Agitator Assembly 31014904000
Part Number: 31014904000
Leaves our warehouse within
7 - 12 business days
7 - 12 business days
*This part replaces obsolete part #: 31014104000, 031014-002-000, 031014-001-000, 031014-104-000, 015126-000-000 and 031014-004-000.
Product Information
Description:
| The 031014-104-000 Agitator is sold individually. The Agitator Assembly (Or Blade Assembly) is the part of the blender that chops, blends or mixes the product that is put into the blender jar. After time the blades will become dull or break or the spline that is attached to the shaft may wear out. When replacing the Agitator it is advisable to inspect the Sealing Ring, which is in between the agitator and the jar for cracks and if it has been compressed too much, which will cause it to leak from the bottom. |
Frequently Purchased With
Compatibility
the 134 compatible machines
This part is compatible with the following machines:
Sunbeam
Oster
4093-8 Classic Beehive Blender
4094 Classic Beehive Blender
4096 Beehive Blender
4119-022 Blender
4122 Beehive Blender
4123 Beehive Blender
4125 Kitchen Center Blender
4126 Contemporary Blender
4127 Contemporary Blender
4128 Contemporary Blender
4134 Contemporary Blender
4204 2 Speed Glass Jar Stainless Steel Blender
4242 2 Speed Blender
4258-022 2 Speed Blender
4270-015 Blender
6606 Blender
6607 Blender
6608 14 Speed Blender
6628-009 Blender
6628 Contemporary Blender
6684 Contemporary Blender
6629 10 Speed Blender
6630 Cube Blender
6631 Cube Blender
6632 Cube Blender
6633 Cube Blender
6634 Cube Blender
6635 Cube Blender
6636 Cube Blender
6640 Cube Blender
6641 Cube Blender
6642 Cube Blender
6643 Cube Blender
6644 Cube Blender
6645 Cube Blender
6646 Cube Blender
6647 Cube Blender
6648 Contemporary Blender
6665 Contemporary Blender
6678 Contemporary Blender
6651 16 Speed Blender
6652 Slope Mechanical Switch Blender
6653 Slope Mechanical Switch Blender
6654 Slope Mechanical Switch Blender
6657 Slope Mechanical Switch Blender
6658 Slope Mechanical Switch Blender
6655 Slope Electronic Blender
6656 Contemporary Blender
6679 Contemporary Blender
6662 Slope Blender
6663 Slope Blender
6664 Slope Blender
6667 Slope Blender
6668 Slope Blender
6680 Contemporary Blender
6681 Contemporary Blender
6686 Blender
6687 Blender
6688 Blender
6689 Blender
6692 Blender
6696 Blender
6694-015 14 Speed Blender
6697-022 14 Speed Blender
6698-015 12 Speed Blender
4094 Classic Beehive Blender
4096 Beehive Blender
4119-022 Blender
4122 Beehive Blender
4123 Beehive Blender
4125 Kitchen Center Blender
4126 Contemporary Blender
4127 Contemporary Blender
4128 Contemporary Blender
4134 Contemporary Blender
4204 2 Speed Glass Jar Stainless Steel Blender
4242 2 Speed Blender
4258-022 2 Speed Blender
4270-015 Blender
6606 Blender
6607 Blender
6608 14 Speed Blender
6628-009 Blender
6628 Contemporary Blender
6684 Contemporary Blender
6629 10 Speed Blender
6630 Cube Blender
6631 Cube Blender
6632 Cube Blender
6633 Cube Blender
6634 Cube Blender
6635 Cube Blender
6636 Cube Blender
6640 Cube Blender
6641 Cube Blender
6642 Cube Blender
6643 Cube Blender
6644 Cube Blender
6645 Cube Blender
6646 Cube Blender
6647 Cube Blender
6648 Contemporary Blender
6665 Contemporary Blender
6678 Contemporary Blender
6651 16 Speed Blender
6652 Slope Mechanical Switch Blender
6653 Slope Mechanical Switch Blender
6654 Slope Mechanical Switch Blender
6657 Slope Mechanical Switch Blender
6658 Slope Mechanical Switch Blender
6655 Slope Electronic Blender
6656 Contemporary Blender
6679 Contemporary Blender
6662 Slope Blender
6663 Slope Blender
6664 Slope Blender
6667 Slope Blender
6668 Slope Blender
6680 Contemporary Blender
6681 Contemporary Blender
6686 Blender
6687 Blender
6688 Blender
6689 Blender
6692 Blender
6696 Blender
6694-015 14 Speed Blender
6697-022 14 Speed Blender
6698-015 12 Speed Blender
6748-015 12 Speed Blender
6751 12 Speed Blender
