Hammer
Questions & Answers for Armature Assembly 115v
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
1 of 3 people found this instruction helpful
Tool Type:
Demolition Hammer
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Power Drill, Socket set, Nutdriver
Hm1810 Makita Demolition Hammer Won\
Plug was changed and person changing it shorted the hot side to ground. Cause and effect: Armature shorted. Ordered new Armature, and changed it out. step by step. Remove handle assembly, fan, windings, bench test all. Remove armature, growl test, bad. Install new armature. Install holder, fan ,handle, switch etc. install new plug to replace burn't plug. Start and run.
Check amperage draw, 10amps. Running. Unit is 15 amp Hammer.
Clean unit and return to service.
Check amperage draw, 10amps. Running. Unit is 15 amp Hammer.
Clean unit and return to service.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information