Starter Recoil Spring 545008013
Part Number: 545008013
Order within the next 8 hours
and your part ships today!
and your part ships today!
*This part replaces obsolete part #: 5300420-95 and 530042095.
Product Information
Description:
This authentic OEM sourced part is specially made for use with Poulan and Husqvarna chainsaws. The purpose of this spring is to retract the starter assembly, unfortunately, over time it may loose tension or get damaged eventually requiring a replacement. Please make sure to refer to the appropriate diagrams of your model for the exact location and application of this hardware. Keep in mind it is made of durable metal and is sold individually. NOTE: Here is the link to our article on How to Fix the Starter on a Ryobi Trimmer |
Frequently Purchased With
Compatibility
the 150+ compatible machines
This part is compatible with the following machines:
Poulan
P3314 Type 1 Gas Chain Saw
P3314 Type 1 Gas Chain Saw
P3314 Type 2 Gas Chain Saw
P3314 Type 2 Gas Chain Saw
P3314WS Type 1 Gas Chain Saw
P3314WS Type 1 Gas Chain Saw
P3314WS Type 2 Gas Chain Saw
P3314WS Type 2 Gas Chain Saw
P3314WSA Type 1 Gas Chain Saw
P3314WSA Type 1 Gas Chain Saw
P3314WSA Type 2 Gas Chain Saw
P3314WSA Type 2 Gas Chain Saw
P3416 Type 1 Gas Chain Saw
P3416 Type 1 Gas Chain Saw
P3416 Type 2 Gas Chain Saw
P3416 Type 2 Gas Chain Saw
P3516PR Type 1 Gas Chain Saw
P3516PR Type 1 Gas Chain Saw
P3516PR Type 2 Gas Chain Saw
P3516PR Type 2 Gas Chain Saw
P3818AV Type 1 Gas Chain Saw
P3818AV Type 1 Gas Chain Saw
P3818AV Type 2 Gas Chain Saw
P3818AV Type 2 Gas Chain Saw
P4018 Gas Chain Saw
P4018 Gas Chain Saw
P4018AV Type 1 Gas Chain Saw
P4018AV Type 1 Gas Chain Saw
P4018AV Type 2 Gas Chain Saw
P4018AV Type 2 Gas Chain Saw
P4018AV-BH Type 1 Gas Chain Saw
P4018AV-BH Type 1 Gas Chain Saw
P4018AV-BH Type 2 Gas Chain Saw
P4018AV-BH Type 2 Gas Chain Saw
P4018WM Type 1 Gas Chain Saw
P4018WM Type 1 Gas Chain Saw
P4018WM Type 2 Gas Chain Saw
P4018WM Type 2 Gas Chain Saw
P4018WT Type 1 Gas Chain Saw
P4018WT Type 1 Gas Chain Saw
P4018WT Type 2 Gas Chain Saw
P4018WT Type 2 Gas Chain Saw
P3314 Type 1 Gas Chain Saw
P3314 Type 2 Gas Chain Saw
P3314 Type 2 Gas Chain Saw
P3314WS Type 1 Gas Chain Saw
P3314WS Type 1 Gas Chain Saw
P3314WS Type 2 Gas Chain Saw
P3314WS Type 2 Gas Chain Saw
P3314WSA Type 1 Gas Chain Saw
P3314WSA Type 1 Gas Chain Saw
P3314WSA Type 2 Gas Chain Saw
P3314WSA Type 2 Gas Chain Saw
P3416 Type 1 Gas Chain Saw
P3416 Type 1 Gas Chain Saw
P3416 Type 2 Gas Chain Saw
P3416 Type 2 Gas Chain Saw
P3516PR Type 1 Gas Chain Saw
P3516PR Type 1 Gas Chain Saw
P3516PR Type 2 Gas Chain Saw
P3516PR Type 2 Gas Chain Saw
P3818AV Type 1 Gas Chain Saw
P3818AV Type 1 Gas Chain Saw
P3818AV Type 2 Gas Chain Saw
P3818AV Type 2 Gas Chain Saw
P4018 Gas Chain Saw
P4018 Gas Chain Saw
P4018AV Type 1 Gas Chain Saw
P4018AV Type 1 Gas Chain Saw
P4018AV Type 2 Gas Chain Saw
P4018AV Type 2 Gas Chain Saw
P4018AV-BH Type 1 Gas Chain Saw
P4018AV-BH Type 1 Gas Chain Saw
P4018AV-BH Type 2 Gas Chain Saw
P4018AV-BH Type 2 Gas Chain Saw
P4018WM Type 1 Gas Chain Saw
P4018WM Type 1 Gas Chain Saw
P4018WM Type 2 Gas Chain Saw
P4018WM Type 2 Gas Chain Saw
P4018WT Type 1 Gas Chain Saw
P4018WT Type 1 Gas Chain Saw
P4018WT Type 2 Gas Chain Saw
P4018WT Type 2 Gas Chain Saw
P4018WTL Gas Chain Saw
P4018WTL Gas Chain Saw
PP3516 Type 2 Gas Chain Saw
PP3516 Type 2 Gas Chain Saw
