Air Filter 597797901
Part Number: 597797901
Order within the next 8 hours
and your part ships today!
and your part ships today!
*This part replaces obsolete part #: 5451121-01 and 545112101.
Product Information
Description:
This is a genuine Husqvarna replacement part, it is sold individually. The purpose of this filter is to keep dirt and other small particles from entering the carburetor and engine and causing internal engine damage. Once this type of filter gets clogged or dirty it should be changed (Not Cleaned). This is to prevent restricted air flow and foreign matter from entering the engine. |
Frequently Purchased With
Compatibility
the 21 compatible machines
This part is compatible with the following machines:
Husqvarna
125B 28cc 2-Stroke 170-MPH Gas-Powered Handheld Gas Blower
125BVX (2008-01) Handheld Leaf Blower
125BVX (2007-05) Handheld Leaf Blower
125BVX (2011-04) Handheld Leaf Blower
125BVX (2010-06) 952711902, Handheld Leaf Blower
125BVX (2008-01) Handheld Leaf Blower
125BVX (2007-05) Handheld Leaf Blower
125BVX (2011-04) Handheld Leaf Blower
125BVX (2010-06) 952711902, Handheld Leaf Blower
125BX (2008-06) Handheld Leaf Blower
125BX (2010-06) Handheld Leaf Blower
125BVX (2001-04) 28cc 2-Cycle Gas Powered 170 Mph Blower/Vac With Smart Start
125BVX (2008-06) 28cc 2-Cycle Gas Powered 170 Mph Blower/Vac With Smart Start
125BX (2010-06) Handheld Leaf Blower
125BVX (2001-04) 28cc 2-Cycle Gas Powered 170 Mph Blower/Vac With Smart Start
125BVX (2008-06) 28cc 2-Cycle Gas Powered 170 Mph Blower/Vac With Smart Start
Craftsman
Jonsered
Products Compatibility
This item works with the following types of products:
- • Blower
Questions & Answers for Air Filter
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
1 of 1 people found this instruction helpful
Tool Type:
Blower
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Hand power only
Engine chugging
I keep extra air filters at the house, but this machine, I had run out. I cleaned the filter with choke cleaner and it operated okay. I ordered two new air filters so as not to have trouble again. All you need to do is remove the air filter cover and remove the old air filter, then replace it with the new one. Then replace the cover.
This company has the best prices of most companies and original factory specs. The service they provided to me was some of the best services in quite some time. I will be ordering for my other equipment, air filters and plugs too.
Thank you so much for the great job!!!
This company has the best prices of most companies and original factory specs. The service they provided to me was some of the best services in quite some time. I will be ordering for my other equipment, air filters and plugs too.
Thank you so much for the great job!!!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Blower
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Socket set, Nutdriver
Replacing fuel filter and air filter
In the course of replacing the filters (easy repair) I noticed dirt and debris in and around the carburetor. I decided to remove the blower housing to gain access to the carburetor. I carefully removed the carburetor making sure not to damage the gaskets.
Using a carburetor cleaner I sprayed the unit and it easily removed the gunk and dirt that had built up. The cleaned carburetor with new filters and spark-plug work great. The motor is running with more power.
If you do this repair there are some great videos on YouTube that I found extremely helpful.
Using a carburetor cleaner I sprayed the unit and it easily removed the gunk and dirt that had built up. The cleaned carburetor with new filters and spark-plug work great. The motor is running with more power.
If you do this repair there are some great videos on YouTube that I found extremely helpful.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Blower
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers, Nutdriver, 21 spline carburetor adjusting tool
Blower hard to start and wouldn't idle unless choke was on. Apparent effect of using old gas.
Used a nut driver to remove the old carburetor assembly. Removed and re-attached fuel lines to the new carburetor in the same way they were previously attached. Installed the new carburetor assembly with new gaskets. Removed and re-installed the in-tank fuel filter and installed the new air filter. The blower started right up and the Hi and Low speed needles and idle speed were adjusted using a 21 spline carburetor adjusting tool and phillips screw driver. The parts arrived earlier than expected and were exactly what I needed to get my blower going. I'll use eReplacementParts again. Thanks.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Blower
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Fingers
Filter dirty
Removed filer cover
Took out old filter keeping orientation of filter.
Placed new filter using orientation from old one
Replaced cover and hand tightened cover screw
Took out old filter keeping orientation of filter.
Placed new filter using orientation from old one
Replaced cover and hand tightened cover screw
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Blower
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Filter needed replacement to ensure proper running of machine
Removed cover plate
removed soiled filter
replaced w/ new filter
reattached cover plate
removed soiled filter
replaced w/ new filter
reattached cover plate
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Blower
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set
wont run
replaced carb
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Blower
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Power Drill, Socket set
Engine wouldn't run without choke on, and could not advance the throttle
removed starter and blower case on that side. removed air filter and filter housing. pulled carburetor and gaskets. then just put new carb and gaskets, and fuel lines in place and tightened down. replaced outer case and starter mechanism. No special instructions other than it's easier to put the fuel lines back on the new carb before you slide it onto the bolts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Blower
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set
No spark
Removed starter rope housing and housing below it, removed wires from old coil , put new coil in place, used business card to set clearance between coil and flywheel, put wires in place, removed business card, replaced housings. Put plug wire on, pulled and she fired up. Air filter removed knob then housing then filter put in new filter, replaced housing and knob.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Blower
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Socket set
Broke purge valve
Removed the cover , disconnected the valve and replaced it with the new one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Blower
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Nutdriver
Primer bulb split due to heat in storage
Removed air filter and bulb from unit and reinstalled the new one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
show more
Reviews
14 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
14
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
- 2
Thanks fit perfect
Working great
Guest -
November 7, 2022
Verified Purchase
easy repair
works great ,hard to find part at other stores
Guest -
March 12, 2022
Verified Purchase
Fast and easy
Just what I needed...
james -
February 18, 2022
Verified Purchase
Fast easy service
Great parts at a fair price
Guest -
November 5, 2021
Verified Purchase
worked just like it suppose to
Made the motor run better
Guest -
September 30, 2021
Verified Purchase
Easy fix
Easy fix & replacement. Parts arrived on time and order was correct.
Corey -
August 16, 2021
Verified Purchase
Exact replacement
Fit like a glove on my Husqvarna blower
RM -
May 15, 2020
Verified Purchase
Exact fit
Exact fit. Blower working used while installing new carb and fuel lines
Frederick -
January 2, 2020
Verified Purchase
Repair
Great product
Peter -
September 11, 2019
Verified Purchase
Easy to order easy to replace
My blower was waiting for this
Guest -
May 24, 2019
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
- 2