Armature and Bearings 153527-00SV
Part Number: 153527-00SV
Product Information
Description:
| Original Dewalt replacement Armature Assembly used on some Table Saws. This item includes an Armature, Fan, End Bearing, Commutator End Bearing, and the fan with pulley. Remember to be especially careful of the armature fan when you remove it, because if you break it, you will have to replace the entire armature. Due to constant contact with Carbon Brushes armature will eventually wear out and would need to be replaced. It is highly recommended to replace both Carbon Brushes when replacing an armature. Includes part numbers 144803-00, 330003-13 and 330003-09 |
No Longer Available:
Unfortunately, this part isn't available any more at eReplacementParts. This could be because:
- The manufacturer doesn't make this part any more
- There are no substitute parts made by the manufacturer to replace this part
- There is no longer any way for us to find this part and stock it in our warehouse
We would love to help you find the part you need, but our call center agents will, regrettably, be unable to assist you with tracking it down. However, you may still be able to locate the part you need by trying the following:
- Using a search engine to type your part number and see if other retailers still have this part in stock
- Visiting online stores such as eBay and finding sellers that have this part
- Trying retailers and repair stores in your local area to see if they have the part in their inventory
- Talking to a local repair technician, who may have the part you need, or may be able to repair your existing part
- Reaching out to the manufacturer of your product to see what their recommendations are for replacing this part
