*This part replaces obsolete part #: 4460652N20.
Manufacturer: Tanaka, Metabo HPT (Hitachi) |
Product Number: 6690365 |
Classification: Part |
Weight: 0.01 lbs. |
Shipping: Ships Worldwide |
This replacement foam air cleaner element is sourced directly from original equipment manufacturer. It is a genuine item commonly used with Tanaka handheld lawn and garden equipment. It is helps to filter out dust and debris from contaminating the engine. This foam filter is sold individually. Please note, the filter cover and the base are both sold separately. Replacing this element is a simple task that does not require any tools. • Remove the cover knob • Take off the cover and replace the filter element • Reassemble and test the equipment |
This part is compatible with the following machines:
TPS-250PN Extended Reach Pole Saw
TPE-250PF Portable Edger
TPE-260PF Portable Edger
TPH-250PF Articulating Pole Hedge Trimmer
TPH-250PF Articulating Pole Hedge Trimmer
TPH-260PF Pole Hedge Trimmer
TPH-260PF Pole Hedge Trimmer
PF-2500 Utility / Scooter Engine
PF-3300 Utility / Scooter Engine
TC-2501 Utility / Scooter Engine
TBC-250PF Low Emission Grass Trimmer / Brush Cutter
TBC-250PFD Low Emission Grass Trimmer / Brush Cutter
TBC-260PF Grass Trimmer
TBC-260PF Grass Trimmer
TBC-260PFL Grass Trimmer
TBC-260PFL Grass Trimmer
TBC-280 Grass Trimmer
TBC-280 Grass Trimmer
TBC-280PF Grass Trimmer
TPK-470GS 47cc Paveracer Kart
Moby X (24cc) Bladez PowerBoard W/PureFire Engine
Moby X (25cc) Bladez PowerBoard
PB-SE833 Bladez Moby 33cc PowerBoard
TBC-250SF Smart Fit - Multi Task Tool
TBC-260SF Smart Fit - Multi Task Tool
TBC-340 Grass Trimmer / Brush Cutter
TBC-340D Grass Trimmer / Brush Cutter
TBC-340PF Grass Trimmer / Brush Cutter
TBC-340PFD Grass Trimmer / Brush Cutter
TED-270PFR Portable Gas Drill W/Reverse
PB-SE801 (Moby-X25PF) BladeZ 24.5cc Gas
TIA-350S 32cc 1.6 H.P. One-man Power Auger
TIA-350PFS 32cc 1.6 H.P. One-man Power Auger
PK-SE2033 32cc Gas Powerkart
PB-SE801 (Moby-X25) BladeZ 24cc PowerBoard w/PureFire Engine
TED-270PFDH Dual Handle Bulb Planting Drill
TPS-260PF Extended Reach Pole Saw
TPS-260PF Extended Reach Pole Saw
Put new filter in.
Remove filter cover with finger screw.
Remove old filter.
Clean out surrounding area from dirt and dust.
Replace new filter.
Replace filter cover and tighten finger screw.
1. opened gas tank removed gas line, removed old filter
2. pushed on the new filter
3. removed cover, removed cleaner element
4. placed new element
Pole Saw:
1. opened gas tank removed gas line, removed old filter
2. pushed on the new filter
3. added new cover.
https://www.youtube.com/watch?v=RfzzTilqwo0
I replaced the primer bulb. I then removed the heat insulator and replace the worn manifold gasket, then reinstalled the heat insulator. I then installed the rebuilt carburetor with the screws, replaced the fuel lines. Then put in the new air filter, than attached the filter cover.
- 1
- 1
Manufacturer: Tanaka, Metabo HPT (Hitachi) |
Product Number: 6690365 |
Classification: Part |
Weight: 0.01 lbs. |
Shipping: Ships Worldwide |