eReplacementParts.com
877-346-4814
Makita Parts

Anvil M 326188-1

OEM part for: Makita

Part Number: 326188-1


Install
Videos!
Anvil M - 326188-1:Makita 360 View
Anvil M - 326188-1:MakitaAnvil M - 326188-1:MakitaAnvil M - 326188-1:Makita 360 ViewAnvil M - 326188-1:Makita
$9.48
In Stock
Order within the next 3 hours and your part ships today!
Easy Less than 15 minutes (5 rated repairs)?
OEM: Original Equipment Manufacturer ?
Makita
Does this d-block d-md-none fit my product?

Product Description ?

  • Classification: Part
  • Weight: 0.10 lbs.
  • Shipping: Ships Worldwide

Frequently Purchased Together ?

Compatibility

This part will fit the following 18 machines

Makita

LXDT08 18V LXT Lithium-Ion Brushless Cordless Impact Driver View Diagrams & Manuals
LXDT08Z 18V LXT Lithium-Ion Brushless Cordless Impact Driver View Diagrams & Manuals
DTD129RFE (Type 1) Drill / Driver View Diagrams & Manuals
DTD129RFE (Type 2) Drill / Driver View Diagrams & Manuals
DTD129RME (Type 1) Drill / Driver View Diagrams & Manuals
DTD129RME (Type 2) Drill / Driver View Diagrams & Manuals
DTD129SYE (Type 1) Drill / Driver View Diagrams & Manuals
DTD129SYE (Type 2) Drill / Driver View Diagrams & Manuals
DTD129Z (Type 1) Drill / Driver View Diagrams & Manuals
DTD129Z (Type 2) Drill / Driver View Diagrams & Manuals
LXDT08C1 (Type 1) Drill / Driver View Diagrams & Manuals
LXDT08C1 (Type 2) Drill / Driver View Diagrams & Manuals
LXDT08 (Type 1) Drill / Driver View Diagrams & Manuals
LXDT08 (Type 2) Drill / Driver View Diagrams & Manuals
LXDT08Z (Type 1) Drill / Driver View Diagrams & Manuals
LXDT08Z (Type 2) Drill / Driver View Diagrams & Manuals
XDT08 Drill / Driver View Diagrams & Manuals
XDT08Z Drill / Driver View Diagrams & Manuals
Show More Compatible Models
Don't see yours? Try searching our site for :

This item works with the following types of products:

  • Impact Driver Parts

Questions & Answers ?

Our customer Service team is at the ready daily to answer your part and product questions.

photo of team member
Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Questions & Answers for Anvil M


No questions have been asked yet

Customer Repair Instructions ?

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy Less than 15 minutes (5 rated repairs)?

Bit stuck in anvil

Steven - July 17, 2017
👍 1 of 1 people found this instruction helpful
Tool Type

Impact Driver

Difficulty

Easy

Time

Less than 15 minutes

Tools Used

Screwdriver

Removed washers, spring and outer casing and replaced w/new anvil. Put back together in reverse order. Good as new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!

LED didn’t work. Arbor was wobbly. Cases shot

James - February 16, 2022
Tool Type

Impact Driver

Difficulty

Easy

Time

Less than 15 minutes

Tools Used

Power Drill

Removed screws and split the cases. Cleaned , regreased, reassembled with new parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!

Drill bit stuck and broke off in the chuck

J. - February 16, 2019
Tool Type

Impact Driver

Difficulty

Medium

Time

15-30 minutes

Tools Used

Screwdriver, Pliers

1. I reviewed the parts detail that your site provided.
2. I took the front part of the driver apart and identified the parts I would need for the repair.
3. I ordered the parts. They arrived within 3 days.
4. I installed the parts following the parts detail provided by the website.
5. The sleeve only goes on one way to allow the flat washer to seat below the ring spring. If you are not careful the ring spring can fly off under tension as you take it off and put it back on.
6. The rest was easy. Works great and for $15 including shipping I saved a $100 replacement cost or repair bill.
Did you find this story helpful?
Thanks for voting and helping fellow customers!

Broken off bit in chuck

David - September 25, 2018
Tool Type

Impact Driver

Difficulty

Easy

Time

Less than 15 minutes

Tools Used

Screwdriver

Disassembled drive end, removed chuck (anvil) and put new one in. I had previously lost one of the lock balls, so put new one in. Very straight forward. Works like new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!

Drive shaft was loose (wobbly)

Clint - March 7, 2016
Tool Type

Impact Driver

Difficulty

Medium

Time

Less than 15 minutes

Tools Used

Screwdriver, Pick, & very small screwdriver

Pull c clip off end of drive. Disassembled chuck don't loose spring, washer, and small ball. Remove 4 Phillips screws. Remove damaged parts and replace. Took like 10 minutes and $30 in parts. Like new impact now.
Did you find this story helpful?
Thanks for voting and helping fellow customers!

OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.

Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.

Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.

Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.

All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.

This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.

eReplacementParts.com
7174 South 400 West
Suite 5
Midvale, UT 84047
visa mastercard discover american express PayPal