*This part replaces obsolete part #: 45-88-1880.
Product Information
Description:
This is a genuine OEM sourced replacement part which is specially designed for use with Milwaukee power tools. Washers are generally utilized to provide a tight seal between connected parts, over time it may wear out and begin to fail eventually requiring a replacement. Keep in mind this high-quality hardware is made of durable metal and is sold individually. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this item. |
Frequently Purchased With
Compatibility
the 18 compatible machines
This part is compatible with the following machines:
Milwaukee
0881-20 (SER B23A) 1/4" Hex Impact Driver
2650-20 (SER B55A) 18 Volt 1/4" Hex Impact Driver
2650-21 (SER B55A) 18 Volt 1/4" Hex Impact Driver
2650-22 (SER B55A) 18 Volt 1/4" Hex Impact Driver
2652-20 (SER B78A) 18 Volt 1/2" Square Impact Driver
2652-22 (SER B78A) 18 Volt 1/2" Square Impact Driver
2455-20 (SER C34A) Cordless 12 Volt No-Hub Coupling Driver-Drill
2455-20 (SER C34A) Cordless 12 Volt No-Hub Coupling Driver-Drill
2650-20 (B55B) 18 Volt 1/4" Hex Impact Driver
2650-20 (SER B55A) 18 Volt 1/4" Hex Impact Driver
2650-21 (SER B55A) 18 Volt 1/4" Hex Impact Driver
2650-22 (SER B55A) 18 Volt 1/4" Hex Impact Driver
2652-20 (SER B78A) 18 Volt 1/2" Square Impact Driver
2652-22 (SER B78A) 18 Volt 1/2" Square Impact Driver
2455-20 (SER C34A) Cordless 12 Volt No-Hub Coupling Driver-Drill
2455-20 (SER C34A) Cordless 12 Volt No-Hub Coupling Driver-Drill
2650-20 (B55B) 18 Volt 1/4" Hex Impact Driver
2453-20 (E15A) Hex Impact Driver
2453-20 (E15B) Hex Impact Driver
2650-20 (B55C) 18 Volt 1/4" Hex Impact Driver
2453-20 M12 Brushless 1/4" Square Impact Driver
2453-22 M12 Brushless 1/4" Hex Impact Driver
245520 Cordless 12 Volt No-Hub Coupling Driver-Drill
245520 Cordless 12 Volt No-Hub Coupling Driver-Drill
2455-22 Cordless 12 Volt No-Hub Coupling Driver-Drill
2455-22 Cordless 12 Volt No-Hub Coupling Driver-Drill
2453-20 (E15B) Hex Impact Driver
2650-20 (B55C) 18 Volt 1/4" Hex Impact Driver
2453-20 M12 Brushless 1/4" Square Impact Driver
2453-22 M12 Brushless 1/4" Hex Impact Driver
245520 Cordless 12 Volt No-Hub Coupling Driver-Drill
245520 Cordless 12 Volt No-Hub Coupling Driver-Drill
2455-22 Cordless 12 Volt No-Hub Coupling Driver-Drill
2455-22 Cordless 12 Volt No-Hub Coupling Driver-Drill
Products Compatibility
This item works with the following types of products:
- • Cordless Drill
- • Drill
- • Impact Driver
Questions & Answers for Washer Od 15.4 X Id 12.4
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Impact Driver
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Allen wrench to retain clip
Replacement of broken collar
Removed collar to install new one and snap ring went flying lol so back to e replacement
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Impact Driver
Parts Used:
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Pliers
broken collet
replaced broken collet, spring, flat washer and retaing clip
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Impact Driver
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, dental pick for removing the retaining ring on the nose
The sleeve that retains the bit broke in half so the 3mm ball fell out and would not retain the driver bit
Remove sleeve retainer ring/clip
Insert the 3mm ball ,spring and sleeve
While compressing sleeve down against the spring ,install the retainer clip/ring...and you are done with fun in the sun!! Later Gator!
Insert the 3mm ball ,spring and sleeve
While compressing sleeve down against the spring ,install the retainer clip/ring...and you are done with fun in the sun!! Later Gator!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information