Product Information
Description:
This is an original replacement part sourced directly from the manufacturer. The thrust washer is commonly found in DeWALT table saws. This part is made of metal, and is used to provide a secure seat for the height adjustment screw in the support plate assembly. You may require a screwdriver and wrench when replacing this product. This item is sold as an individual replacement part. |
Compatibility
the 28 compatible machines
This part is compatible with the following machines:
DeWALT
DW744S Type 2 Jobsite Table Saw
DW744S Type 2 Jobsite Table Saw
DW744S Type 3 Jobsite Table Saw
DW744S Type 3 Jobsite Table Saw
DW744 Type 1 Jobsite Table Saw
DW744 Type 1 Jobsite Table Saw
DW744 Type 2 Jobsite Table Saw
DW744 Type 2 Jobsite Table Saw
DW744 Type 3 Jobsite Table Saw
DW744 Type 3 Jobsite Table Saw
DW744SB Type 3 Table Saw
DW744SB Type 3 Table Saw
DW744X Type 4 Table Saw
DW744X Type 4 Table Saw
DW744S Type 2 Jobsite Table Saw
DW744S Type 3 Jobsite Table Saw
DW744S Type 3 Jobsite Table Saw
DW744 Type 1 Jobsite Table Saw
DW744 Type 1 Jobsite Table Saw
DW744 Type 2 Jobsite Table Saw
DW744 Type 2 Jobsite Table Saw
DW744 Type 3 Jobsite Table Saw
DW744 Type 3 Jobsite Table Saw
DW744SB Type 3 Table Saw
DW744SB Type 3 Table Saw
DW744X Type 4 Table Saw
DW744X Type 4 Table Saw
DW744XCDN Type 4 10 Table Saw
DW744XCDN Type 4 10 Table Saw
DW744XRSCDN Type 4 10" Table Saw
DW744XRSCDN Type 4 10" Table Saw
DW744XRS Type 4 10" Table Saw
DW744XRS Type 4 10" Table Saw
DW744XRS Type 5 10" Table Saw
DW744XRS Type 5 10" Table Saw
DW744XRS Type 6 10" Table Saw
DW744XRS Type 6 10" Table Saw
DW744X Type 5 10" Table Saw
DW744X Type 5 10" Table Saw
DW744X Type 6 10" Table Saw
DW744X Type 6 10" Table Saw
DW744XCDN Type 4 10 Table Saw
DW744XRSCDN Type 4 10" Table Saw
DW744XRSCDN Type 4 10" Table Saw
DW744XRS Type 4 10" Table Saw
DW744XRS Type 4 10" Table Saw
DW744XRS Type 5 10" Table Saw
DW744XRS Type 5 10" Table Saw
DW744XRS Type 6 10" Table Saw
DW744XRS Type 6 10" Table Saw
DW744X Type 5 10" Table Saw
DW744X Type 5 10" Table Saw
DW744X Type 6 10" Table Saw
DW744X Type 6 10" Table Saw
Products Compatibility
This item works with the following types of products:
- • Saw
- • Table Saw
Questions & Answers for Washer,thrust
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Table Saw
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
30-60 minutes
Tools Used:
Screwdriver, Pliers, Socket set, Adjustable Wrench
Height Adjustment Screw was worn out
Removed the height adjustment rotating handle and the locking mechanism to allow for removal of the front face plate. With the use of two locking pliers I forced the Follower Nut off the badly cross threaded Height Adjustment Screw and was able to remove both. Simply reversed the procedure and replaced damaged parts with new. Tested the new adjustment screw and then put everything back together.
The two screws holding the locking lever for the table saw fence are also used to hold the front face plate and they are a real challenge to get started. I used a very small screw driver to line up the holes and was only then able to get them started without cross threading them.
The two screws holding the locking lever for the table saw fence are also used to hold the front face plate and they are a real challenge to get started. I used a very small screw driver to line up the holes and was only then able to get them started without cross threading them.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information