6752 12 Speed Blender
6753 14 Speed Blender
6760 12 Speed Blender
6763 12 Speed Nascar Blender
6765 12 Speed NASCAR Jeff Gordon Blender
6791-015 12 Speed Blender
6792-027 10 Speed Glass Jar Blender
6793-027 10 Speed Blender
6810-126 16 Speed Blender
6811 12 Speed Glass Jar Blender
6812 16 Speed Blender
6813 16 Speed Blender
6814 16 Speed Blender
6815 12 Speed Blender
6816 10 Speed Blender
6817-026 16 Speed Blender
6819 14 Speed Blender
6820-022 12 Speed Blender
6824 16 Speed Thermal Blue Chill Jar Blender
6835-022 14 Speed Thermal Jar Cube Blender
6854 14 Speed Blender
6855 14 Speed Blender
6870 12 Speed Blender
6873 14 Speed w/ Food Processor Blender
6874-022 12 Speed Blender
6875-015 12 Speed Blender
6672 Cube Blender
6673 Cube Blender
6674 Cube Blender
6675 Cube Blender
6676 Cube Blender
6677 Cube Blender
BPST02-B 2 Speed Blender
6836-075 12 Speed Blender
6864 16 Speed Blender
6884 14 Speed Blender
BPHT02-B00-026 2 Speed Blender
6837 16 Speed Blender
6891 18 Speed Blender
6894 18 Speed Blender
6896 18 Speed Blender
BCCG08-C 8 Speed Blender
BLSTDG-B 6 Speed Blender
BCBG08-C 8-Speed Blender
BLSTCC-BFP 12-Speed Blender
BLSTMG-W Blender
BLSTBH-SR 500 Watt Blender
BLSTTG-PCP-000 Party Jar Blender
006878-042 Blender
6843 Blender
5000-25 Blender
6800 Blender
BLSTSS-PZO Blender
6872 Blender
6803 Core 14 Speed Blender
006830-000-000 10-Speed Blender
006694-015-RNP Blender
6847 Blender
BLSTAS-Z00-000 Blender
6878 Blender
6650 Blender
006845-000-NP0 Blender
BPCT02 Blender
6751 12 Speed Blender
6752 12 Speed Blender
6753 14 Speed Blender
6760 12 Speed Blender
6763 12 Speed Nascar Blender
6765 12 Speed NASCAR Jeff Gordon Blender
6791-015 12 Speed Blender
6792-027 10 Speed Glass Jar Blender
6793-027 10 Speed Blender
6810-126 16 Speed Blender
6811 12 Speed Glass Jar Blender
6812 16 Speed Blender
6813 16 Speed Blender
6814 16 Speed Blender
6815 12 Speed Blender
6816 10 Speed Blender
6817-026 16 Speed Blender
6819 14 Speed Blender
6820-022 12 Speed Blender
6824 16 Speed Thermal Blue Chill Jar Blender
6835-022 14 Speed Thermal Jar Cube Blender
6854 14 Speed Blender
6855 14 Speed Blender
6870 12 Speed Blender
6873 14 Speed w/ Food Processor Blender
6874-022 12 Speed Blender
6875-015 12 Speed Blender
6672 Cube Blender
6673 Cube Blender
6674 Cube Blender
6675 Cube Blender
6676 Cube Blender
6677 Cube Blender
BPST02-B 2 Speed Blender
6836-075 12 Speed Blender
6864 16 Speed Blender
6884 14 Speed Blender
BPHT02-B00-026 2 Speed Blender
6837 16 Speed Blender
6891 18 Speed Blender
6894 18 Speed Blender
6896 18 Speed Blender
BCCG08-C 8 Speed Blender
BLSTDG-B 6 Speed Blender
BCBG08-C 8-Speed Blender
BLSTCC-BFP 12-Speed Blender
BLSTMG-W Blender
BLSTBH-SR 500 Watt Blender
BLSTTG-PCP-000 Party Jar Blender
006878-042 Blender
6843 Blender
5000-25 Blender
6800 Blender
BLSTSS-PZO Blender
6872 Blender
6803 Core 14 Speed Blender
006830-000-000 10-Speed Blender
006694-015-RNP Blender
6847 Blender
BLSTAS-Z00-000 Blender
6878 Blender
6650 Blender
006845-000-NP0 Blender
BPCT02 Blender
Products Compatibility
This item works with the following types of products:
- • Blender
- • Food Processor
Repair Guides
![]()
Watch the Repair Video for
Agitator Assembly
Articles:
|
Step-by-step instructions for removing and installing the blade assembly (agitator) on your Oster blender....
October 10, 2017
|
Questions & Answers for Agitator Assembly
Not finding a replacement blade assembly/agitator. Is one available?
Robert
for model number 6844
asked on 2022-03-28
Hello Robert, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part Number:31014904000. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
eReplacementParts Team March 28, 2022
Repair Instructions: Submitted by Customers Like You
21 of 24 people found this instruction helpful
Tool Type:
Blender
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Oster blender agitator /blade was heavily worn.
