Easy
Less than 15 minutes
This is a genuine OEM replacement part, it is sold individually.
The purpose of this washer is to act as a spacer between the chain sprocket and as a friction barrier on the chainsaw models shown below.
This is a wear part that we send out quite often.
It is advised to order an extra one or two to keep on hand.
Washer 33302102G
OEM part for: Homelite, Ryobi
Part Number: 33302102G
$4.99
In Stock
Ships within 1 business day 
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 11 machines
Homelite
UT43100A Electric Chainsaw View Diagrams & Manuals
UT43120A Electric Chainsaw View Diagrams & Manuals
UT43100 14'' Electric Chainsaw View Diagrams & Manuals
UT43120 16'' Electric Chainsaw View Diagrams & Manuals
UT43102 Electric Chainsaw View Diagrams & Manuals
UT43122 Electric Chainsaw View Diagrams & Manuals
UT-43160 Electric Pole Saw View Diagrams & Manuals
30254EG Expert Gardner Electric Pole Saw View Diagrams & Manuals
UT43103 Electric Chain Saw View Diagrams & Manuals
Ryobi
RY43160 Electric Pole Saw View Diagrams & Manuals
RY43160A Electric Pole Saw View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Chain Saw Parts
- Saw Parts
- Pole Saw Parts
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
1
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Great part replacement source
Perfect replacement washer and fit correctly. Communication was great from order to delivery. Packaged very well also. Recommend people use replacement parts any time! Limb trimmer back in service.
Guest -
February 23, 2021
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Washer
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Chain kept slipping off sprocket
Richard - September 15, 2016
👍 5 of 5 people found this instruction helpful
Tool Type
Pruner
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Socket set
Put sprocket , washer and retaining ring on pruner --I had apparently lost retainer ring --this piece was important to keep everything in place
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Chain was dull and washer was worn
Ronald - September 21, 2016
👍 2 of 2 people found this instruction helpful
Tool Type
Pole Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set
Parts Used
Remove the tension on the chain. Then remove the chain cover. remove the old chain. Then remove the retaining ring from the shaft. And remove the worn washer and put the new one on, then the retaining ring. Install the new chain. Replace the chain cover , then adjust the chain tension accordingly.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Sprocket came off and was lost. Circlip was apparently missing.
Fred - August 15, 2018
Tool Type
Chain Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set, Circlip pliers
1. Slid the new sprocket and thrust washer on the motor shaft.
2. Used the circlip pliers to install the new circlip
3. Reassembled the chain and tensioner.
2. Used the circlip pliers to install the new circlip
3. Reassembled the chain and tensioner.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Chain kept popping off
Brian - June 1, 2018
Tool Type
Pole Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set, Needle nose pliers for retaining ring
I did not notice that the retaining ring was missing.
When I received all parts ordered everything when together very easy & fast.
When I received all parts ordered everything when together very easy & fast.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Broken sprocket.
Richard - April 6, 2018
Tool Type
Chain Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Snap ring pliers
Parts Used
1. Removed the side cove and the blade.
2. Removed the snap ring washer.
3. Replaced the broken sprocket, the washer and the snap ring.
2. Removed the snap ring washer.
3. Replaced the broken sprocket, the washer and the snap ring.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Lost the ring and washer
Juan - March 17, 2018
Tool Type
Pole Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Socket set, Snap ring pliers
Parts Used
Replaced lost parts
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Lost sprocket washer and retaining ring in bushes could not find
Lupe - February 28, 2018
Tool Type
Chain Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set, Retaining ring pliers
Take chain cover off ,put new sprocket with retainer ring holding it and washer. Put chain back on guide and adjusted slack on chain. Ready to go . Worked great. Started cutting tree again.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Retainging ring broke.
Dale - January 29, 2018
Tool Type
Chain Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Parts Used
Replaced with the new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Pole saw needed a new chain sprocket
EDUARDO - January 1, 2018
Tool Type
Pole Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver
1. Removed the cover
2. Installed the washer on the shaft
3. Installed the sprocket on the shaft
4. Installed the retaining ring
5. Re-installed the chain
6. Re-installed the cover and torqued the nut
2. Installed the washer on the shaft
3. Installed the sprocket on the shaft
4. Installed the retaining ring
5. Re-installed the chain
6. Re-installed the cover and torqued the nut
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The original snap ring fell off.
Edward - December 15, 2017
Tool Type
Chain Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Pliers, Snap ring pliers.
Parts Used
Used snap ring pliers to install the new snap ring and washer. Back in business.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
