Easy
Less than 15 minutes
It is an identical replacement for the part that was installed on a new tool. The adjusting slide allows a user to change the direction in which the chuck rotates. Check the diagrams for your specific model to ensure the correct repair procedure. This high-quality adjusting slide is made of durable plastic and is sold as an individual item. It is supplied by the original manufacturer for Bosch drill drivers. A screwdriver will be needed to take apart and reassemble the housing.
Adjusting Slide 2601099114
OEM part for: Bosch
Part Number: 2601099114
$3.99
In Stock
Order within the next 9 hours and your part ships today! 
Compatibility
This part will fit the following 8 machines
Bosch
32614 (0601916460) Cordless Drill View Diagrams & Manuals
32614 (0601916470) Cordless Drill View Diagrams & Manuals
32618 (0601916360) Cordless Drill View Diagrams & Manuals
32618 (0601916370) Cordless Drill View Diagrams & Manuals
32609 (0601916660) Drill Driver View Diagrams & Manuals
32609 (0601916670) Drill Driver View Diagrams & Manuals
32612 (0601916560) Drill Driver View Diagrams & Manuals
32612 (0601916570) Drill Driver View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Cordless Drill Parts
- Drill Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
0
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
all good
You had the part, It took
while to get here but its all good
Guest -
October 8, 2020
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Adjusting Slide
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
reversing knob on Bosch 14 v. was broken
George - December 13, 2018
Tool Type
Cordless Drill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, all I used was a small star drive
Parts Used
Took the screw gun apart and changed the reverser knob. eReplacements sent the knob quickly. Looked like OEM. Shipping cost double the knob.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
First no reverse, then would not work in either direction.
Brian - November 12, 2017
Tool Type
Cordless Drill
Difficulty
Easy
Time
15-30 minutes
Tools Used
, Torx driver
Parts Used
1. Removed battery
2. Removed all torx screws holding two sides of drill case together
3. Pulled one side of drill off starting at rear
4. Removed old direction slider with broken tabs.
5. Cleaned inside if case while it was open
6. Inserted new slider placing switch lever between two tabs on slider
7. Temporarily put battery in and tested forward and reverse.
8. Removed battery, put other half of case back on.
9. Installed and tightened all screws.
10. Drill now works in both directions - done
2. Removed all torx screws holding two sides of drill case together
3. Pulled one side of drill off starting at rear
4. Removed old direction slider with broken tabs.
5. Cleaned inside if case while it was open
6. Inserted new slider placing switch lever between two tabs on slider
7. Temporarily put battery in and tested forward and reverse.
8. Removed battery, put other half of case back on.
9. Installed and tightened all screws.
10. Drill now works in both directions - done
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reversing switch did not slide properly in one direction
Ken - July 5, 2016
Tool Type
Cordless Drill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
I split the tool in half by removing all of the screws that hold it together and gently pulled in apart. I then slipped the old part out, put the new one in and re-assembled the tool. I do most of my own tool repair, but should be no problem for anyone with moderate repair knowledge.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Forward / Reverse slide broke
Stanley - June 12, 2016
Tool Type
Cordless Drill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
Remove all screws holding two halves together. Carefully separate, Remove broken slide, replace with new slide. Screw two halves back together. Done
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
