*This part replaces obsolete part #: 908889, 229757, 279992, 568782 and 635847.
Product Information
Description:
The trigger valve body with handle attaches to the elbow and the spray tube. This item is available as an individual replacement part that is made out of metal and plastic. This is an original Shindaiwa part for use in sprayers. It might require a set of pliers to replace this part if it becomes broken. |
Products Compatibility
This item works with the following types of products:
- • Paint Sprayer
Questions & Answers for Trigger Valve Body W-handle
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
Tool Type:
Paint Sprayer
Repair Difficulty:
Medium
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Taper tool to install new gasket
Plunger gasket deteriorated over time
1. removed old plunger gasket
2. made a taper-tool the size of the retaining collar
3. placed the new gasket on the taper-tool
4. aligned the taper-tool with the retaining collar and pressed the new gasket past the retaining collar
2. made a taper-tool the size of the retaining collar
3. placed the new gasket on the taper-tool
4. aligned the taper-tool with the retaining collar and pressed the new gasket past the retaining collar
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information