PP3816 Type 2 Gas Chain Saw
PP3816 Type 2 Gas Chain Saw
PP3816AV Type 2 Gas Chain Saw
PP3816AV Type 2 Gas Chain Saw
PP4018 Type 2 Gas Chain Saw
PP4018 Type 2 Gas Chain Saw
PP4218AV Type 2 Gas Chain Saw
PP4218AV Type 2 Gas Chain Saw
PP4218AVHD Type 2 Gas Chain Saw
PP4218AVHD Type 2 Gas Chain Saw
PP4218AVL Type 2 Gas Chain Saw
PP4218AVL Type 2 Gas Chain Saw
PPB3416 Type 2 Gas Chain Saw
PPB3416 Type 2 Gas Chain Saw
PPB4018 Type 2 Gas Chain Saw
PPB4018 Type 2 Gas Chain Saw
S1970 Type 1 Gas Chain Saw
S1970 Type 1 Gas Chain Saw
S1970 Type 2 Gas Chain Saw
S1970 Type 2 Gas Chain Saw
SM4218AV Type 2 Gas Chain Saw
SM4218AV Type 2 Gas Chain Saw
PP033 Gas Trimmer
PP4620AVX Gas Chainsaw
PP4620AVX Gas Chainsaw
PP3516AVX Gas Chainsaw
PP3516AVX Gas Chainsaw
PP4218AVX Gas Chainsaw
PP4218AVX Gas Chainsaw
PP338PT Gas Trimmer
PP335 (2010) Gas Trimmer
PP5020AV 2 Stroke Gas Chainsaw
PP5020AV 2 Stroke Gas Chainsaw
PP133 Pro Gas Trimmer
PP333 Trimmer
PP2822 Hedge Trimmer
PP2822 Hedge Trimmer
P4018WTL Gas Chain Saw
PP3516 Type 2 Gas Chain Saw
PP3516 Type 2 Gas Chain Saw
PP3816 Type 2 Gas Chain Saw
PP3816 Type 2 Gas Chain Saw
PP3816AV Type 2 Gas Chain Saw
PP3816AV Type 2 Gas Chain Saw
PP4018 Type 2 Gas Chain Saw
PP4018 Type 2 Gas Chain Saw
PP4218AV Type 2 Gas Chain Saw
PP4218AV Type 2 Gas Chain Saw
PP4218AVHD Type 2 Gas Chain Saw
PP4218AVHD Type 2 Gas Chain Saw
PP4218AVL Type 2 Gas Chain Saw
PP4218AVL Type 2 Gas Chain Saw
PPB3416 Type 2 Gas Chain Saw
PPB3416 Type 2 Gas Chain Saw
PPB4018 Type 2 Gas Chain Saw
PPB4018 Type 2 Gas Chain Saw
S1970 Type 1 Gas Chain Saw
S1970 Type 1 Gas Chain Saw
S1970 Type 2 Gas Chain Saw
S1970 Type 2 Gas Chain Saw
SM4218AV Type 2 Gas Chain Saw
SM4218AV Type 2 Gas Chain Saw
PP033 Gas Trimmer
PP4620AVX Gas Chainsaw
PP4620AVX Gas Chainsaw
PP3516AVX Gas Chainsaw
PP3516AVX Gas Chainsaw
PP4218AVX Gas Chainsaw
PP4218AVX Gas Chainsaw
PP338PT Gas Trimmer
PP335 (2010) Gas Trimmer
PP5020AV 2 Stroke Gas Chainsaw
PP5020AV 2 Stroke Gas Chainsaw
PP133 Pro Gas Trimmer
PP333 Trimmer
PP2822 Hedge Trimmer
PP2822 Hedge Trimmer
Husqvarna
240 (2008-01) Chainsaw
240 (2008-01) Chainsaw
240 E (2008-01) Chainsaw
240 E (2008-01) Chainsaw
137 (2004-10) Chainsaw
137 (2004-10) Chainsaw
137 (2005-03) Chainsaw
137 (2005-03) Chainsaw
137 (2005-09) Chainsaw
137 (2005-09) Chainsaw
137 (2006-01) Chainsaw
137 (2006-01) Chainsaw
137 (2006-12) Chainsaw
137 (2006-12) Chainsaw
137 E (2004-10) Chainsaw
137 E (2004-10) Chainsaw
137 E (2005-03) Chainsaw
137 E (2005-03) Chainsaw
137 E (2005-09) Chainsaw
137 E (2005-09) Chainsaw
137 E (2006-01) Chainsaw
137 E (2006-01) Chainsaw
137 E (2006-12) Chainsaw
137 E (2006-12) Chainsaw
240 (2008-01) Chainsaw
240 E (2008-01) Chainsaw
240 E (2008-01) Chainsaw
137 (2004-10) Chainsaw
137 (2004-10) Chainsaw
137 (2005-03) Chainsaw
137 (2005-03) Chainsaw
137 (2005-09) Chainsaw
137 (2005-09) Chainsaw
137 (2006-01) Chainsaw
137 (2006-01) Chainsaw
137 (2006-12) Chainsaw
137 (2006-12) Chainsaw
137 E (2004-10) Chainsaw
137 E (2004-10) Chainsaw
137 E (2005-03) Chainsaw
137 E (2005-03) Chainsaw
137 E (2005-09) Chainsaw
137 E (2005-09) Chainsaw
137 E (2006-01) Chainsaw
137 E (2006-01) Chainsaw
137 E (2006-12) Chainsaw
137 E (2006-12) Chainsaw
142 (2004-10) Chainsaw
142 (2004-10) Chainsaw
142 (2005-03) Chainsaw
142 (2005-03) Chainsaw
142 (2005-09) Chainsaw
142 (2005-09) Chainsaw
142 (2006-01) Chainsaw
