Easy
15-30 minutes
A genuine Delta replacement part, sold individually.
A trunnion is a cylindrical protrusion used as a mounting and/or pivoting point. Held in place by three Cap Screws (901027631530), this part is compatible with the band saws listed below.
A wrench is needed for repair.
Trunnion W/ No Scale 426020950002S
OEM part for: Delta
Part Number: 426020950002S
$12.24
Usually ships in 7 - 12 business days
Leaves our warehouse within 7 - 12 business days
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.39 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This part will fit the following 40 machines
Delta
28-209 Type 1 Band Saw View Diagrams & Manuals
28-230 Type 1 Band Saw View Diagrams & Manuals
28-240 Type 1 Band Saw View Diagrams & Manuals
28-248 Type 1 Band Saw View Diagrams & Manuals
28-248F Type 1 Band Saw View Diagrams & Manuals
28-348G Type 1 Band Saw View Diagrams & Manuals
28-380 Type 1 Band Saw View Diagrams & Manuals
28-475X Type 1 Band Saw View Diagrams & Manuals
28-141 Type 1 Band Saw View Diagrams & Manuals
28-200 Type 1 Band Saw View Diagrams & Manuals
28-243 Type 1 Band Saw View Diagrams & Manuals
28-276 14"3/4HP Motor Open Stand Band Saw View Diagrams & Manuals
28-203 Type 1 Band Saw View Diagrams & Manuals
28-348 Type 1 14" Band Saw View Diagrams & Manuals
28-348F Type 1 14" Band Saw View Diagrams & Manuals
28-306 Type 1 14" Band Saw View Diagrams & Manuals
28-303 Type 1 Band Saw View Diagrams & Manuals
28-300 Type 1 Band Saw View Diagrams & Manuals
28-299 Type 1 14" Band Saw View Diagrams & Manuals
28-299A Type 1 14" Band Saw View Diagrams & Manuals
28-293 Type 1 14" Band Saw View Diagrams & Manuals
28-290 Type 1 14" Band Saw View Diagrams & Manuals
28-285 Type 1 14" Band Saw View Diagrams & Manuals
28-278 Type 1 14" Band Saw View Diagrams & Manuals
28-275 Type 1 Band Saw View Diagrams & Manuals
28-270 Type 1 Band Saw View Diagrams & Manuals
28-269 Type 1 Band Saw View Diagrams & Manuals
28-263 Type 1 14" Band Saw View Diagrams & Manuals
28-262 Type 1 14" Band Saw View Diagrams & Manuals
28-255 Type 1 Band Saw View Diagrams & Manuals
28-254 Type 1 14" Band Saw View Diagrams & Manuals
28-248G Type 1 14" Band Saw View Diagrams & Manuals
28-245 Type 1 Band Saw View Diagrams & Manuals
28-241 Type 1 14" Band Saw View Diagrams & Manuals
28-231 Type 1 14" Band Saw View Diagrams & Manuals
28-216 Type 1 14" Band Saw View Diagrams & Manuals
28-283 Type 1 Band Saw View Diagrams & Manuals
28-280 Type 1 Band Saw View Diagrams & Manuals
18-900L (Type 1) 18" Drill Press View Diagrams & Manuals
18-900L 18" Laser Drill Press View Diagrams & Manuals
Show More Compatible Models
This item works with the following types of products:
- Band Saw Parts
- Saw Parts
This part replaces obsolete part #: 5140088-78, 907241, 426020950002
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
8
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Quality parts
Excellent fitting parts delivered in rapid time. Would use this company again.
Guest -
January 29, 2023
Verified Purchase
Part was exactly what I needed. Easy repair.
Part arrived fast.
Frank -
November 9, 2021
Verified Purchase
Drill press repair
I purchased these hoping they would replace the trunnions on my Delta floor drill press. I was pleased when they arrived to see that they were an exact match. The shipping was fast . They don’t have the hole for the angle scale on the side but I don’t need that so it isn’t an issue for me. Very happy since the part number I needed for the drill
Press was “obsolete “
Guest -
August 4, 2021
Verified Purchase
Easy repair. Tilt table broke in the house move
Repair trunnion was better quality than original Thumbs up to ereplacementparts.com.
Guest -
October 28, 2020
Verified Purchase
Wow !
I found the Right part to repair my old Band Saw !!! Thanks !
Guest -
July 7, 2020
Verified Purchase
these parts saved my Delta drill press!!!!
Without these parts being available my Delta laser drill press would essentially be junk. The table would not be usable without these these trunnions and most other parts are no longer made. Really glad I found E-replacement parts. I only wish you had some of the other parts I also need but no one has them! Thank you!
Guest -
June 17, 2020
Verified Purchase
Easy fix, better built than original.
Just what I needed.
Larry -
May 18, 2020
Verified Purchase
Better than the original that came with the saw.
Better made replacement for the original at a very good price. Replacement was quick and easy.
Guest -
April 29, 2020
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Trunnion W/ No Scale
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Both trunnions broke
Basil - December 17, 2016
👍 15 of 15 people found this instruction helpful
Tool Type
Band Saw
Difficulty
Easy
Time
30-60 minutes
Tools Used
Wrench Set, Allen wrench, belt sander
Parts Used
The trunnions I ordered were beefer than original. So some modifications were needed.
