Easy
15-30 minutes
Genuine Delta Wheel Tire for Bandsaws. This part is made out of Rubber and is Sold Individually. When putting the tire on a band saw Wheel, it may seem too small but it is not. Band saw Tires will typically come approximately 2 or more inches smaller than the Tire you're replacing. The old Tire stretches over time thus becoming less effective and eventually will break. Also, as Tire ages the rubber hardens and allows the Blade to slip. You would need to put the New Tire in Hot/Warm Water to heat the tire enough to make it pliable enough to stretch. Its preferred to use two people in the stretching process.
Tire 1341591
OEM part for: Delta
Part Number: 1341591
$124.55
In Stock
Ships within 1 business day 
Compatibility
This part will fit the following 4 machines
Delta
BS100 Type 1 Band Saw View Diagrams & Manuals
SM400 Type 1 Band Saw View Diagrams & Manuals
28-150 Type 2 Band Saw View Diagrams & Manuals
28-150 (Type 1) Band Saw View Diagrams & Manuals
This item works with the following types of products:
- Band Saw Parts
- Saw Parts
Repair Videos ?
Articles:
|
This article gives step-by-step instructions to loosen new bandsaw tires for easier installation. ...
September 25, 2009
|
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
10
4 stars
1
3 stars
1
2 stars
0
1 stars
0
< PREV
- 1
- 2
Fast service
New in the package worked like a top.
Guest -
December 29, 2021
Verified Purchase
Very easy to put on
The part was in great condition and went on beautifully
Thanks
Guest -
September 24, 2021
Verified Purchase
Great service - part arrived quickly
Glad the part came back in stock - arrived quickly after ordering and was a breeze to install. Re-tracking the blade took bit of time, but not due to the new belt/tire.
Guest -
September 21, 2021
Verified Purchase
Works great!
The parts were on back order for quite a while. But during the wait I received texts from the company reps explaining the hold ups. I like the way they kept in touch, old school. Outstanding Job!
Guest -
August 27, 2021
Verified Purchase
Delta band saw tire replacement
A tool store gave me your phone number to see if the tires were available since Delta is no longer in business. First it was good news you stocked the parts. Second it was a short delivery time even with the Christmas back mail back log. And third there was the installation hint about heating the tires to aid in getting them on the band saw wheels. The band saw was back in operation in a relatively short time.
DENNIS -
December 23, 2020
Verified Purchase
Tire for my band saw
Happy with my order, it fits, my band saw is in working order again...thanks
Guest -
November 14, 2020
Verified Purchase
Great part fits perfect
My band saw works perfect again
dennis -
August 8, 2020
Verified Purchase
Easy repair
Quick response, great part, easy install (5 min.) worked as expected
Rex -
July 3, 2020
Verified Purchase
I had band saw tire brake and this replacement tire was easy to install and the saw blade runs true now
Install this tire place in hot water for five minutes wipe dry and then install it
Guest -
October 4, 2019
Verified Purchase
Rebuild band saw
The parts worked great the band saw working like brand new like it did 60 years ago and the people that helped me with the order was great in helping me place my order Thanks
Guest -
June 4, 2019
Verified Purchase
t
t
t -
t days ago
Verified Purchase
eReplacementParts Team
t
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Tire
Is the price for one tire or is that for a set of two
joseph
asked on 2023-12-03
Hello Joseph, Thank you for your inquiry. We show these are sold individually. We hope this helps.
eReplacementParts Team December 03, 2023
How do I order just a couple of these tire parts for the band wheel. I don't need 25
Tommy
asked on 2022-12-13
Hello Tommy, Thank you for writing. The Tire Part Number: 1341591 is sold individually. The Availability: 25+ in stock just indicates we have over 25 of them currently in stock. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We hope this helps!
eReplacementParts Team December 13, 2022
What are the dimensions of this tire replacement?
