Easy
Less than 15 minutes
This is a Genuine OEM replacement part used on some String Trimmers/Edgers. This is a Metal Spring and it is Sold Individually. Over time springs may loose its tension and may not function as intended. If this part is lost or damaged it must be replaced.
Compression Spring 679034001
OEM part for: Ryobi
Part Number: 679034001
$5.19
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 22 machines
Ryobi
RY40200 40 Volt String Trimmer View Diagrams & Manuals
RY24200 24 Volt String Trimmer View Diagrams & Manuals
P2005 String Trimmer/Edger View Diagrams & Manuals
P2006 18V String Trimmer/Edger View Diagrams & Manuals
P2003 18V String Trimmer View Diagrams & Manuals
P2004 18V String Trimmer View Diagrams & Manuals
P2200 18 Volt Hybrid String Trimmer View Diagrams & Manuals
P2006A P2006A 18 Volt String Trimmer/Edger View Diagrams & Manuals
P2008 (107268001) String Trimmer/Edger View Diagrams & Manuals
P2008 (107268001) Ryobi String Trimmer View Diagrams & Manuals
P1102 (107179001) 18 Volt Lawn Mower View Diagrams & Manuals
P20103 (107890024) Cordless String Trimmer View Diagrams & Manuals
RY40204 (107283001) String Trimmer View Diagrams & Manuals
P20010 (107491001) Cordless String Trimmer View Diagrams & Manuals
P2008VNM (107268101) Ryobi String Edger View Diagrams & Manuals
P2003VNM (107938101) 18 Volt String Trimmer View Diagrams & Manuals
P20015VNM P20015vnm 18 Volt String Trimmer Mfg. No. 108654001 6-1-21 (Rev:02) View Diagrams & Manuals
P2008 P2008 String Trimmer Mfg. No. 107268001 6-23-20 (Rev:06) View Diagrams & Manuals
RY40204 Ry40204 String Trimmer Mfg. No. 107283012 5-13-20 (Rev:01) View Diagrams & Manuals
RY40204VNM Ry40204vnm String Trimmer Mfg. No. 107283112 5-13-20 (Rev:01) View Diagrams & Manuals
P20102VNM P20102vnm 18 Volt String Trimmer/Edger Mfg. No. 107482101 11-7-20 (Rev:02) View Diagrams & Manuals
P20103VNM P20103vnm 18 Volt String Trimmer/Edger Mfg. No. 107890101 2-23-21 (Rev:03) View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Trimmer Parts
- Edger Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
17
4 stars
2
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
- 2
Weadeater fan head ,
I received my parts in a timely manner and it works great on myweed eater
Anonymous -
September 29, 2022
Verified Purchase
Exact part and easy look up.
Easy to fix and my string trimmer now will advance string.
Ray -
June 2, 2022
Verified Purchase
Easy
Perfect condition and fast ship
Nancy -
May 24, 2022
Verified Purchase
Quick and easy repair
Parts arrived quickly and fit perfectly.
Guest -
May 7, 2022
Verified Purchase
it work great
very good
Guest -
April 6, 2022
Verified Purchase
Easy repair, part with quickly received and fit perfectly
Both parts work out great and the unit is working great
Guest -
June 30, 2021
Verified Purchase
fixed the weed wacker
I ordered 2 little pieces easily from Ereplacementparts they arrived quickly and I was able to have the line trimmer up and running in a couple of minutes
Guest -
June 9, 2021
Verified Purchase
As advertised...
Part delivered was exactly what I ordered, and shipping was fast. Will do business again.
Guest -
August 24, 2020
Verified Purchase
Easy Repair
Arrived quickly and fit perfectly. String trimmer working again.
Guest -
July 2, 2020
Verified Purchase
Easy repair
Part arrived on time and replacement was easy. Trimmer worked much better but stalled after longer use than previous. Will observe other causes. But very satisfied overall.
Guest -
May 25, 2020
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Compression Spring
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Trimmer not releasing new string, and deflector shield not cutting the line well.
BJ - May 14, 2017
👍 8 of 9 people found this instruction helpful
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
1. Remove the old cap
2. Take out the spool.
3. Remove 4 screws (Phillips) securing the grass deflector assembly.
4. Looked at a great YouTube video showing how to remove the plastic slider and spring.
5. Mine did not come as easily as in the video had to use a flat screwdriver to pop it back and out.
6. Put in the new plastic sider and compression spring.
7. Put the new deflector assembly on.
8. Put the 4 screws back in.
9. Replaced the spool.
10. Put the new cap on.
11. Works like a champ again; line feeding out like it used to.
2. Take out the spool.
3. Remove 4 screws (Phillips) securing the grass deflector assembly.
4. Looked at a great YouTube video showing how to remove the plastic slider and spring.
5. Mine did not come as easily as in the video had to use a flat screwdriver to pop it back and out.
6. Put in the new plastic sider and compression spring.
7. Put the new deflector assembly on.
8. Put the 4 screws back in.
9. Replaced the spool.
10. Put the new cap on.
11. Works like a champ again; line feeding out like it used to.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The parts were missing and might have fallen out. Replacing parts was easy, took about 10 minutes
Craig - May 16, 2016
👍 7 of 9 people found this instruction helpful
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Place spring into imprinted hole. Begin to slide the plastic slider onto shaft until extended plastic slips into collar hole. Depress end of spring to fit in hole in inside of collar. Install string bobin and cap. Test if string works and feeds normally.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
I bought the floor model and the compression spring and plastic slider were missing. Got the parts fast, took less than 5 minutes to fix and trimmer is working perfect!
Nancy - July 4, 2018
👍 2 of 2 people found this instruction helpful
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Placed the spring in its spot and slid the plastic slider until it clicked into place. Done
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The spring and plastic feed fell out and had to replace
Brian - August 27, 2018
👍 1 of 1 people found this instruction helpful
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Hands
Inserted the spring with the slider assembly and installed in the trimmer.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Spring needed replacing
David - June 8, 2023
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
Parts Used
1. Remove the cover
2 . Removed the trim line
3. Pushed back the slide
4.Pulled out the old spring
5. Replaced spring
2 . Removed the trim line
3. Pushed back the slide
4.Pulled out the old spring
5. Replaced spring
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Spool base was broken
Mildred - September 29, 2022
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
Put small screwdriver into hole to hold shaft,used pliers to remove old thread base,put new spoolbase on with hands,could not find anything to tell me how to remove old thread base,but luckily i have a jack of all trde daughter ,,Ryobi 18 volt weed trimmer
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Line would not advance.
Norman - September 13, 2022
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Removed the spool cap.
Removed the spool.
Pushed the plastic slider in as far as I could with my fingers then used a flat head screwdriver to pry up from underneath to release it.
Inserted new spring into the end of the new plastic slider.
Placed everything back in reverse order.
Done in less than 5 minutes
Removed the spool.
Pushed the plastic slider in as far as I could with my fingers then used a flat head screwdriver to pry up from underneath to release it.
Inserted new spring into the end of the new plastic slider.
Placed everything back in reverse order.
Done in less than 5 minutes
Did you find this story helpful?
Thanks for voting and helping fellow customers!
String would not automatically feed. Ryobi P2006 18V
Rhonda - August 7, 2022
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
1. Cleaned string trimmer.
2. Remove plastic cap and string spool.
3. Used flat head screwdriver to gently push and lift the plastic slider out of place.
4. Removed old spring and old plastic slider.
5. Placed new spring into end of new plastic slider.
6. Gently pushed parts into place.
7.Restrung line onto spool.
8.Thread string through spool hole.
9.Put spool into place.
10. Placed plastic cap back in place.
2. Remove plastic cap and string spool.
3. Used flat head screwdriver to gently push and lift the plastic slider out of place.
4. Removed old spring and old plastic slider.
5. Placed new spring into end of new plastic slider.
6. Gently pushed parts into place.
7.Restrung line onto spool.
8.Thread string through spool hole.
9.Put spool into place.
10. Placed plastic cap back in place.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Heavy duty weed cutting in large yard. Hit a large hidden rock. The heavy duty blades came out and so did the slider and spring.
William - July 6, 2022
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, None
The new slider assembly and spring fixed it right up!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Line kept unwinding
Judi - July 2, 2022
Tool Type
Edger
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, None
I figured out how the plastic slider fit. Then saw the tiny opening for the spring and popped them into place. I thought I would need a guy to help, but I figured it out on my own. Judi
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