142 (2006-01) Chainsaw
142 (2006-12) Chainsaw
142 (2006-12) Chainsaw
142 E (2004-10) Chainsaw
142 E (2004-10) Chainsaw
142 E (2005-03) Chainsaw
142 E (2005-03) Chainsaw
142 E (2005-09) Chainsaw
142 E (2005-09) Chainsaw
142 E (2006-01) Chainsaw
142 E (2006-01) Chainsaw
142 E (2006-12) Chainsaw
142 E (2006-12) Chainsaw
235 (2008-01) Chainsaw
235 (2008-01) Chainsaw
235 E (2008-01) Chainsaw
235 E (2008-01) Chainsaw
142 (2004-10) Chainsaw
142 (2005-03) Chainsaw
142 (2005-03) Chainsaw
142 (2005-09) Chainsaw
142 (2005-09) Chainsaw
142 (2006-01) Chainsaw
142 (2006-01) Chainsaw
142 (2006-12) Chainsaw
142 (2006-12) Chainsaw
142 E (2004-10) Chainsaw
142 E (2004-10) Chainsaw
142 E (2005-03) Chainsaw
142 E (2005-03) Chainsaw
142 E (2005-09) Chainsaw
142 E (2005-09) Chainsaw
142 E (2006-01) Chainsaw
142 E (2006-01) Chainsaw
142 E (2006-12) Chainsaw
142 E (2006-12) Chainsaw
235 (2008-01) Chainsaw
235 (2008-01) Chainsaw
235 E (2008-01) Chainsaw
235 E (2008-01) Chainsaw
Craftsman
Products Compatibility
This item works with the following types of products:
- • Chain Saw
- • Hedge Trimmer
- • Saw
- • Trimmer
Repair Guides
Articles:
Rope won't recoil? Learn to remove and install the starter recoil spring on your Poulan chainsaw. Step-by-step instructi...
November 14, 2016
|
Questions & Answers for Starter Recoil Spring
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
5 of 6 people found this instruction helpful
Tool Type:
Chain Saw
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Wrench Set, Allen wrench
Recoil starter was bad. Rope would not retract.
Pulled the cover off with the starter.
Took out the old spring.
Installed new parts. I had difficulty getting the recoil spring in without unwinding
Replace wheel and gear.
Tuned the gear to wind the coil.
Reinstall rope.
Tested the recoil starter.
Installed cover back on the chainsaw.
Took out the old spring.
Installed new parts. I had difficulty getting the recoil spring in without unwinding
Replace wheel and gear.
Tuned the gear to wind the coil.
Reinstall rope.
Tested the recoil starter.
Installed cover back on the chainsaw.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 4 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Nutdriver
The hub Eps spring would bend out of shape and not allow the cord to recoil back in saw.
I removed 4 screws holding the housing and removed the housing from the saw, then removed the screw holding the old pull start assembly and removed it. I placed the new recoil spring in the housing and then the cord hub, the eps spring and outer retainer that engages the flywheel. I found that the screw holding the assembly to the flywheel was too short. When tightened it would not allow the string to recoil. I put a small washer under the shoulder of the screw which allowed me to tighten the assembly and also allowing the string to recoil. The washer was not included in the kit or mentioned in the instructions, so you have to improvise. I made it by cutting a wire termination end which turned out to be the right size on the inside and outside. I had been dealing with this issue for some time and Poulan customer service gave me no help in resolving it.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 4 people found this instruction helpful
Tool Type:
Chain Saw
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Recoil spring was broken.