Brian
for model number Delta Band Saw SM400
asked on 2022-07-28
Hello Brian, thank you for your question. Delta 1341591 #TP09 Manufacturing Tire, 8" x1/2" . We hope this helps. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
eReplacementParts Team July 28, 2022
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
The original tires were worn
Steve - November 30, 2015
👍 16 of 17 people found this instruction helpful
Tool Type
Band Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, no tool needed
Parts Used
I warmed the new tires in a bowl of hot water. I loosened the adjustment on the saw. I took the news tire out of the hot water and stretched it on by hand twice and slipped it on as I turned the wheels . They work great.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Old tire separated.
Lama - April 8, 2016
👍 7 of 7 people found this instruction helpful
Tool Type
Band Saw
Difficulty
Medium
Time
Less than 15 minutes
Tools Used
Screwdriver, Hands and clamps.
Parts Used
Place tire on wheel and clamp it, run tire around wheel and clamp again at 180 degrees opposite first clamp then stretch over rest of wheel.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The old tires on my Delta band saw broke due to age and hardening.
Richard - January 24, 2016
👍 7 of 7 people found this instruction helpful
Tool Type
Band Saw
Difficulty
Hard
Time
15-30 minutes
Tools Used
, My freezilng fingers
Parts Used
Don't try to put new tires on the band saw drums when the temperature in your work area is below freezing. It may be better to soften the tires in Hot water before stretching them on the drum, as their strength may be greater than that of your fingers. There has to be a simpler way, but if you are a novas like me you have to just pray and pull as hard as you can. It did help when I clamped the tire on one side of the drum as I stretched the rest of the tire onto the drum.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Top drive wheel tire broke
John - April 3, 2016
👍 4 of 4 people found this instruction helpful
Tool Type
Band Saw
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, allen wrench
Parts Used
I took the top wheel off to make it easier to stretch the tire on to the wheel. Once on, I reinstalled the wheel, and tightened the blade tension adjuster. Turned the wheel by hand to see that it would not walk off the wheel. Then closed the saw before testing it under power. It ran great. Checked inside once more and found every thing ok. Tried cutting so wood and my Delta band saw was ready to go. I have already used it twice since the tire replacement.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The tires on my band saw wheels were old and fell apart.
Michael - July 7, 2016
👍 3 of 3 people found this instruction helpful
Tool Type
Band Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, .
Parts Used
1. Removed the remnants of the old tires.
2. Replaced the new tires after I flexed and stretched them for about 10 seconds.
3. Started the tire on one side of the wheel and just walked it around like putting an inner tube in a bicycle tire. It was over 100 degrees in my shop so the rubber was very pliable.
2. Replaced the new tires after I flexed and stretched them for about 10 seconds.
3. Started the tire on one side of the wheel and just walked it around like putting an inner tube in a bicycle tire. It was over 100 degrees in my shop so the rubber was very pliable.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tires were cracked
larry - September 23, 2016
👍 2 of 3 people found this instruction helpful
Tool Type
Band Saw
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver
Parts Used
I was able to locate your YouTube video on how to put bandsaw tire on. Thank you. It was very helpful. Here is the link to it.
https://www.youtube.com/watch?v=LgzWFtI015o
https://www.youtube.com/watch?v=LgzWFtI015o
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The tires were worn out
Caroll - September 15, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Band Saw
Difficulty
Medium
Time
15-30 minutes
Tools Used
, 3rd hand
Parts Used
I soaked the tires in very hot water, then stretch them on the wheels.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
tire came off lower wheel on my bandsaw
Dave - January 24, 2019
Tool Type
Band Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, pinch clamp
Parts Used
ordered replacement tire and installed it. Very easy to do. Band saw back in business again.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
"tires" wore out
Dale - January 20, 2019
Tool Type
Band Saw
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, No tools required
Parts Used
Cleaned the wheels off, followed the tutorial of placing the new tires in warm to hot water to make them more pliable and stretched them on the wheels. Job done.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
The original parts(tires) on the wheels that helped keep the blade tension and spinning were broken and needed replacement.
Christopher - June 24, 2018
Tool Type
Band Saw
Difficulty
Medium
Time
15-30 minutes
Tools Used
Wrench Set
Parts Used
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
