Air Filter 502844401

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Socket set

Needed new sparkplug and filter

1. Removed Spark Plug from Blower
2. Replaced Spark plug.
3. Removed cover to air filter.
4. Wiped down and blew out any debris.
5. Replaced air filter
6. Replaced cover to air filter
7. Added 50 to 1 fuel.
8. Started Blower and tested. Worked Great!

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Blower

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

, No tools necessary, remove two wing nuts.

Filter was deteriorating

Remove two wing nuts from filter cover, remove old filter and replace new, install filter cover, takes about five minutes.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Blower

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

, None

Hard to start

Remove old filter clean and replace with new filter

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Blower

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Socket set, Flexible grabbing tool

Routine maintenance tuneup

1. Loosened and removed wing nuts that hold air filter cover.
2. Removed old filter, wiped inside where the filter sits.
3. Replaced cover.
4. Removed old spark plug and replaced with new one.
5. Opened fuel cover.
6. Used grabbing tool to pull fuel line out of fuel reservoir.
7. Pulled old fuel filter off end of fuel line and replaced with new fuel filter.
8. Returned fuel line into reservoir.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Blower

Parts Used:

Pipe C - 595847007

Repair Difficulty:

Easy

Time Spent Repairing:

30-60 minutes

Tools Used:

Pliers, Wrench Set, Torx bit

Motor wasn't getting enough fuel.

Removed fuel tank, fuel lines and fuel filter.
Reinstalled new items.
Problem solved!
Ereplaceement had everything I needed and the parts arrived quickly!!

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Blower

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Socket set

Just tune up parts to keep the blower running smoothly

Just replaced the old spark plug and filter - very simple to do.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Blower

Parts Used:

Switch - 512698001

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Screwdriver

Stupid owner stepped on the shutoff switch

I was concerned that the shutoff switch that I broke was not going to be available any longer. I had started working on the McGyver plan of adding a toggle switch to replace the broken slider switch. Check the ereplacementspart site and was surprised to find the switch was still available. Usually, in cases like this the whole assembly is offered which makes it cost prohibitive.

Switch was easily replaced by separating the handle halves and unscrewing the broken slider with the new slider.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Blower

Parts Used:

Repair Difficulty:

Easy

Time Spent Repairing:

Less than 15 minutes

Tools Used:

Pliers, Socket set, None

HUSQUVARNA 150 BT Blower would not start.

1. Replaced spark plug.
2. Fished out gas line filter with a piece of wire and replaced it.
3.Replaced air filter
4. Drained 2 cycle fuel from tankand added fresh fuel.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Blower

Parts Used:

Cover - 502844201

Air Filter Holder - 502844902

Cable - 512699701

Repair Difficulty:

Easy

Time Spent Repairing:

15-30 minutes

Tools Used:

Screwdriver, Pliers

Throttle cable was broken, plus had lost air filter and covers

Removed old cable from carb and trigger, then pulled it out of the sleeve. Reversed this process to install the cable.
Installed the air filter housing, filter and cable.

Did you find this story helpful?

Thanks for voting and helping fellow customers!

Tool Type:

Blower

Parts Used: