Easy
15-30 minutes
This is a genuine manufacturer-sourced replacement part which is specially designed for use with Char-Broil grills. It helps a user to keep the vegetables and the breads toasty while the main course is searing on the lower deck. Keep in mind this high-quality chrome plated warming grid is sold individually. Please make sure to refer to the owners manual for the correct application of this component.
Warming Grid G560-0004-W1
OEM part for: Char-Broil
Part Number: G560-0004-W1
$13.69
In Stock
Order within the next 6 hours and your part ships today! 
Jump To:
Frequently Purchased Together ?
Compatibility
This part will fit the following 3 machines
Char-Broil
463211511 4-Burner Grill With Side Burner View Diagrams & Manuals
463210311 4-Burner Gas Grill With Side Burner View Diagrams & Manuals
466211513 Classic Grill View Diagrams & Manuals
This item works with the following types of products:
Repair Videos ?
Articles:
|
Having trouble getting your grill to light up? A common cause of this issue is a defective ignition switch. We'll sho...
November 08, 2012
|
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Warming Grid
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Some grill parts were rusted and some did not come up clean enough after scrubbing to put food on.
Mary - June 2, 2017
Tool Type
Outdoor Grill
Difficulty
Easy
Time
30-60 minutes
Tools Used
, no tools needed
Removed all inside parts.
Washed with soapy water, scrubbed the grill surfaces.
Swept all of the burned food particles out of the bottom of the grill.
Washed the inside of the grill.
When I received the new parts in the mail, I just put them in place and recycled the old parts.
It was very easy, no screws involved.
My husband was impressed.
Washed with soapy water, scrubbed the grill surfaces.
Swept all of the burned food particles out of the bottom of the grill.
Washed the inside of the grill.
When I received the new parts in the mail, I just put them in place and recycled the old parts.
It was very easy, no screws involved.
My husband was impressed.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
normal wear and tear on parts under extreme heat
Matt - August 14, 2016
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
1. Removed grates on grill
2. Replaced heat tents
3. Replaced grates
4. Removed old warming grate
5. Replaced with new warming grate
6. Removed wing nut from temperature gauge
7. Removed temperature gauge
8. Replaced gauge
9. Tightened up wing nut
10. Success!
2. Replaced heat tents
3. Replaced grates
4. Removed old warming grate
5. Replaced with new warming grate
6. Removed wing nut from temperature gauge
7. Removed temperature gauge
8. Replaced gauge
9. Tightened up wing nut
10. Success!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tube burners were split, carry over tubes were corroded away, warming grid was rusty.
Allen - July 13, 2016
Tool Type
Outdoor Grill
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Wrench Set, Adjustable Wrench
Removable of the old parts was the hardest, rust and corrosion. Replacing the new parts was easy, they fit like they should.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Low heat in grill
Donald - May 24, 2016
Tool Type
Outdoor Grill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Remove the screws from the old tubes, then just screw on the new carryover tubes. Place the warming grid in the lid. Remove the cooking grates. then just lift out the old heat tents and replace them with the new ones. I couldn't believe someone would have the parts for this older grill. Excellent company.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Rusted screws on carry over tubes
ted - March 12, 2016
Tool Type
Outdoor Grill
Difficulty
Easy
Time
15-30 minutes
Tools Used
Power Drill
Use a power drill and drill bit to remove the rusted screws that holds down the carry over tubes in place, use the same size bit as the screw as to not to make the hole bigger for the new screws that are provided with the new carry over tubes. Just replace the heat tents, warming grid and grease tray by hand.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Parts had rusted out
Brenda - February 17, 2016
👍 0 of 1 people found this instruction helpful
Tool Type
Outdoor Grill
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Removed the screws from the old carry over tubes, and replaced them with the screws supplied with the new tubes. Removed the cooking grates and replace the heat tents. Then simply replace the warming grid. Simple.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
