Air Vent Sealing Ring 09907
Part Number: 09907
Order within the next 12 hours
and your part ships today!
and your part ships today!
Product Information
Specifications
|
Description:
This is a genuine Presto replacement part, it is sold individually. The purpose of the 09907 Pressure Canner Sealing Ring/Air Vent is two-fold. The sealing ring is used to create a seal between the Pressure cooker lid and the pressure cooker pot. In the event if the pressure regulator fails, and to much pressure builds up in the pot, the Air Vent will pop out of the lid releasing the excess pressure in the pot. |
Frequently Purchased With
Compatibility
This part is compatible with the following machines:
the 16 compatible machines
Repair Guides
Articles:
Step-by-step instructions for removing and installing the sealing ring and air vent on your Presto pressure canner....
September 01, 2017
|
Questions & Answers for Air Vent Sealing Ring
I am searching for a sealing ring for a presto cooker-canner. Do you have one I can order?
Jean
for model number Models 0171001 0174001
asked on 2023-03-28
Hello Jean, Thank you for your inquiry. Researching the model numbers that you have provided, we show the compatible sealing ring as part# 09905, which includes both the sealing ring and safety vents. We hope this helps you.
eReplacementParts Team March 28, 2023
Do you sell the rubber seal for the lid?
Tommy
asked on 2023-02-16
Hello Tommy, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part Number: 09907. We hope this information is useful!
eReplacementParts Team February 16, 2023
This canner is old, it cans 7 gts or 22 pints, the book says no.1075 sealing ring, not completely this is the right book. Can you help me? I have no model no.
Linda
asked on 2022-08-18
Hello Linda, thank you for writing. Air Vent Sealing Ring is part number 09907. Fits 16 and 21 quart Presto pressure cooker models 7, 7S, 7AV, 7B, CA16, 21, 21S, 21AV, 21B, CA21, 01/CA16H, CA-16H, 01/CA-21H and CA-21H. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
eReplacementParts Team August 18, 2022
my canner is 12.5 across with this ring fit
Deb
asked on 2022-08-03
Hi Deb,
Thank you for your question. The sealing ring has a total length of 42 inches. If you could resubmit your question with the model number from your canner, we would be happy to verify if this is the correct part for it. According to the Presto website, the model number may be found stamped on the bottom of the body, on the side of the body just below the body handle, or on a tag on the cover. We are open 7 days a week. We look forward to hearing from you!
eReplacementParts Team August 03, 2022
I am ordering a replacement sealing ring with vent for an old 1975 Presto pressure canner, model number 01/CA-16H. Should I order this one--09907? Thanks.
Judy
for model number Presto 01/CA-16H
asked on 2022-07-10
Hello Judy, thank you for your question. Yes, the Sealing Ring Air Vent Sealing Ring you had chosen is compatible with your model. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
eReplacementParts Team July 10, 2022
Need sealing ring for canners. Which one fits?
Kay
for model number 0178107 0174510
asked on 2022-04-29
Hi Kay,
Thank you for your question. The part number listed under your model number for the sealing ring that will fit both canners is 09985. If you need help placing an order for them, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
eReplacementParts Team April 29, 2022
What is the part number for the air vent for the National No 7 canner?
Donna
for model number National No 7
asked on 2022-02-21
Hello Donna, Thank you for your inquiry. We have researched the model number you have provided and show the compatible part number as 09907. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
eReplacementParts Team February 21, 2022
Repair Instructions: Submitted by Customers Like You
9 of 9 people found this instruction helpful
Tool Type:
Rice Cooker
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, 1
Sealing ring worn.
Removed the old ring. Cleaned the area in the lid where the ring is placed. Inserted new ring, removed the old air vent and replace with it with the new one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Rice Cooker
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Rubber sealing rings were old and rotten
I removed the old seal from the lid, then clean the slot that the seal had been in. I then pressed the new seal in the lid. Then popped the old vent out and installed the new vent.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Rice Cooker
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Pliers, Adjustable Wrench
Gasket and air vent needed to be replaced and steam gauge was not accurate on my pressure canner.
1. Removed the steam gauge with an adjustable wrench and replace with the same wrench.
2. Used pliers to replace air vent.
3. Just inserted the sealing ring.
Very easy!
2. Used pliers to replace air vent.
3. Just inserted the sealing ring.
Very easy!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Rice Cooker
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, no tools needed
Needed gasket
Very simple repair that did not require any tools, just removed old parts and put the new ones in.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Rice Cooker
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, no tools needed
This was NOT a rice cooker (rice cooker being the only option. )My pressure canner needed a new gasket
I inserted the gasket into the canner lid but there was almost 2 inches too much gasket for the canner lid
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Rice Cooker
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Seal was old, and pressure regulator was missing.
Replaced the seal and installed the regulator.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Rice Cooker
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
My old pressure cooker needed new parts
I replaced the large rubber seal, the air vent, and the regulator, and then also replaced the handles that had broken.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
48 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
40
4 stars
6
3 stars
0
2 stars
0
1 stars
2
< PREV
- 1
- 2
- 3
Good product
The cooker gasket arrived quickly and fit perfectly. Very satisfied. I had ordered a cheaper item which did not fit and had to be returned.
Guest -
November 12, 2023
Verified Purchase
Awesome sauce
I love these guys! Every single time I get something from them the turnaround time is great. They always seem to have just what I need. This canner ring was so hard to find. I tried one that said it would work and nope! But I ordered from here which I should have done first and BINGO. It worked. Another happy customer
Thanks again
Bonnie -
October 12, 2023
Verified Purchase
Perfect part
I am so impressed with this company. The model no. wasn’t clear and the customer service person helped me problem solve the situation, quickly getting me a crucial part for an old pressure canner. She saved the day, as I was smack dab in the middle of canning! I’ll definitely use this company again.
Guest -
September 5, 2023
Verified Purchase
Pressure canner seal
Parts came very quickly, fit perfectly nad now my pressure canner is acting like it's brand new again!!!
Patricia A -
August 20, 2023
Verified Purchase
Fit like a Glove
Good quality parts and fit like a glove....perfect, thanks
Guest -
June 3, 2023
Verified Purchase
Work great what we needed
Arrived quickly. Fit perfectly,
Guest -
May 5, 2023
Verified Purchase
Part replacement
Received and fit our canner perfect.
Guest -
September 10, 2022
Verified Purchase
Great part
Our canner is very old. We were glad we could still find parts for it.
Guest -
September 2, 2022
Verified Purchase
Easy ordering & fast service
This had to be the easiest ordering and fastest part turnaround I've had for a long time. Nice to find a place that has all the parts I need for the older products.
Guest -
August 1, 2022
Verified Purchase
Exactly what I needed.
My order arrived in record time. I thought that it was the wrong seal but I was wrong. I called Presto pressure cookers and was told that I had to install in a different way. I did and it is perfect!
Anonymous -
June 15, 2022
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
- 2
- 3
Product Information
Repair Guides
Articles:
Step-by-step instructions for removing and installing the sealing ring and air vent on your Presto pressure canner....
September 01, 2017
|