*This part replaces obsolete part #: 122415-2, 152490-4 and 273485-5.
Product Information
Description:
This is a manufacturer approved replacement part designed for Makita grinders/sanders. This is the side handle 36 that provides a safe and stable grip for your tool. It is made out of plastic and metal. It is sold individually. No tools are needed to replace this grip. Simply screw in the grip/handle into threaded opening on the housing. |
Frequently Purchased With
Compatibility
the 60 compatible machines
This part is compatible with the following machines:
Makita
9227C Sander
BO6040 Sander
N9514B Grinder
9030 Belt Sander
9031 Belt Sander
9501B Grinder
9503BH Grinder
9505BH Grinder
6000LR Drill
9523NBH Angle Grinder
9564CV Angle Grinder
9558NB Angle Grinder
9558PB Angle Grinder
9557NB Angle Grinder
9557PB Angle Grinder
9554NB Angle Grinder
9553NB Angle Grinder
DA3010F Angle Drill
N9501BZ Disc Grinder
9227CY Sander / Polisher
9227CY Sander / Polisher
9566PC 6" SJS Cutoff / Angle Grinder
9565PC 5" SJS Angle Grinder
9564PC 4-1/2" SJS Angle Grinder
BDA350 18V LXT Lithium-Ion Cordless 3/8" Angle Drill
BDA350 18V LXT Lithium-Ion Cordless 3/8" Angle Drill
BDA340 18V Angle Drill
BGA452Z 18V LXT Lithium-Ion Cordless 4-1/2" Cut-Off/Angle Grinder
BDA350Z 18V LXT Lithium-Ion Cordless 3/8" Angle Drill
BDA350Z 18V LXT Lithium-Ion Cordless 3/8" Angle Drill
BO6040 Sander
N9514B Grinder
9030 Belt Sander
9031 Belt Sander
9501B Grinder
9503BH Grinder
9505BH Grinder
6000LR Drill
9523NBH Angle Grinder
9564CV Angle Grinder
9558NB Angle Grinder
9558PB Angle Grinder
9557NB Angle Grinder
9557PB Angle Grinder
9554NB Angle Grinder
9553NB Angle Grinder
DA3010F Angle Drill
N9501BZ Disc Grinder
9227CY Sander / Polisher
9227CY Sander / Polisher
9566PC 6" SJS Cutoff / Angle Grinder
9565PC 5" SJS Angle Grinder
9564PC 4-1/2" SJS Angle Grinder
BDA350 18V LXT Lithium-Ion Cordless 3/8" Angle Drill
BDA350 18V LXT Lithium-Ion Cordless 3/8" Angle Drill
BDA340 18V Angle Drill
BGA452Z 18V LXT Lithium-Ion Cordless 4-1/2" Cut-Off/Angle Grinder
BDA350Z 18V LXT Lithium-Ion Cordless 3/8" Angle Drill
BDA350Z 18V LXT Lithium-Ion Cordless 3/8" Angle Drill
RT0700CX3 1-1/4 HP Compact Router Kit
RT0700C 1-1/4 HP Compact Router
RT0701C 1-1/4 HP Compact Router
9237C 7" Polisher
XAG01 18V LXT Lithium-Ion Cordless Grinder Kit
XAG01Z 18V LXT Lithium-Ion 4-1/2" Cut-Off/Angle Grinder
2703 (Type 2) Saw
6807 (Type 1) Screwdriver
9227C (Type 2) Sander
9227C (Type 3) Sander
9227CZ (Type 3) Sander
9237CX3 Sander
9504B Grinder
9525NBX Grinder
9527PBK (Type 1) Grinder
9527PBK (Type 2) Grinder
9527PBK (Type 3) Grinder
9527PB (Type 1) Grinder
9527PB (Type 2) Grinder
9527PB (Type 3) Grinder
9528PB (Type 1) Grinder
9528PB (Type 2) Grinder
9528PB (Type 3) Grinder
9557NB2 Grinder
9565PCV Grinder
BO6010 Sander
N9501B Grinder
RT0701CX3 Misc
XCS02T1 Grinder
XCS02ZK Grinder
RT0700C 1-1/4 HP Compact Router
RT0701C 1-1/4 HP Compact Router
9237C 7" Polisher
XAG01 18V LXT Lithium-Ion Cordless Grinder Kit
XAG01Z 18V LXT Lithium-Ion 4-1/2" Cut-Off/Angle Grinder
2703 (Type 2) Saw
6807 (Type 1) Screwdriver
9227C (Type 2) Sander
9227C (Type 3) Sander
9227CZ (Type 3) Sander
9237CX3 Sander
9504B Grinder
9525NBX Grinder
9527PBK (Type 1) Grinder
9527PBK (Type 2) Grinder
9527PBK (Type 3) Grinder
9527PB (Type 1) Grinder
9527PB (Type 2) Grinder
9527PB (Type 3) Grinder
9528PB (Type 1) Grinder
9528PB (Type 2) Grinder
9528PB (Type 3) Grinder
9557NB2 Grinder
9565PCV Grinder
BO6010 Sander
N9501B Grinder
RT0701CX3 Misc
XCS02T1 Grinder
XCS02ZK Grinder
Products Compatibility
This item works with the following types of products:
- • Cordless Drill
- • Drill
- • Grinder
- • Polisher
- • Router
- • Sander
Questions & Answers for Handle Grip
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
1 of 1 people found this instruction helpful
Tool Type:
Grinder
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Brass drift and small ballpein hammer
Bad bearings, bad brushes, missing handle.