1. Removed the knobs from the cap screws and removed the table from the saw. Turning it upside down on the work bench.
2. Removed the old trunnions with a 7/16" wrench
3. Used a belt sander to take some width off each side of the clamp shoe until it fit smoothly in the trunnion.
4. The feet on the trunnion had more height so replaced the mounting bolts with 1/4-20 x 3/4" button head screws.
5. Making sure to put the smaller cap screw in the rear, mounted the new trunnions in place.
6. Remounted the table back on the saw.
1. Removed the knobs from the cap screws and removed the table from the saw. Turning it upside down on the work bench.
2. Removed the old trunnions with a 7/16" wrench
3. Used a belt sander to take some width off each side of the clamp shoe until it fit smoothly in the trunnion.
4. The feet on the trunnion had more height so replaced the mounting bolts with 1/4-20 x 3/4" button head screws.
5. Making sure to put the smaller cap screw in the rear, mounted the new trunnions in place.
6. Remounted the table back on the saw.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Both trunnions were broken
John - November 11, 2015
👍 6 of 6 people found this instruction helpful
Tool Type
Band Saw
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Power Drill, Socket set
Parts Used
Removed table from bandsaw, matched up trunnions removed old ones by removing the 3 screws on each one that screw into the bottom of the table. Placed back on bandsaw, took about 20 minutes to line everything up works great.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Trunnions broke into multiple pieces
Merle - April 23, 2017
👍 4 of 4 people found this instruction helpful
Tool Type
Band Saw
Difficulty
Medium
Time
30-60 minutes
Tools Used
Socket set, Wrench Set, Square, level
Parts Used
1. Remove table from machine
2. Unbolt trunnions
3. Loosely install new trunnions, these replacement trunnions are much beefier, much better than the original (OE) parts
4. Reposition tilt table and snug attach bolts
5. Check table for proper position and tighten attach bolts
2. Unbolt trunnions
3. Loosely install new trunnions, these replacement trunnions are much beefier, much better than the original (OE) parts
4. Reposition tilt table and snug attach bolts
5. Check table for proper position and tighten attach bolts
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Ordered front and rear trunnions for 28-206 Delta Bandsaw table after and accident.
Carl - August 25, 2017
👍 2 of 2 people found this instruction helpful
Tool Type
Band Saw
Difficulty
Medium
Time
1-2 hours
Tools Used
Power Drill, Socket set, Wrench Set
Parts Used
1. Ordered front and rear trunnions when notified that the front trunnion was not available
anymore.
2. Noticed that the front and rear trunnions were identical except that the front had a table level scale that was attach and not really needed (also cost more).
3. Called to make the change and receive the order in a few days.
4. Both items were the same and the table works fine.
anymore.
2. Noticed that the front and rear trunnions were identical except that the front had a table level scale that was attach and not really needed (also cost more).
3. Called to make the change and receive the order in a few days.
4. Both items were the same and the table works fine.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Band saw was damaged when it fell over during a house move. Saw table took impact of fall, trunnions broke.
John - November 10, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Band Saw
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Wrench Set
Parts Used
1. Compared new trunnions with broken trunnions to confirm that they would fit. (Part number was different than original, but was the recommended replacement. Mounting lugs on new trunnions were beefier and better than original, though they did elevate the saw table approx. 1/16" higher than original.
2. Purchased slightly longer mounting bolts due to thicker mounting lugs.
3. Attached angle scale from old front trunnion to new front trunnion, by drilling holes and attaching with screws.
4. Reassembled trunnions and saw table to bandsaw. .
5. Resquared / releveled saw table. Make sure bandsaw blade still tracks in center of saw table hole, then tighten mounting bolts.
2. Purchased slightly longer mounting bolts due to thicker mounting lugs.
3. Attached angle scale from old front trunnion to new front trunnion, by drilling holes and attaching with screws.
4. Reassembled trunnions and saw table to bandsaw. .
5. Resquared / releveled saw table. Make sure bandsaw blade still tracks in center of saw table hole, then tighten mounting bolts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Original trunniions broke apart due to poor design.
George - June 28, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Band Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set
Parts Used
Took table off of band saw and removed broken trunnions.
Installed new trunnions on band saw.
Set table on top of new trunnions
screwed table to new trunnions.
FYI, left and right trunnion is identical.
Installed new trunnions on band saw.
Set table on top of new trunnions
screwed table to new trunnions.
FYI, left and right trunnion is identical.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Both of my trunnions were broken and needed to be replaced.
JAMES - October 7, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Band Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set, Wrench Set
Removed the table top
Removed old parts
Replaced with new parts
Reattached the table top.
The replacement part was superior to the original part that I replaced!
Removed old parts
Replaced with new parts
Reattached the table top.
The replacement part was superior to the original part that I replaced!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Trunnions self 'destructed (with a little help from me)
Joseph - October 13, 2018
Tool Type
Band Saw
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Power Drill, Socket set, Center punch and small dril set (1/16\\
Parts Used
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Broken trunnion during move.
Justin - September 23, 2018
Tool Type
Drill Press
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Allen wrench
Parts Used
Remove the table and replace the trunnion. Very easy, no instructions needed.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Ears were broken off of trunnions.
Mark - September 3, 2018
Tool Type
Band Saw
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Power Drill, Socket set, # 4-40 tap
Parts Used
Just remove and replace but I had to transfer the angle scale from the old one to one of the new ones.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
