Easy
Less than 15 minutes
This is an authentic component which is supplied by the original equipment manufacturer for use with Ridgid random orbit sanders. The output sleeve and bearing assembly is a special part which helps to engage the backing pad. Unfortunately, over time it may begin to fail eventually requiring a replacement to ensure your equipment functions properly. Refer to the appropriate diagrams for your model when performing this repair. Keep in mind this high-quality output sleeve and bearing assembly is sold as an individual item.
Output Sleeve And Bearing Asse 301474001
OEM part for: Ridgid
Part Number: 301474001
$23.42
In Stock
Order within the next 3 hours and your part ships today! 
Jump To:
Frequently Purchased Together ?
Compatibility
This item works with the following types of products:
- Sander Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
3
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Exact fit
Fixed my sander. Parts were an exact fit and easy to find in the diagram.
Guest -
February 13, 2023
Verified Purchase
Great part.
The part made my sander work like new.
Guest -
May 21, 2022
Verified Purchase
repaired my sander
My orbital sander is working like new again.
Guest -
November 23, 2019
Verified Purchase
Rigid sander worn bearings
There was a worn bearing wobble which made sanding impossible. The five minute repair using this part rectified that issue. Shipping to Japan was reasonable and took only afew days
iGlobal -
April 20, 2023
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Output Sleeve And Bearing Asse
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Output shaft screw holes stripped
al - September 28, 2016
👍 3 of 3 people found this instruction helpful
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Removed the center screw replaced the out put shaft put new screws and pad in place.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The screws had backed out of the pad and damaged the aluminum collar that the pad mounted to.
James - September 7, 2016
👍 2 of 2 people found this instruction helpful
Tool Type
Sander
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver
I removed the output assy and installed the new one. I was then able to install the pad and the repair was complete
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Ted - January 7, 2019
👍 1 of 1 people found this instruction helpful
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, None
Parts Used
1. Remove 4 screws holding pad
2. Remove 8 screws holding dust shrowd
3. Remove single screw holding bearing
4. Remove and replace bearing
2. Remove 8 screws holding dust shrowd
3. Remove single screw holding bearing
4. Remove and replace bearing
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Output sleeve and bearing assemble part screw holes were stripped so had to replace the sleeve.
Michael - January 16, 2022
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
1. Took the stripped holes output sleeve/bearing assembly out. 1 screw.
2. Put the new sleeve assembly/bearing in with the original 1 screw.
3. Put the 4 new screws on the sleeve.
(Recommendations: Be gentle on the 4 screws and positioned perfectly b/c if you don't....it WILL strip the holes easily.)
Hope that was helpful. Great speedy delivery service and very accurate parts! Was very easy to pick out thanks to clear part details online!
2. Put the new sleeve assembly/bearing in with the original 1 screw.
3. Put the 4 new screws on the sleeve.
(Recommendations: Be gentle on the 4 screws and positioned perfectly b/c if you don't....it WILL strip the holes easily.)
Hope that was helpful. Great speedy delivery service and very accurate parts! Was very easy to pick out thanks to clear part details online!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Screws broken off in part
Robert - July 26, 2020
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Flat screwdriver
Parts Used
Took broken part out of the Phillips screwdriver and put the new part in.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Output bearing froze up
Martin - April 30, 2017
Tool Type
Sander
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Remove hook and loop pad.
Remove dust collection shroud.
While holding the counter balance weight with channel locks, remove the retaining screw and remove the assembly.
Replace the assembly and follow directions in reverse.
Remove dust collection shroud.
While holding the counter balance weight with channel locks, remove the retaining screw and remove the assembly.
Replace the assembly and follow directions in reverse.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