Replaced the hand removable screw-on blade and seal ring on an Oster blender. One has to remove the blade and sealing gasket to clean anyway, so there were no tools involved.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
15 of 18 people found this instruction helpful
Tool Type:
Blender
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, A pipe wrench to remove the base that was stuck.
Existing agitator assembly leaked.
Disassembled Container bottom and replaced all parts. I noticed that the old agitator assembly appeared to have worn bearing seals and wobbled, probably causing the leaking. I was a little worried because the replacement part numbers were off by a digit or two, but the replacement parts were the same size and fit perfectly. I reassembled and the blender no longer leaked.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
10 of 11 people found this instruction helpful
Tool Type:
Blender
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Pliers
The assembly was worn out. Blades dull and the drive was slipping.
Disassembled the base of the blender jar and replaced the old assembly with the new one. One snag: it vibrated badly at first. When I looked at the blades one was bent out too far. Straightened it with pliers and now it works fine.
The odd thing is, I remember when I got the blender I had exactly the same problem. I had to straighten one of the blades in the brand new blender.
The odd thing is, I remember when I got the blender I had exactly the same problem. I had to straighten one of the blades in the brand new blender.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
8 of 9 people found this instruction helpful
Tool Type:
Blender
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Motor worked but blades didn't turn
Replaced blades and seal, which was old but not damaged. Surprised and pleased that I could find the right parts for a blender that is probably 25-30 years old.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
5 of 6 people found this instruction helpful
Tool Type:
Blender
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Blender was leaking and blades were dull
Remove the old bottom, blades and seal
Place the new blades in the container
Put the seal on top of the blade base
Thread the assembly onto the jar
Place the new blades in the container
Put the seal on top of the blade base
Thread the assembly onto the jar
Did you find this story helpful?
Thanks for voting and helping fellow customers!
5 of 6 people found this instruction helpful
Tool Type:
Blender
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, no tool needed
Leakage & smoke from chopper blades
Installed new chopper blades and seal. No more smoke. It works great.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
4 of 5 people found this instruction helpful
Tool Type:
Blender
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
The blender was leaking
Removed the old parts and put in the new ones. Pretty basic
works perfectly and doesn't leak anymore.
works perfectly and doesn't leak anymore.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Blender
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Blender leaking
Removed old assembly, screwed in new assembly
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 3 people found this instruction helpful
Tool Type:
Blender
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Agitator assy. was worn and it was making a loud noise
Unscrewed the old agitator assy and seal. Put new agitator and seal together and put in..It works great and saves me from buying a new one. Thank You
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 3 people found this instruction helpful
Tool Type:
Blender
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Blender agitator assembly
Took out the old part and install the new one, it is very easy to do just using my hands.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
show more
Reviews
41 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
38
4 stars
2
3 stars
1
2 stars
0
1 stars
0
< PREV
- 1
- 2
- 3
Fits works
Fair price but back ordered ok arrived all good
Vince -
May 1, 2023
Verified Purchase
Excellent service, very professional
Part worked as expected fast delivery. Would use the company again.
Guest -
February 1, 2023
Verified Purchase
Amazing Resource!
I was amazed that I could get a replacement part for a blender from the early 1970's and that it fit perfectly. The blender now works like new! The guide on your website to determine the problem with the appliance confirmed my choice of this replacement part, the blade or agitator assembly. Thank you for providing this service! It saved me from throwing away a blender that just needed a part.
Guest -
December 28, 2022
Verified Purchase
Great part, functions well
Great part, functions well
Guest -
December 24, 2022
Verified Purchase
Proper part
My part arrived as promised. It was a back order so I had to wait. However you were very communicative about the status of my order. I appreciate that.
Guest -
August 23, 2022
Verified Purchase
part
received correct part.
Guest -
June 8, 2022
Verified Purchase
My blender works again!!
The agitator fit and works perfectly!! My blender is 51 years old and I am so glad I can still use it!! Thanks!!
Guest -
June 7, 2022
Verified Purchase
Blender is back in action
I really needed it thanks
iGlobal -
April 21, 2022
Verified Purchase
Agitator, great Customer Service, excellent
Due to the supply chain delays that Covid has caused, we were advised from the beginning that there would be an extended delay in the agitator's arrival and there was. However, I was surprised and pleased that throughout the wait, we received regular advisories that we were not forgotten! Then, shortly before the agitator actually arrived, we were e-mailed that it was on it way. Excellent communication from REPAIR PARTS HOME. Thank you
Guest -
January 21, 2022
Verified Purchase
Just like the original
I needed a replacement blade assembly for my trusty Oster blender and I got exactly what I ordered.
Guest -
January 20, 2022
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
- 2
- 3
Product Information
Repair Guides
![]()
Watch the Repair Video for
Agitator Assembly
Articles:
|
Step-by-step instructions for removing and installing the blade assembly (agitator) on your Oster blender....
October 10, 2017
|