1. Separated the case halves.
2. Removed the motor armature.
3. Removed the bearings from the armature.
4.Replaced the bearings on the armature.
5. Cleaned the brush housing by removing the brushes and using compressed air cleaned the brush housing and replaced the brushes.
6. Cleaned the inside of the housings and reassembled them.
7. Installed the missing grip.
8 Installed a new grind disk and tested.
9. Worked like a new one and the brushes did not spark a lot nor did the bearings vibrate and squeal.
2. Removed the motor armature.
3. Removed the bearings from the armature.
4.Replaced the bearings on the armature.
5. Cleaned the brush housing by removing the brushes and using compressed air cleaned the brush housing and replaced the brushes.
6. Cleaned the inside of the housings and reassembled them.
7. Installed the missing grip.
8 Installed a new grind disk and tested.
9. Worked like a new one and the brushes did not spark a lot nor did the bearings vibrate and squeal.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Polisher
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
Brushes on buffer were worn out, and handle broke.
I just removed 2 plastic screws that hold the brushes in (extremely easy). Unscrewed old handle and screwed new handle on. Very easy fix.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Grinder
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, just screwed on by hand
handle grip was lost
ordered the handle grip it was perfect.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Electric Drill
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
No handle
Screwed handle on yo angle drill. Attaching handle easy. Finding part on your website even easier. Service and follow up very impressive.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Grinder
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Handle missing
Screwed in after previous purchased handle did not fit.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Sander
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Wrench Set, Hammer and drift pin.
Needle bearing fried.
Installed new bearing inside front belt sander roller. Used an appropriate sized socket to gently tap the bearing in place. At this point the roller/bearing assembly was bolted to the front of the machine as required. Then installed the new sanding belt, job complete.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Grinder
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
I needed a replacement handle and had lost the wrenches needed to change discs easily.
These parts were direct replacements and worked as designed. Thanks
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Grinder
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Rear cover cracked and handle missing on yard sale cutoff grinder.....OEM parts fixed like new!
Removed cracked cover, disconnected power cord & reassembled with new cover.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Grinder
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Wrench Set
Grinder was incomplete..... bought at a garage sale and had no extra parts..... no original part either.
Using the lock nut wrench made it simple to remove the grinding nut, installed the adapter and the grip 36 (the grip gave me the extra "control" needed to safely use the grinder)..... the adapter made the attachment of the needed wire brushes possible. From that point on, the grinder worked as if it was brand new for a fraction of the original price!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
0 of 1 people found this instruction helpful
Tool Type:
Router
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Adjustable Wrench
Replace missing base from BoXZY CNC Milling Head to make it a usable router
Got this to replace the missing fixed base from the BoXZY CNC Milling Head (a Makita RT0701C) and turn it into a usable router.
Attach base protector with four M4x10 countersunk screws. Attach spur gear on the thumbscrew and cam lock piece they sent with the BoXZY. Attach the cam lock to base along with the cam plate they also sent with the BoXZY. Slide on to router and lock into place...
Save the Grip 36 for use with the plunge base.
Attach base protector with four M4x10 countersunk screws. Attach spur gear on the thumbscrew and cam lock piece they sent with the BoXZY. Attach the cam lock to base along with the cam plate they also sent with the BoXZY. Slide on to router and lock into place...
Save the Grip 36 for use with the plunge base.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
show more
Reviews
11 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
11
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
- 2
Extremely easy
Small piece. Easy to find and delivered quickly.
Guest -
April 24, 2023
Verified Purchase
Works great
It fit as expected. Works great.
Guest -
January 18, 2023
Verified Purchase
Easy and fast.
Lost the grip a few years ago and decided it was time to get it replaced.
Guest -
December 10, 2022
Verified Purchase
threads wrong to small need larger threads
part was right but threads to small meed larger size threads
Guest -
November 30, 2022
Verified Purchase
Where else can you find these hard-to-find parts?
All was completed quickly and efficiently. This part was impossible to find anywhere else. Now I just come to ereplacementparts.com first. Why waste time?
Juan -
January 12, 2022
Verified Purchase
Exactly what was needed
Exactly what was needed
Guest -
June 8, 2021
Verified Purchase
>excellent service
Solved my problem at minimum cost
Guest -
September 15, 2020
Verified Purchase
Just what I was looking for!
The replacement handle works great! Was very happy with the speed of the shipping and the entire ordering process. Will use you again if need arises.
Guest -
June 4, 2020
Verified Purchase
good company to work with
easy purchase online
curt -
October 15, 2019
Verified Purchase
Great vendor. Fast service. Good parts
The service was fast. Csme in on time ti Fox my grinder. The parts fit just like new. I highly recommend eReplacementparts.
Guest -
July 5, 2019
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
- 2