Easy
Less than 15 minutes
This is an original part from Jet. The arbor mt2xj3 is compatible with several drill presses, and is sold individually. The metal item is fitted onto the spindle, this component helps to hold the chuck. A hammer, chuck key and a hex wrench are often necessary for the repair, and the arbor is sold individually.
Arbor Mt2xjt3 561766
OEM part for: Jet
Part Number: 561766
$29.36
In Stock
Order within the next 3 hours and your part ships today! 
Compatibility
This part will fit the following 3 machines
Jet
JDP-17MF (354169) 17 in. Drill Press View Diagrams & Manuals
JDP-12 (707300) 12" Variable Speed Drill Press View Diagrams & Manuals
JDP-14MF Drill Press View Diagrams & Manuals
This item works with the following types of products:
- Drill Parts
- Drill Press Parts
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Arbor Mt2xjt3
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Chuck jaws wouldn't tighten.
Jarvis - March 16, 2019
Tool Type
Drill Press
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Wedge
Parts Used
Tapped wedge through the hole in the arbor holder to remove old arbor. Inserted new arbor and chuck.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The spindle shaft was bent , I got a free jet drill press and that was the only problem.
Russell - October 24, 2018
Tool Type
Drill Press
Difficulty
Medium
Time
Less than 15 minutes
Tools Used
, Hammer and 3/8” punch
Parts Used
I removed the drill chuck and Morse taper then drove the spindle shaft out from the drill chuck . I got the new spindle and put it in the drill chuck and tapped it on a vise hard to seat it into the chuck. Installed the Morse taper in the drill press and tested it and it worked fine .
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Stripped teeth on chuck
John - March 19, 2018
Tool Type
Drill Press
Difficulty
Easy
Time
15-30 minutes
Tools Used
, Hammer and wedge
Parts Used
Drove wedge into hole in to the quill with a hammer and tapped until arbor and chuck dropped from spindle. Then installed the new arbor and chuck by tapping with a wood block and hammer upward.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Replaced the drill chuck and the arbor.
Tom - August 7, 2017
Tool Type
Drill Press
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Hammer
Parts Used
Used a drift wedge to remove the old chuck and the arbor. Installed the new parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
