Medium
15-30 minutes
This is an authentic DeWalt replacement part, sourced from the original manufacturer for use with table saws. The spindle assembly is used to link the saw blade and pulley. This item is a complete part that includes the ball bearing and is sold as an individual replacement part.
Arbor Assembly 388313-00
OEM part for: DeWALT
Part Number: 388313-00
$81.58
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Compatibility
This part will fit the following 3 machines
DeWALT
DW746X Type 1 Table Saw View Diagrams & Manuals
DW746 Type 1 Table Saw View Diagrams & Manuals
DW746XS (Type 1) Contractor Tablesaw W/Sliding Table & Saw Wing View Diagrams & Manuals
This item works with the following types of products:
- Saw Parts
- Table Saw Parts
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Arbor Assembly
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Replaced arbor and arbor nut.
Robert - August 1, 2018
👍 1 of 1 people found this instruction helpful
Tool Type
Table Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Torx driver on wratched, 19 mm ratcheting box end wrench
Parts Used
1. Tapped out old arbor with brass hammer after removing pulley.
2. Put new arbor in freezer for a couple of hours to shrink it.
3. Lubricated arbor bearings outer race with white grease so wouldn't rust.
4. Dropped in new arbor without any force what so ever.
5. Put pulley back on and tightened nut to pull in and hold bearings.
6. Aligned heel on blade and fence.
7. Worked fine, all was good.
Replaced it with a lot less problem than I anticipated.
2. Put new arbor in freezer for a couple of hours to shrink it.
3. Lubricated arbor bearings outer race with white grease so wouldn't rust.
4. Dropped in new arbor without any force what so ever.
5. Put pulley back on and tightened nut to pull in and hold bearings.
6. Aligned heel on blade and fence.
7. Worked fine, all was good.
Replaced it with a lot less problem than I anticipated.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
threads on arbor where damaged
Leroy - August 5, 2021
Tool Type
Table Saw
Difficulty
Medium
Time
15-30 minutes
Tools Used
Socket set, Hammer, wood block
Parts Used
By tilting and adjusting the position of the arbor I was able to remove the retaining nut. I used a hammer to drive the old arbor out of the bearing. I replaced the left bearing as well as the arbor using a wood block to tap both into place. I used the retaining nut to pull the arbor into place. This wad somewhat difficult because I had to put the pulley on the shaft as well. Getting all of that aligned was not easy especially working under the saw table. Suggest cutting a block of wood to slip on the threads in place of the pulley then using the nut to pull the arbor into the left bearing. Then add the pulley.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