Following the instructions, the project went well.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Chain Saw
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Pliers, Socket set
Chain Saw Pull Rope would not rewind
I took advantage of the replacement information provided by eReplacementParts. I followed the direction and safety procedures provided and knew what to expect when I removed the old parts, and how to deal with situations that could occur during the replacement portion. The directions were easy to follow and the repair went off without any "glitches"
Lee
Lee
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Chain Saw
Parts Used:
Repair Difficulty:
Hard
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Pliers, Tongue depressors, wire cutters
Chainsaw starter recoil spring came loose
1. Placed new spring in the recessed cavity provided, still tightly coiled and bound by the nylon strap used by ereplacementparts for shipping.
2. Inserted two tongue depressors on edge through the vent louvers (Poulan Pro 2075) to hold coiled spring in the recessed cavity.
3. Carefully guided the spring’s end hook into its retaining slot.
4. Carefully clipped 2” sections of the restraining nylon strap and removed them.
5. Carefully removed the tongue depressors, while using my thumb to keep the tightly coiled spring from bursting out of its recessed cavity.
6. Finished replacing the starter rope spool and the starter rope without incident.
ADVICE: This is a tricky operation. Be patient and deliberate. Don’t let that coiled spring burst out of its recessed cavity or you will be right back at Square One.
2. Inserted two tongue depressors on edge through the vent louvers (Poulan Pro 2075) to hold coiled spring in the recessed cavity.
3. Carefully guided the spring’s end hook into its retaining slot.
4. Carefully clipped 2” sections of the restraining nylon strap and removed them.
5. Carefully removed the tongue depressors, while using my thumb to keep the tightly coiled spring from bursting out of its recessed cavity.
6. Finished replacing the starter rope spool and the starter rope without incident.
ADVICE: This is a tricky operation. Be patient and deliberate. Don’t let that coiled spring burst out of its recessed cavity or you will be right back at Square One.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Chain Saw
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
chain saw starter rope wouldn't retract
Removed old pully assembly and recoil spring.
Installed new parts.
Installed new parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Trimmer
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver
Recoil spring sprung.
Starter rope broke.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Chain Saw
Repair Difficulty:
Expert
Time Spent Repairing:
More than 2 hours
Tools Used:
Screwdriver, Pliers
chainsaw starter rope failed to rewind
cover removed, starter rope removed ,new springs put in place, new plastic disc replace. spring tighten , rope reconnected chainsaw started a few times then rope failed to rewind again.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Blower
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Wrench Set
Blower rope broke and spring was weak
Removed rope housing and installed the new rope and spring
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Chain Saw
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers
Pulley would not rewind
Removed rope pulley and replaced it and the recoil spring.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
show more
Reviews
18 Reviews
Average Rating (out of 5):
Click to filter by ratings:
5 stars
16
4 stars
2
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
- 2
Part I needed
Part came as promised. Fit perfectly. Cannot overstate how pleasant it is to have correct part on time as promised.
Guest -
November 8, 2023
Verified Purchase
chain saw part
installation did not go well
Guest -
April 8, 2023
Verified Purchase
Good Service and Easy Repair
Good online video for parts replacement made the repair very easy to do. Chain saw back in operation.
Guest -
December 30, 2022
Verified Purchase
quick and easy
worked as advertised
greg -
December 2, 2021
Verified Purchase
Recoil spring
Works perfectly, right part the first time, thanks.
Guest -
September 24, 2020
Verified Purchase
A+
Part fixed the issue.
Guest -
September 21, 2020
Verified Purchase
Exactly as shown.
Great quality and worked really well.
iGlobal -
July 23, 2020
Verified Purchase
Just what I needed
Once my parts shipped, they got here quickly. Same parts as factory, perfect fit. Got my saw back up and running in no time. Just be sure not to over-wind the new spring or it’ll bind up.
Guest -
July 15, 2020
Verified Purchase
You are the only place I could find this part.
Fast delivery and exactly what I needed. Thank you.
Guest -
February 10, 2020
Verified Purchase
These people know their parts.
My chain saw was no longer working. Not only did ReplacementParts.com have the parts I needed but also had detailed videos on how to do the job. The chain saw is working great now!
Guest -
November 16, 2019
Verified Purchase
Verified Purchase
eReplacementParts Team
< PREV
- 1
- 2
Product Information
Repair Guides
Articles:
Rope won't recoil? Learn to remove and install the starter recoil spring on your Poulan chainsaw. Step-by-step instructi...
November 14, 2016
|